Radiolink Crossflight Drone Full Programming II Mission planner II Aircrafts#
HTML-код
- Опубликовано: 15 сен 2024
- Here is the Link to Download ArduPilot Mission Planner
ardupilot.org/...
You can also Download Radiolink Mission Planner
radiolink.com.c...
The default Firmwere in the Crossflight is quadcopter, if you want to make any other model you have to upgrade the Firmwere of Mission Planner.
Note: The Firmwere upgradation can only be done using Radiolink mission Planner in crossflight
If you like this video please give it a thumbs up and Subscribe my Channel ##Aircrafts##Attitude
Bhai gps neo7m ki wiring batao please
Is this mini pix the same as the holybro mini pix 6C?
Sir, How to setup OSD cable and Micro SD Card...
@Somnathhalder914
1. I am using DJI naza as my flight controller. My drone take off is stable, but when I use roll or pitch then it struggles to get stable (wobbles) and flips downwards to ground. Can you pleass help me with my problem... its flipping to ground.
2. I am using Fs i6 transmitter. When I place throttle stick above 50% then motor speed increases and at almost 80% movement of throttle stick motor is at max speed. But when I decrease the throttle stick the motor speed does not decrease till throttle stick is 50% or below.
Can I please get ur personal contact your help is required on this plz...
Hello,
1. I am using DJI naza as my flight controller. My drone take off is stable, but when I use roll or pitch then it struggles to get stable (wobbles) and flips downwards to ground. Can you pleass help me with my problem... its flipping to ground.
2. I am using Fs i6 transmitter. When I place throttle stick above 50% then motor speed increases and at almost 80% movement of throttle stick motor is at max speed. But when I decrease the throttle stick the motor speed does not decrease till throttle stick is 50% or below.
Bhai mera mai 13 v hi dikha rha hai
Bro konsa gps module use Kiya hai apne ?
@@FXZElectronic m8n
Can I program with ardupilot mission planner for radiolink flight controller
You can use ardupilot mission planner as well as radiolunk mission planner for parameter settings but if you want to upgrade the firmwere you have to use radiolink mission planner only
Can I add additional servomotor and program with ardupilot mission planner, lastly how to download radiolink mission planner I don't understand Chinese or Korean language from there website lol.. please make a video on that nobody in this RUclips community made it!
Please i will be so happy to you sir
@@pewangnaga2503 you have to use 4 channels for controls (aileron, elevator, throttle, rudder) and one extra channel for flight modes, that means five channel radio is mandatory, I am using 6 channel radio so I have an extra channel to control the servo, if you use 9 channel radio you can use 4 servos independently.
For downloading mission planner you can go to google and search download mission planner I am sure you will find some website in english so that you can understand the language and download the softwere!!!
Bhai jab mai alt hold mode mai 50% throttle deta hu uske baad motors apne aap rotate hoti hain or potantial throttle loss (3) ka massage show hota hai pleaae koi sollution dijiye
@@Trymbak13 did youcalibrate your esc?
@@Somnathhalder914 yes
@@Trymbak13 if not then connect your drone to your desktop/laptop and go to esc calibration and click it then disconnect the usb from your desktop/laptop, then connect the battery to your drone and wait for the esc calibration sound to go and then your problem will be fixed if your motors, escs and battery has no issues!!!
mera esc calibration nahi ho ra hai
Bhai no gps likh rha ready to sky ka hai m8n help kr do
This happens when your gps do not connect with sufficient sattelites, for safe loiter mode flight you need to get connected with atleast 12 sattelites, try to go out side of your room or a bigger open place I am sure your problem will get resolved!!!
Sir can I get your number,
I have to show my project and very less time is left. Plzz help me sif
@@YuvrajSingh-ux4vv somnathhalder914@gmail.com send your contact no in this mail I will contact you
Ok thank you so much sir
Hi Somnath,
First of all your drone videos are very engaging and helpful. Thanks you so much for posting these.
I am facing a problem. I have Radiolink Crossflight controller. I have calibrated all its paramters on Mission planner software. Not when I tried flying it gets flipped to 1 side only. I have also seen that when i push 30% throttle on remote then only 1 motor runs and when I give 40% throttle then 3 motors run and when its 50% then all the motor starts running.
Can you please tell me what should i do, so that it does not gets flipped to 1 side and gives balanced takeoff flight? Also the motor running mismatched is the cause of flipping and if yes whats the solution to it?
arm nahi ho pata kabhi kabhi, message aata hai mission planner mein ki - prearm: battery is critical failsafe < low . But battery full charged hai 12.5 volts hai.
failsafe mein maine 10.1 volts save kia hua hai. Aur battery monitor mein bhi sahi dikhara hai battery 12.49 volts.
To issue kahan par hai. Please help
Mere sath bhi ye problem hota hai kabhi kabhi, battery ko kholkar dobara lagane se thik ho jata hai, may be the voltage and current censor in the flight controller sometimes gives faulty values, it does not cause any serious problem in my case, all I do is unplug the battery then plug again.!!!
Hi how to contact you