@@WakaflokaflizzlI only remember one episode. Where they put a whole "gaming" setup in the bed of a truck. That if I recall had a hydraulic lift to pivot the bed up for viewing. Ruined a truck. But still kinda cool.
On the "Are there different carbon fiber patterns?" Technically, yes there are. They're just not very common or not very interesting. The weave you see there is the most common. You have different weights(thicknesses) of the CF, different widths of the weave and different patterns like unifiber, V, etc. If you can make the strands into a flat or round thread and make that into a pattern, you can make parts out of that. But the 0-90 crossweave is the most common and you can buy premade CF plate in different thicknesses and it is cheap.
Different weaves are actually very interesting, especially in motorsports. Trading off stiffness in one direction for stiffness in another direction, or weight vs. strength, etc.
@@Matt19634 Oh yeah. Going from unifiber tow, to -30-60, to cool looking patterns all the way up to the CNC placed patterns of CF for large wing structures, CF composites and FG composites are Really cool. They can tune how the structure reacts to loads as needed and make things stiff in one direction and relatively pliable in another, while forming complex geometries and have it all support 300 people moving at Mach 0.8 30,000' in the air.
On a part that actually benefits from carbon, I'm a sucker for injection molded, strain-oriented fibers, like in ENVE's bike parts. But I guess that's too subtle for those who just want to show off. Still, even a 12K plain weave would be more interesting that a bog standard 3K plain weave.
Yea they really went for one of the cheapest layups they could get, really should have gone for a higher weave count. But that might be what Lamborghini use on the show parts of their cars
this THEORY works on any car with any brand name, it's all just metal and plastic, but for some reason the one is 40.000 and the other 2,500.000 ( I REPEAT THIS IS A THEORY AND EXAMPLE )
with the carbon fiber part, yes there is more patterns but they're just harder to make. And there is also forged carbon which looks amazing and is really strong
In their defense, this is a water cooling focused case, if they used a AIO or custom loop the screen would be way more visible. Not sure why they went with air cooling....
Filming time is expensive. It's not worth the time to cut tubes, pressure test loops and have to drain the loop. An AIO would have been a better choice but it's still another 20-30 minutes of work if the fans aren't already mounted and more complication with setting up the RGB.
Just found one of these and placed the order. I have an H6 Flow and am just not looking to take any more chances with NZXT (would rather replace it before someone finds out it has an IO issue or something)- I have had an O11 before - but this one just looks really nice and has some solid quality of life / useability upgrades.
A lot of more-expensive cases don't come with fans because if you're spending a bunch on a case (let's say, $300), chances are good you already have specific fans that you want to use, so any fans that were added to the case would just get tossed aside. Even if they're solid Lamborghini-branded fans, the person using the case may be going for Corsair, Noctua, be quiet! or someone else. Also expensive cases generally aren't paired with air coolers... :D
i just dont see the harm in spending 100$ on a decent iawata air brush...and youtubing how to airbrush/stencil work....and just doing your own DIY paint job....and ofc heat gun/tint wrap the windows etc...on any build/chassis of IDEAL choice. IN regards to form factor air flow aesthetics etc. Its actually quite simple just some scuffing/scotchbrite some water based paint/airbrushing....and some rattle can/gloss clear coat...which you can also layer up/a lil wet....then polish....and add a second coat/polish for a clean look.....which can equally be re sanded/painted if need be for a refreshed look. IDK i come from a 1st wave FULL OUT SLI/custom pc YT influence....as where i learned about PC's and have only seen "things" evolve since then. Dudes that would get things cusom painted/powder coated/annodizded aluminum etc. Even painted watercooling parts. VS the age were still somehow in or now in 2024...the RGB on its last leg...what else can i waste $$$ on vs skill aesthetics.
@@anhiirr If you have the tools, the talent, the patience, and the time, sure, you can do something as good as this if not better. A lot of people don't have at least some of that. A lot of people I know are missing at least two of the four I mentioned, so buying a case like this is the way to go if this is what they want.
