Simplicity is Key! Not to mention, when you’re going for speed, weight is a key component... to the ounce. So, how much weight did that save? About 1.5 ounces. Still, can it be considered LEGO? The frame and steering is, but nothing else.
You can also reach 120 kmh... but you don't use lego motors so isn't a real lego record; someone else could use jet motor and reach 300 kmh.. I think that if you mean real lego car, you have to motorize with lego power functions and try to reach high speeds only using lego parts :)
Sir Hoodie Haha, I hope you're joking because that is stupid of you to say. Lego is made with an abs composite plastic which is strong itself, but since most structural parts have holes in them they are far weaker and are prone to be easily bend. This means that lego cannot withstand a force of 50g^2/3 per 10g^2 of surface. Get out of school before you make assumptions kid, you're just making yourself look like a fool on the internet, you fool.
MattL600's Technic you'd just need to give the axles and gears stability and lubricate them, although as you decrease the gear ratio it gets increasingly harder to move. I suppose lubrication could surpass that
Here’s the thing you might wanna remember 1. You go at speeds when an earodynamic frame would accauly make a good difference 2. Since it’s a single speed you lose a lot of potential energy upon launch and at lower speeds might wanna make a gear system would also go faster in higher gear but just wouldn’t launch in that gear 3. LEGO tires if not glued down at speeds of 50+ KPH tend to start slipping off so you lose traction and grip lowering energy delivery to the ground so you might wanna glue those down
This is an amazing model, even if not 100% LEGO. I like super fast things like this, and I think it's awesome. P.S. Read on to see the lecture for the not supportive people of the "COMMENT SECTION" Dun dun dun!!! Ok......people don't understand the limits of LEGO. If they want something fast, but the title says LEGO in it, people should only expect a relatively slow car, compared to what RC motors can do. But when they find something fast and really amazing, they comment that "its not LEGO". HOWEVER, it is technically not fake. The chassis and steering is LEGO. Also, if the title was, "Possibly the Fastest RC Car?", people would be commenting, "You used LEGOs. Therefore it isn't a real RC car." Most of the comments are saying, "It's fake in my opinion because you didn't use LEGO motors." Unless LEGO comes out with a new motor capable of exceptionally high speeds and torque (relative to previous LEGO motors), it is physically impossible to make an extremely fast LEGO car using 100% all original LEGO. So therefore, all the complainers that the car wasn't 100% LEGO aren't smart and can't use their brains as to why RC motors were required. I find this model amazing. It can do amazing speeds, considering the stress the LEGO parts would be under, this is AMAZING!! :)
for me, its fake because you use RC engine and not original lego, but i still like you creation and i will try too with engine 550 or nitro one :D nice vid !!!
You could actually made the car quite bigger and have a pneumatic angine running. They are bigger than the lego motors but really stronger, therefore you could possibly have some gears and make it faster, i guess.
Overthinking it : just lego is barely possibly to reach 80kmph. you'd need a railline, an sbrick or something for steering as the original infra red stuff is crap. but i think it is actually possibly with some xl motors for the air, pneumatic engine, some pre collected air in tanks and an sbrick or a railline for steering to hit 60 or even 80 kmph is you'd ask me
For all those, that want to see it move by Lego motors only: Go do it! You'll need to gear up quite a bit to get the top speed which will make acceleration a real problem. So either you find a way to figure out an entire gearbox or you need to stick a lot of motors on to combine their power.
would it be a "lego car" if you used all lego parts including computer but replaced the battery and motor with a lipo rechargeable battery and a high wattage brushless dc motor?
That could be true but when you are using a gear ratio to spin something faster, you also lowering the torque and then it would be harder to accelerate the car, that would work aslong if you don’t increase the gear ratio too much.
Hi Bador, ich hätte eine Videoidee bezüglich des 1,2 oder 3-Formats: und zwar, dass Du an Stelle von 3 Affen, die in verschiedene Pfade geskillt sind, 9 Affen platzierst(ich weiß, dass wohl eher schwierig ist, dies gut zu absolvieren, aber naja)d.h. Bspw. der Magieaffe ist hauptsächlich nach oben geskillt, gleichzeitig aber auch nach unten, bzw. in die Mitte geskillt; und hauptsächlich nach unten, und halt dann oben oder Mitte. Das bedeutet, man würde auf 6 Affen kommen, doch zusätzlich kommen dann noch die 3 Affen, die nur nach unten, oben oder der Mitte geskillt sind. Ich hoffe, dass es verständlich war. ; ) Ps: Geile Videos, mach weiter so, #TeamBador
Amazing feat of engineering. I have tried building one as well, but my motor is quite a bit bigger. Had an issue where I kept melting the beam holding the input shaft to the differential, even with lubrication. On a fresh beam I managed ~20 seconds of high power runtime, this is probably because my car was a lot heavier. I upgraded to a direct drive system like you 2 days ago, and it has been working out a lot better. Since I only have a single huge motor (6cm diameter, 9cm with tire) its a trike and doesn't have the best stability. I have really been struggling with getting a steering solution capable of handling speed, which is difficult as I need it on a bit larger scale than you. Now I kinda want to get another motor though after seeing this :)
uhh Bruno he said hobbyist parts for propulsion and/or stearing.. and btw depot you should consider doing a third version. and you should also leave a lin for all the parts
you could probably make it even faster and grippier with the truck wheels, or any other big wheel with an almost flat surface, could you please do that? that would be awesome!
the official lego company made a life-size replica of the Chiron. they used car parts too, THE OFFICIAL COMPANY USED CAR PARTS FOR CRYING OUT LOUD! if they don't mind parts from other brands being used then what gives you the right?
Very dope I love it. Why ya'll crying so much about the RC engine. They made a cool car which is fast as hell. Nobody says that "your" Lego only record is obsolete because of this
Everyone keeps saying it's not a real lego car because of the motors- everyone is forgetting to take onboard the fact that designing a reliable suspension let alone a chassis entirely out of lego is damn hard. What glue did you use on those tyres haha because they come off at like 2000 rpm without it
Steve Jones Films ? Are you a idiot he’s still going to get the notification dumbass and people comment on a comment 2 years ago and they reply I nearly see it on every video dumbass
How hot did those brushless motors get on the second version? What motor size, KV, and cell voltage? thinking about hub mounting some motors like this for a rc drift car :)
Try reducing the weight and making It sleekier(dont even know If that exists), so the drag coefficient is reduced and you get more speed with same engines and chassis. NICE work tho!
can you tell me what motors you used? I am quite impressed with this car I never thought such a fast lego car was possible. It puts mine to shame with such ease!
Awesome car ! But I’m sure you can reach 100 km/h by using better wheels (road tires, not Offroad tires) and a lighter chassis ! I like a lot the gyro system, it looks like a safety system. By the way, is there any possibility that you could sell your electronics ? And how much would it cost ? I am currently building an RC powered Lego car based on the Porsche 911 GT3 RS’ chassis, but must off the electronic has shut down and the motor is getting old. Best regards
shouldn't need to, in the video, I used a flysky RC car transmitter, nothing special. Is it a problem with the esc? maybe a communication issue with the radio signal?
@@rcdepot5899 that's why I think yours works. Cause outrunner motors need a flight controller to work right, and the flysky systems have built in ones. And both of the secs are good. You are also using ground escs and not air escs like the outrunner motors usually have so maybe that's why it can work without flysky.
When I get my next car, I want it to have 'independent rubber band suspension'.
Simplicity is Key! Not to mention, when you’re going for speed, weight is a key component... to the ounce. So, how much weight did that save? About 1.5 ounces. Still, can it be considered LEGO? The frame and steering is, but nothing else.
You can also reach 120 kmh... but you don't use lego motors so isn't a real lego record; someone else could use jet motor and reach 300 kmh.. I think that if you mean real lego car, you have to motorize with lego power functions and try to reach high speeds only using lego parts :)
agree
only motor fans TRIGGERED as that requires a lot of gears to up the speed
You can't lego is very weak and would break in the stress before.
Sir Hoodie Haha, I hope you're joking because that is stupid of you to say. Lego is made with an abs composite plastic which is strong itself, but since most structural parts have holes in them they are far weaker and are prone to be easily bend. This means that lego cannot withstand a force of 50g^2/3 per 10g^2 of surface.
Get out of school before you make assumptions kid, you're just making yourself look like a fool on the internet, you fool.
MattL600's Technic you'd just need to give the axles and gears stability and lubricate them, although as you decrease the gear ratio it gets increasingly harder to move. I suppose lubrication could surpass that
Can u try to build this engine into the new LEGO 42083 - Bugatti Chiron? :) Is that possible? Greetings from Germany :)
I would love to, but it is quite expensive for me. It wouldn't be too hard to convert it to go, say 50km/h at least. Greetings from Canada :)
I think it ain't doable. or you'd have to remove interior parts and take away the nice look.