@@MindstabThrull The way i see it as a hobby/passion "GAMING" building a pc or an expensive build already takes time/ingenuity career etc Life spent to earn such a build....that a little more "know how" TO REALLY understand what youre getting into goes a long way. VS ppl that genuinely get involved with this kind of stuff for the HEY LOOK AT ME factor...the way im saying it is that PURE/MOTIVATION to have a PC and hey look at me POINTS largely come in part to proving the know how/knowledge work and proving how my you were willing to execute to your highest "desires" in a build. The aesthetics mean nothing if these pcs have bad temps sustained clocks...multi run benchmark score drop off....poor 12v rail performance on their psu hot psus....generally a PC that will encounter large Voltage/degredation. It completely misses the point of Building/custom building acquiring the tech/budget range for an ideal build. ESP if it only PURELY looks the part....IJS if youre willing to save/invest towards something thats going to be special to you or if you REALLY want it to be considered "SPECIAL" it would require the time it takes to teach yourself how to do these things or to actually have a 1 of 1 build. It just shapes you differently as an owner/enthusiast. VS just trying to buy your way to a status....that pcs/gaming/gaming industry cant really equate the yields of in regards to "RETURNS".
I'm happy with my original Evo, but I did pre-order one. I used to work for a Lamborghini dealer, and offered to build a showcase for their receptionist's workstation
I actually think that this display cable is smart because it seems there are many USBs on the back and only one or two headers inside on newer boards and those are usually occupied by fan controllers, AIOs and such.
sooo, the onboard screen is directly in front of the exit of the CPU cooler instead of a exhaust fan .... that will be wonderful for the thermals and longevity of the screen ... not :3
I think 0000-number cases are just for reviewers because every reviewer gets a 0000 number. It's a good strategy to avoid reviewers reselling limited edition cases.
@@RadialSeeker113bruh, dumbest thing you could say, makes me realize how little you know the company, it's one of the biggest holding groups in the world. Just so you know, they don't only make cars, if anything, car marketing for them is just a tiny percentage of their whole operations Also stocks have rapidly grown in the past five years, lol
No. That’s not how any of this works. That “X out of X” is a predetermined number. They do not exceed that many units unless it’s for a specific specific (intentional) reason. Lamborghini always did one off cars. Not sure what special editions are you referring to.
@@Iridiumcosmos I'm referring to multiple vehicles from Lamborghini, Ferrari, and other manufacturers having having duplicated numbers. "X of Y" is marketing not legal.
The monitor has to be plugged regardless into your motherboard or GPU, otherwise, you know, no screen signal. This is clearly a classic O11 with some minor adjustments, but they are using the same process, the same modeling. So asking them to revolutionize the whole case structure just to hide a cable on the back of your pc is probably not the smartest thing. You could argue they could since it's a limited case, but it's even less cost effective especially cause it's limited units
It actually only takes seconds to make a mirrored glass panel that looks even better than that, VViViD makes window privacy film and it is only 15USD for 30"/76cm X 6.5'/198cm.
I tried that mod, but getting it actually free of dust particles and cut to size perfectly is way harder then it looks.. Wasted quite a few rolls and gave up in the end. Literally 1 or 2 dust specs that get trapped every. single. time.
This is classic like you did i think it was the NBA merch, Lamborghini loves to just put a logo on something and charge crazy money for it with almost nothing added usually
I don't get why the screen is there, nobody is looking at the back of the case especially if you have air cooler. You'll pay 140$ for screen that is barely visible and some vinyl stickers on the case.
ppl that dont know what Riva tuner is or Afterburner. Think theyre going to install 2-4k worth of hardware in this....and run some 3dmark...to ladder climb an air build in a 011 XL XD....and wants to look at their chassis for "temps" so they can max out their v core and voltage CURVE to sustain highest CLOCKS possible....CLEARLY the demographic spending on something like this....Definitely not ppl penny pinching their builds to OC their gpus to Punch a whole SKU higher....XD ive seen ppl with 300$ cpus....and more invested in LIAN Li fans in their 011 builds....i cant act like this chassis isnt more often with builds poorly executed than proper ones NGL.
Those HDDs do in fact need air, and only get it if you mount the side fans on the inner side of the case as opposed to back side. They also need to be at a decent RPM. I have the O11 XL with 4 HDDs and found that HDD temps approach 60C if you don't do it that way.
not to mention how a poorly optmized HDD orientation also adds to chassis heat...if a lower quality psu/heat setup is also soaking up....talking huge degredation on PSU within first few years of use...considering the voltage ranges these days on newer DDR5 systems and modern 3ghz gpus. Looking at huge HITS to SOC and system voltage within lifetime of ownership and occasional "declocking" and loss of sustained "as advertised" all core potential as well...within 1 year of heavy use. Sad state of affairs how much responsibility goes into the hands of an end user or larger budget/use range BUILD these days...yet a properly tuned modern/ai equipped laptop can do a slew of workloads that the majority of "older" gen cpu/chipsets etc can achieve. Still blows my mind that for the most part these 1st gen AI setups are mostly inclined to managing these voltage "issues" on flagship/end users builds....so that "modern" ultrabook/etc professionals dont see these voltage creeps and spikes as cpus go from dormant/low load to fully loaded/clocked in the span of seconds if not fractions. Its almost a tell that Intel/amd are fully aware of how much OS/coding hops into causing so much idle voltage and spikes/resistance heat at the snap/drop of a hat with these modern 2-300w cpus on a desktop system. Or the heat soak for these cpu/blocks for air/AIO and how they fare with high/load uptimes.
got one on route to me now but would admit i would prefer to change the screen to a custom screen like afterburner on it (just so i can have gpu and cpu temps at the same time) rather than the lamborghini stuff but it can switch between the two so i'll just have to deal with it. also going to have to get a few more fans as my current setup only uses 5 fans at most i think 2 sets of basic p28 lian li uni fans should do as i want a slightly more blacked out version.
That is so strange. JayzTwoCents has made a video yesterday about this exact same case! Im wondering if all the press release cases are numbered 0000 of 6498! His has the exact same product numer! Just check his video at 2:14 I believe and it shows! You would think they would say something about that to avoid confusion! I have to say though Lian Li has always seemed to go above and beyond as far as im concerned so I'm absolutely sure there is a very good reason for the discrepancy!
It took Lian-Li a few months to get a digital signature for L-Connect 3. Windows Defender kept picking it up as malware. Does the software for this screen have a digital sig to prevent that from happening?? And at $299 that better be real carbon fiber everywhere!!
I wish you could put anything on the internal screen. Should have came with fans all around. Mirror finish is meh. Edit: 12:00 "can I get a woo?" Awooof.
Someone get this man more atx cases to work on. I mean, 80% of this is just a review of the evo case in itself. They prolly picked Adam to do it to make it sound that more interesting. Alex and Jake would be a whole lot less impressed I would think.
A case at that price point should NOT have fans included because it should assume that you're a nerd enough to have your favourite fan (noctua). I hate all the cases that include fans - they all go straight to the landfill.
Come on, they'll make a BtF/Stealth/Zero/Whatever variant of basically this case at some point. They'll have to change a few more things, might call it a new series, but it'll generally be this. And i think i want it. Not the Lambo edition, no thanks. Also, no fan in the back, bad choice. The screen there, why ? I am also just waiting for an AIO that basically has a screen on top that covers all up to the memory and the GPU. Gotta happen at some point. I am sticking to aircooling though. Cheaper, can look good, less prone to failure, less massive failure, cheaper and really fast to fix, if you really want a screen on it, those exist too. And yup, the pricing is ridiculous.
I mean, this case is pretty silly regardless of how you look at it, but sticking an air cooler into this case is just dumb. It's specifically designed for 360mm radiators, and the fan layout really doesn't make sense otherwise.
Oh god that case is so LAME! With a colab with a company like Lamborghini I would at least expect a wicked custom case with sharp edges and sick lights just like a real Lambo. This is just another ordinary stupid box case. Literally nothing to do with Lamborghini. L case.
Is it easy to remove that Lamborghini logo from the front? It spoils the look of the case. The logo should have been etched into the glass; visible but almost invisible.
"it's the same case" except it's not. Not even remotely the same quality as an actual Lian Li case. Cheap thin steel instead of aluminium on the outside. Thinner glass. List goes on. Stop recommending cheap, second rate knock offs.
A screen on the back of the case? That's as stupid as the pimp my ride episode where they put a screen under a car...
It's not on the back it's on the inside back so it's entirely visible actually a nice place for it
Bro don’t do this…you bout to send my ass on a whole pimp my ride rabbit hole 😂😂😂😂
Yeah he didn't think much of it 😅@@Wakaflokaflizzl
@@WakaflokaflizzlI only remember one episode. Where they put a whole "gaming" setup in the bed of a truck. That if I recall had a hydraulic lift to pivot the bed up for viewing.
Ruined a truck. But still kinda cool.
it would be fine if these idiots hadnt installed a massive air cooler rather than an AIO like the case is obviously designed for...