Glaub ich nicht das Ding kostet über 💯 euro
@@rcdepot5899 buy the fake one lepin
@@batery5156 jub. Glaub sogar fast 300 euto
I love how you used a 1:1 gear ratio, very nice.
the "no gear ratio"
Its not it has. Differential which is slower
@@joshpatch8233
2:05- no dif.
This dude wisely remove it.👍
I got the fastest lego car without esc
2:25 guess he must have hit 88mph
Here’s the thing you might wanna remember
1. You go at speeds when an earodynamic frame would accauly make a good difference
2. Since it’s a single speed you lose a lot of potential energy upon launch and at lower speeds might wanna make a gear system would also go faster in higher gear but just wouldn’t launch in that gear
3. LEGO tires if not glued down at speeds of 50+ KPH tend to start slipping off so you lose traction and grip lowering energy delivery to the ground so you might wanna glue those down
You're making friction assumptions?
2:16 PM
6/24/2020
Imagine using a multiplicator gearbox on something like this.... that's what I'm going to do soon
And the simplest one. It needs bigger wheels
@@R0V0lv0 bigger wheels = slower
there are better tires out there also lego balloon tires have one of the highest rolling resistance
3:01 thats some active camber dude!
This is the GOOD DRIFT MAN
3:13 what a smooth transition
This is an amazing model, even if not 100% LEGO. I like super fast things like this, and I think it's awesome.
P.S. Read on to see the lecture for the not supportive people of the "COMMENT SECTION" Dun dun dun!!!
Ok......people don't understand the limits of LEGO. If they want something fast, but the title says LEGO in it, people should only expect a relatively slow car, compared to what RC motors can do. But when they find something fast and really amazing, they comment that "its not LEGO". HOWEVER, it is technically not fake. The chassis and steering is LEGO. Also, if the title was, "Possibly the Fastest RC Car?", people would be commenting, "You used LEGOs. Therefore it isn't a real RC car."
Most of the comments are saying, "It's fake in my opinion because you didn't use LEGO motors." Unless LEGO comes out with a new motor capable of exceptionally high speeds and torque (relative to previous LEGO motors), it is physically impossible to make an extremely fast LEGO car using 100% all original LEGO.
So therefore, all the complainers that the car wasn't 100% LEGO aren't smart and can't use their brains as to why RC motors were required. I find this model amazing. It can do amazing speeds, considering the stress the LEGO parts would be under, this is AMAZING!! :)
Just to say, it was extremely COOL. Wow! I didn't thought this. Really possible? Really impressive work. Congrats man!
Usain bolt: in fast a fucc boi
The lego remote car: sonic the hedgehog
The camera man:
This probably doesnt count bc the motors arent lego but still impressive enough for a like.
It rolls on Lego wheels so I consider it the faster Lego car
2:48 ohhh 😍 look at the Suspension beautiful
Watch this if you like beatuiful suspension :D ruclips.net/video/mO2maq51yz0/видео.html
EL Valenin ohhh 😯
Goodest drift ever made
Plz make it drifting and make it look like a 240sx
for me, its fake because you use RC engine and not original lego, but i still like you creation and i will try too with engine 550 or nitro one :D nice vid !!!
Lamp1K that still counts
You could actually made the car quite bigger and have a pneumatic angine running. They are bigger than the lego motors but really stronger, therefore you could possibly have some gears and make it faster, i guess.
Overthinking it : just lego is barely possibly to reach 80kmph. you'd need a railline, an sbrick or something for steering as the original infra red stuff is crap. but i think it is actually possibly with some xl motors for the air, pneumatic engine, some pre collected air in tanks and an sbrick or a railline for steering to hit 60 or even 80 kmph is you'd ask me
Wow pretty fast but put a gas moter in it
He didn't say that it was with only pure lego parts in the title...
While I understand the merit of an all-lego car, this is still quite a fun build!
how many cells does that lipo have??
Song: xenogenisis by The Fat Rat
I managed to reach a speed of 20k/h with stock lego parts
For all those, that want to see it move by Lego motors only: Go do it! You'll need to gear up quite a bit to get the top speed which will make acceleration a real problem. So either you find a way to figure out an entire gearbox or you need to stick a lot of motors on to combine their power.
That would be the most beautiful RC crash ive ever seen! Thats not meant to be rude, it would just shatter so nicely at high speed!
Been 2 years, time for the V3 upgrade :D
Please add a multiplicator gearbox
Now imagine that running into a wall, legos would go flying.