On the "Are there different carbon fiber patterns?" Technically, yes there are. They're just not very common or not very interesting. The weave you see there is the most common. You have different weights(thicknesses) of the CF, different widths of the weave and different patterns like unifiber, V, etc. If you can make the strands into a flat or round thread and make that into a pattern, you can make parts out of that. But the 0-90 crossweave is the most common and you can buy premade CF plate in different thicknesses and it is cheap.
Different weaves are actually very interesting, especially in motorsports. Trading off stiffness in one direction for stiffness in another direction, or weight vs. strength, etc.
@@Matt19634 Oh yeah. Going from unifiber tow, to -30-60, to cool looking patterns all the way up to the CNC placed patterns of CF for large wing structures, CF composites and FG composites are Really cool. They can tune how the structure reacts to loads as needed and make things stiff in one direction and relatively pliable in another, while forming complex geometries and have it all support 300 people moving at Mach 0.8 30,000' in the air.
On a part that actually benefits from carbon, I'm a sucker for injection molded, strain-oriented fibers, like in ENVE's bike parts. But I guess that's too subtle for those who just want to show off. Still, even a 12K plain weave would be more interesting that a bog standard 3K plain weave.
Yea they really went for one of the cheapest layups they could get, really should have gone for a higher weave count. But that might be what Lamborghini use on the show parts of their cars
@@cybertonto72 they could have put a coloured thread in to add accent colour
2 dollars of carbon fiber wrap and reflective coating on the glass, a 20 dollar IPS display and 140 dollars of Lamborghini branding.
this THEORY works on any car with any brand name, it's all just metal and plastic, but for some reason the one is 40.000 and the other 2,500.000 ( I REPEAT THIS IS A THEORY AND EXAMPLE )
hey its all part of the fun
If you take their statement as truth it has real carbon fiber tho...
@@strubbleler No. You don't buy just the car frame. Car price tag also the reflect of the high performance parts inside.
except it's real carbon fiber lol
Adam, your taste in shirts astounds me.
he's got some pretty cool shirtz
Dude you are paying $100 at least for that LCD screen and you mount an AIR COOLER in front of it? Why
2:44 that accent color looks alot closer to something like verde scandal than the giallo
Could be trying to be Giallo Tenerife? It's not too far from that. Nowhere near as green as Verde Scandal.
to me it looks like the Porsche carbon brake option, the yellow that they use on the calipers on cars with factory carbon brakes
@@jubuttib😮😮😮😮😮❤️❤️❤️❤️❤️
I don't know if that's the video or my display but they look exactly the samr as the ones I have on the most basic corsair 4000d
@@jubuttib that one it is, thank you
the paint is lambo black, supplied by lambo the same as ford but 10 x the price
painted with a lambo paint gun too for added "quality" in a lambo booth with lambo compressors.
I do like how ford parts fit on lambos. The indicators from a focus was used on a lambo as well.
The price was expected, it was as expensive as always when an automaker decides to dip into the tech market for some rather silly one-off product.
The Secretlabs Lambo chair complements this, lol.
the lambo badge is the $150 lol
The Lian-Li O11 Vision also has a chrome version with this reflective look. :)
with the carbon fiber part, yes there is more patterns but they're just harder to make.
And there is also forged carbon which looks amazing and is really strong
In their defense, this is a water cooling focused case, if they used a AIO or custom loop the screen would be way more visible. Not sure why they went with air cooling....
Filming time is expensive. It's not worth the time to cut tubes, pressure test loops and have to drain the loop. An AIO would have been a better choice but it's still another 20-30 minutes of work if the fans aren't already mounted and more complication with setting up the RGB.
The thumbnail is some creepypasta smile. (it's the lighting/editing i know, still looks like he's staring right through me and the wall behind.)
Just found one of these and placed the order. I have an H6 Flow and am just not looking to take any more chances with NZXT (would rather replace it before someone finds out it has an IO issue or something)- I have had an O11 before - but this one just looks really nice and has some solid quality of life / useability upgrades.
The reflective glass is the only reason holding me back. You can barely see the parts inside.
A lot of more-expensive cases don't come with fans because if you're spending a bunch on a case (let's say, $300), chances are good you already have specific fans that you want to use, so any fans that were added to the case would just get tossed aside. Even if they're solid Lamborghini-branded fans, the person using the case may be going for Corsair, Noctua, be quiet! or someone else.
Also expensive cases generally aren't paired with air coolers... :D
i just dont see the harm in spending 100$ on a decent iawata air brush...and youtubing how to airbrush/stencil work....and just doing your own DIY paint job....and ofc heat gun/tint wrap the windows etc...on any build/chassis of IDEAL choice. IN regards to form factor air flow aesthetics etc. Its actually quite simple just some scuffing/scotchbrite some water based paint/airbrushing....and some rattle can/gloss clear coat...which you can also layer up/a lil wet....then polish....and add a second coat/polish for a clean look.....which can equally be re sanded/painted if need be for a refreshed look. IDK i come from a 1st wave FULL OUT SLI/custom pc YT influence....as where i learned about PC's and have only seen "things" evolve since then. Dudes that would get things cusom painted/powder coated/annodizded aluminum etc. Even painted watercooling parts. VS the age were still somehow in or now in 2024...the RGB on its last leg...what else can i waste $$$ on vs skill aesthetics.
@@anhiirr If you have the tools, the talent, the patience, and the time, sure, you can do something as good as this if not better. A lot of people don't have at least some of that. A lot of people I know are missing at least two of the four I mentioned, so buying a case like this is the way to go if this is what they want.
@@MindstabThrull The way i see it as a hobby/passion "GAMING" building a pc or an expensive build already takes time/ingenuity career etc Life spent to earn such a build....that a little more "know how" TO REALLY understand what youre getting into goes a long way. VS ppl that genuinely get involved with this kind of stuff for the HEY LOOK AT ME factor...the way im saying it is that PURE/MOTIVATION to have a PC and hey look at me POINTS largely come in part to proving the know how/knowledge work and proving how my you were willing to execute to your highest "desires" in a build. The aesthetics mean nothing if these pcs have bad temps sustained clocks...multi run benchmark score drop off....poor 12v rail performance on their psu hot psus....generally a PC that will encounter large Voltage/degredation. It completely misses the point of Building/custom building acquiring the tech/budget range for an ideal build. ESP if it only PURELY looks the part....IJS if youre willing to save/invest towards something thats going to be special to you or if you REALLY want it to be considered "SPECIAL" it would require the time it takes to teach yourself how to do these things or to actually have a 1 of 1 build. It just shapes you differently as an owner/enthusiast. VS just trying to buy your way to a status....that pcs/gaming/gaming industry cant really equate the yields of in regards to "RETURNS".
13:00 I actually kind of love how it looks with half of the side panels off, open to the air
All of the sample cases sent out are numbered 0000.
I'm happy with my original Evo, but I did pre-order one. I used to work for a Lamborghini dealer, and offered to build a showcase for their receptionist's workstation
Where did you order from
@@kamronkelley1083 I pre-ordered it on Newegg
did you get some of that receptionist poonany?
I actually think that this display cable is smart because it seems there are many USBs on the back and only one or two headers inside on newer boards and those are usually occupied by fan controllers, AIOs and such.
sooo, the onboard screen is directly in front of the exit of the CPU cooler instead of a exhaust fan .... that will be wonderful for the thermals and longevity of the screen ... not :3
I think 0000-number cases are just for reviewers because every reviewer gets a 0000 number. It's a good strategy to avoid reviewers reselling limited edition cases.
0000 is demo units that are not for sale, there will be a few 0000's that wont count towards the limited number.
Jayztwocents had a 0000 too so i guess 0000 is only for Marketing
for case review, i think air flow visualization is a must.
Agreed this case is the best O11 that lian li had made this one and the evo such sweet cases
The front glass popped out the exact same second a RUclips. Oh, the cliff hanger 😂
i bet if ferrari made a pc case they'd go out of their way to sue anyone that modified the case 🤣🤣
needs a transfer/payment fee to sell to another end user.
They'd force you to buy a cheaper case, so you can buy their top model cases.
Isn't that what would Nintendo would do?
That catch deserves a like and a comment. Wow!
Let's be real. If they did this colab with mitsubishi instead it'd be 1000 times cooler. O11D LAN EVO RGB WRC
unfortunately the evo is dead, so it'd probably be a small crossover instead that they'd base it on
Let's be real, Mitsubishi might go bankrupt by the time everyone buys all of the cases.