This is the first video I watched and within 2 minutes of the video I was subscribed.
just how fast and light this thing is is already visible from how frequent this thing does wheelies
I agree this isn’t really all LEGO, but it’s still cool
I tried making a fast lego car, but the battery is to heavy, motors are too weak, and you need the prefect gear ratio
very cool, even if not fully lego, didnt know those parts could handle that much stress :D
non lego components are one thing but the motors on the tires. come on
3:01 GREAT DRIFT!
Good Choice in songs and good job on the car
I think this is not a real lego car, it is just a normal rc car with lego chassis
The Chassis is fully lego
This is just some reinforcements for the esc and other componets
A lego motor is not very powerful so if you want build something fast you need a bigger more powerful motor
would it be a "lego car" if you used all lego parts including computer but replaced the battery and motor with a lipo rechargeable battery and a high wattage brushless dc motor?
@@ZilongNez or use gear ratios to spin the wheels faster.
That could be true but when you are using a gear ratio to spin something faster, you also lowering the torque and then it would be harder to accelerate the car, that would work aslong if you don’t increase the gear ratio too much.
Hi Bador,
ich hätte eine Videoidee bezüglich des 1,2 oder 3-Formats: und zwar, dass Du an Stelle von 3 Affen, die in verschiedene Pfade geskillt sind, 9 Affen platzierst(ich weiß, dass wohl eher schwierig ist, dies gut zu absolvieren, aber naja)d.h. Bspw. der Magieaffe ist hauptsächlich nach oben geskillt, gleichzeitig aber auch nach unten, bzw. in die Mitte geskillt; und hauptsächlich nach unten, und halt dann oben oder Mitte. Das bedeutet, man würde auf 6 Affen kommen, doch zusätzlich kommen dann noch die 3 Affen, die nur nach unten, oben oder der Mitte geskillt sind. Ich hoffe, dass es verständlich war. ; )
Ps: Geile Videos, mach weiter so, #TeamBador
basically a hobby-grade rc car with a hobby-grade rc plane's motors
It's a cool car but it's a bit sad that it doesn't have that much to do with lego technic anymore but it's definitely a speed record breaker
The caster is crazy when cornering!! Needs an anti-roll bar!
Amazing feat of engineering. I have tried building one as well, but my motor is quite a bit bigger. Had an issue where I kept melting the beam holding the input shaft to the differential, even with lubrication. On a fresh beam I managed ~20 seconds of high power runtime, this is probably because my car was a lot heavier. I upgraded to a direct drive system like you 2 days ago, and it has been working out a lot better. Since I only have a single huge motor (6cm diameter, 9cm with tire) its a trike and doesn't have the best stability. I have really been struggling with getting a steering solution capable of handling speed, which is difficult as I need it on a bit larger scale than you. Now I kinda want to get another motor though after seeing this :)
Perfect time for a car to speed in my driveway (it gave it sound effects)
Hey, could you make tutorial for the LEGO part, please (not RC and electronics, only LEGO)
uhh Bruno he said hobbyist parts for propulsion and/or stearing.. and btw depot you should consider doing a third version. and you should also leave a lin for all the parts
I love the outro music fr
Thanks for the inspiration! Your V1 car is what led me to build something like this myself. Albeit with 4wd.
i love how the background is dark paradise from geometry dash.. I think is… lmaooo 😂
superb creation! would not want to touch those wheels lol i learnt my lesson after touching my rc lego battlebot weapon
you could probably make it even faster and grippier with the truck wheels, or any other big wheel with an almost flat surface, could you please do that? that would be awesome!
3:15 no one gonna talk about that transition
I'm literaly posted same comment 3 hours after XD
Children saying its "fake" but want it outfitted with a body anyway. Ok.
A lego motor is only so powerful, kiddos.
yes the lego motor can only do so much, but gear ratios have more potential.
so he should use gear ratios effectively and not mislead viewers
You can use gears to increase speed and multiple motors to make up for torque
Benzodiazepine you’d be surprised what a few good gears could do ;)
the official lego company made a life-size replica of the Chiron. they used car parts too, THE OFFICIAL COMPANY USED CAR PARTS FOR CRYING OUT LOUD! if they don't mind parts from other brands being used then what gives you the right?
We need a 2020 version
When you're too broke to just buy a slash lol
Very dope I love it.
Why ya'll crying so much about the RC engine. They made a cool car which is fast as hell. Nobody says that "your" Lego only record is obsolete because of this
Everyone keeps saying it's not a real lego car because of the motors- everyone is forgetting to take onboard the fact that designing a reliable suspension let alone a chassis entirely out of lego is damn hard. What glue did you use on those tyres haha because they come off at like 2000 rpm without it
2:27 Teleportation?