@@RadialSeeker113do you even know how big Mitsubishi? 🤷♂️ the group account’s for 10% of Japan’s GDP
@@RadialSeeker113bruh, dumbest thing you could say, makes me realize how little you know the company, it's one of the biggest holding groups in the world.
Just so you know, they don't only make cars, if anything, car marketing for them is just a tiny percentage of their whole operations
Also stocks have rapidly grown in the past five years, lol
That's like how many years ago when Mitubishi went WRC???
This case with the asrock oc formula motherboard would look amazing
Impressive design on the O11D Evo RGB. The features make it worth the buy despite being overpriced.
I can definitely see them making more than the specified number.
Lamborghini has already made extra of special editions* before.
Editions?
@@thomasphillips885 yes. Auto correct got me.
No. That’s not how any of this works. That “X out of X” is a predetermined number. They do not exceed that many units unless it’s for a specific specific (intentional) reason. Lamborghini always did one off cars. Not sure what special editions are you referring to.
@@Iridiumcosmos I'm referring to multiple vehicles from Lamborghini, Ferrari, and other manufacturers having having duplicated numbers.
"X of Y" is marketing not legal.
@@PheonixRise666 What? Can you provide an example of this?
I am the first one here for a colab that didn’t need to happen and I’m thrilled.
The monitor has to be plugged regardless into your motherboard or GPU, otherwise, you know, no screen signal.
This is clearly a classic O11 with some minor adjustments, but they are using the same process, the same modeling.
So asking them to revolutionize the whole case structure just to hide a cable on the back of your pc is probably not the smartest thing.
You could argue they could since it's a limited case, but it's even less cost effective especially cause it's limited units
Honeycomb mesh is a VWAG thing on their sports cars, which is the parent company that owns Lamborghini @ 6:12
I would love to see a Kimera case, the old lancias had an awesome design and I would like to see what would people do to adapt it to a case
Well now I HAVE to "upgrade" my O11D Evo for this one to match my Lambo Secretlab chair.
It actually only takes seconds to make a mirrored glass panel that looks even better than that, VViViD makes window privacy film and it is only 15USD for 30"/76cm X 6.5'/198cm.
I tried that mod, but getting it actually free of dust particles and cut to size perfectly is way harder then it looks.. Wasted quite a few rolls and gave up in the end.
Literally 1 or 2 dust specs that get trapped every. single. time.
This is classic like you did i think it was the NBA merch, Lamborghini loves to just put a logo on something and charge crazy money for it with almost nothing added usually
I don't get why the screen is there, nobody is looking at the back of the case especially if you have air cooler. You'll pay 140$ for screen that is barely visible and some vinyl stickers on the case.
ppl that dont know what Riva tuner is or Afterburner. Think theyre going to install 2-4k worth of hardware in this....and run some 3dmark...to ladder climb an air build in a 011 XL XD....and wants to look at their chassis for "temps" so they can max out their v core and voltage CURVE to sustain highest CLOCKS possible....CLEARLY the demographic spending on something like this....Definitely not ppl penny pinching their builds to OC their gpus to Punch a whole SKU higher....XD ive seen ppl with 300$ cpus....and more invested in LIAN Li fans in their 011 builds....i cant act like this chassis isnt more often with builds poorly executed than proper ones NGL.
Those HDDs do in fact need air, and only get it if you mount the side fans on the inner side of the case as opposed to back side. They also need to be at a decent RPM. I have the O11 XL with 4 HDDs and found that HDD temps approach 60C if you don't do it that way.
not to mention how a poorly optmized HDD orientation also adds to chassis heat...if a lower quality psu/heat setup is also soaking up....talking huge degredation on PSU within first few years of use...considering the voltage ranges these days on newer DDR5 systems and modern 3ghz gpus. Looking at huge HITS to SOC and system voltage within lifetime of ownership and occasional "declocking" and loss of sustained "as advertised" all core potential as well...within 1 year of heavy use. Sad state of affairs how much responsibility goes into the hands of an end user or larger budget/use range BUILD these days...yet a properly tuned modern/ai equipped laptop can do a slew of workloads that the majority of "older" gen cpu/chipsets etc can achieve. Still blows my mind that for the most part these 1st gen AI setups are mostly inclined to managing these voltage "issues" on flagship/end users builds....so that "modern" ultrabook/etc professionals dont see these voltage creeps and spikes as cpus go from dormant/low load to fully loaded/clocked in the span of seconds if not fractions. Its almost a tell that Intel/amd are fully aware of how much OS/coding hops into causing so much idle voltage and spikes/resistance heat at the snap/drop of a hat with these modern 2-300w cpus on a desktop system. Or the heat soak for these cpu/blocks for air/AIO and how they fare with high/load uptimes.