You name that editing
ProBricks he made a joke dumbass
@@africancouscous whos the idiot here you responded a year later. you think hes gonna reply
Steve Jones Films ? Are you a idiot he’s still going to get the notification dumbass and people comment on a comment 2 years ago and they reply I nearly see it on every video dumbass
@@africancouscous Lets see if he replies
INCREDIBLE! love what your doing!
How hot did those brushless motors get on the second version?
What motor size, KV, and cell voltage?
thinking about hub mounting some motors like this for a rc drift car :)
That went from 0 to 100 real quick
Try reducing the weight and making It sleekier(dont even know If that exists), so the drag coefficient is reduced and you get more speed with same engines and chassis. NICE work tho!
You should add an electrical shift mechanic so that you can quickly bring it up to speed
The car probably had to meet its end..... until it gets some repairs
how did you get anything to not melt in the drive system
2 BRUSHLESS RC VEHICKE MOTORS THAT SPIN REALLY REALLY FAST
2:27 It use Za Warudo
3:01 me playing Asphalt 9:legends with too much drift be like:
What a good video keep going i like those things
Okay I'll have to admit this is the most insane I've seen in lego's history. Also love those wheelies, make a monster truck next time? lol
If you put bigger wheels on the rear it would slightly increase top speed
Alternative title fast non lego components on a LEGO chassis
2:58 P.O.V when you are late for school and your dad sent you to the school
Im surprised that the brushless motor didn't tern the Lego gears into plastic jelly
Love your video incredible
Holy shit, That's hella fast... Nice build dude
I think there is a lot of inefficiencies in this design such as the tires, aero or there lack of, and weight
can you tell me what motors you used? I am quite impressed with this car I never thought such a fast lego car was possible. It puts mine to shame with such ease!
1:18 Dont get mad at me, but I believe it is called an accelerometer
insane how sturdy lego pieces are
people are saying it's fake because of the motor and etc... and people don't realize the gear ratio and time to get up to speed IF IT WAS lego
Use gears. You can get much faster by putting a bigger gear on the output shaft and a smaller one on the axle
Nice build nice presentation
Ik my comment is late, I enjoyed this vid and u should add some light weight coverage on it so the pieces dont get damaged
Awesome car ! But I’m sure you can reach 100 km/h by using better wheels (road tires, not Offroad tires) and a lighter chassis ! I like a lot the gyro system, it looks like a safety system.
By the way, is there any possibility that you could sell your electronics ? And how much would it cost ?
I am currently building an RC powered Lego car based on the Porsche 911 GT3 RS’ chassis, but must off the electronic has shut down and the motor is getting old.
Best regards
It'll cost you about $300 bucks for a cheap combo.
MattL600's Technic It’s expensive but damn cool
French Technic worth it for sure lol and you can reuse it on a proper rc
I stuck a lego brick on the room of my car, and that went way faster than this. Where's my record for fastest lego car?
Hahahah
I feel like this isn't that fast, you would have to use a gearing setup to get it to be much faster.
brilliant project
That feeling when a damn lego car is faster than you while riding a bike...
imagine getting a lego car pulled over
What kind of body shell are you equipping?
3:48 thank me later 🌚
I see you're a cat of culture aswell XD
No
why u didnot recorded that speed from gopro camera in car? or it was making cat aerodynamic worse?
Bloody hell thats fast!
next thing to do is make it 4x4 so you can go offroad
Next time are you going to shape an Aventator with LEGO and call it LEGO!
Nice Are you using gears to make it go faster ?
plsss make instructions for that. love from czech 🇨🇿
Wait, it uses brushless motors? So... induction motors on a vehicle?!?
*ELON MUSK JOINED THE CHAT*
Hey I got outrunner motors but cant get them to work. Do I need an rc plane transmitter and reciever?
shouldn't need to, in the video, I used a flysky RC car transmitter, nothing special. Is it a problem with the esc? maybe a communication issue with the radio signal?
@@rcdepot5899 that's why I think yours works. Cause outrunner motors need a flight controller to work right, and the flysky systems have built in ones. And both of the secs are good. You are also using ground escs and not air escs like the outrunner motors usually have so maybe that's why it can work without flysky.
Technically its not entirely lego, but its cool!
Funny how this guy likes comments saying it doesn't matter that it isn't fully lego and ignores those who say it does
AMAZING
Man ...the motors are for RC airplane