Man great catch!!
I had my Lian-Li O11 Air RGB'd out. Ended up being sick of it and now I'm blacked out.
I was looking forward to this one once I saw the Lian-Li announcement!
I just saw it on a tech part site this morning. It costs way too much
got one on route to me now but would admit i would prefer to change the screen to a custom screen like afterburner on it (just so i can have gpu and cpu temps at the same time) rather than the lamborghini stuff but it can switch between the two so i'll just have to deal with it.
also going to have to get a few more fans as my current setup only uses 5 fans at most i think 2 sets of basic p28 lian li uni fans should do as i want a slightly more blacked out version.
That is so strange. JayzTwoCents has made a video yesterday about this exact same case! Im wondering if all the press release cases are numbered 0000 of 6498! His has the exact same product numer! Just check his video at 2:14 I believe and it shows! You would think they would say something about that to avoid confusion! I have to say though Lian Li has always seemed to go above and beyond as far as im concerned so I'm absolutely sure there is a very good reason for the discrepancy!
Jayz2cents has the same number case
"'cause I'm Lian-Li, I'm dynamite.... 🎶🎶🎸🎸" sorry, couldn't help myself 🙂
ok the part at 0:13 went hard
"oh, ihave a custom Lambo at home, this is just my car"
The lambo:
16:04 i'd just put it ontop of the pc in a horizontal phone stand or something (i think it'd look cooler on the case rather than inside it)
One reason it’s so much more is because the carbon fiber isn’t cheap when it’s real
It took Lian-Li a few months to get a digital signature for L-Connect 3. Windows Defender kept picking it up as malware. Does the software for this screen have a digital sig to prevent that from happening?? And at $299 that better be real carbon fiber everywhere!!
If it were me I would mod the screen on top of the air cooler and make it highlighted better
Having to undo everything because the Evo line doesn't have a backplate cutout ? Been there, I feel your pain
The colab we didn't know we needed.
Mother of God that is Beautiful.
Using the little plastic box at 9:27 as a pill organizer
Should you do 120 or 140 on the fans?
The carbon accents would be so much cooler if there wasn't any Lambo Branding
that shirt must have a out of pocket world record
I’ve been looking into this for a couple of days now unfortunately it’s not listed anywhere in Canada
I wish you could put anything on the internal screen.
Should have came with fans all around.
Mirror finish is meh.
Edit:
12:00 "can I get a woo?"
Awooof.
The chromed glass is the coolest thing, but not worth buying a whole new case for it
You're paying for a limited edition with a lot of extra design work. The additional price is not that much.
at 9:03, there is a butterfly at the bottom left corner
BOLD of lian li to use corsairs paint scheme 😂 even if its tagged with Lamborghini, all im seeing is a 011 in corsair colors with a few lambo badges 🤣
Except corsair copies them 🤷
I want a carbon fiber case so bad.
As you put the gpu in there I thought for a second hmmm mabye I missed it when he put a aio on there... 😂
More from Adam please 🙏
Lian Li has made great cases for decades... it's the only case I'll buy when building PCs for close to 25ish years.
Someone get this man more atx cases to work on. I mean, 80% of this is just a review of the evo case in itself. They prolly picked Adam to do it to make it sound that more interesting. Alex and Jake would be a whole lot less impressed I would think.
Here in my garage, uh just bought this new Lamborghini here.
It's 300 on Newegg and already out of stock
A case at that price point should NOT have fans included because it should assume that you're a nerd enough to have your favourite fan (noctua). I hate all the cases that include fans - they all go straight to the landfill.
Um… $10 in window tint and I can mostly get the same result, and I don’t have to sweat an expensive limited edition case
He literally brings that up at 17:00
theres 3 big reviewers with the same case number i feel like their demo models i own one and its number 2091 out of 6498
Come on, they'll make a BtF/Stealth/Zero/Whatever variant of basically this case at some point.
They'll have to change a few more things, might call it a new series, but it'll generally be this.
And i think i want it.
Not the Lambo edition, no thanks. Also, no fan in the back, bad choice. The screen there, why ?
I am also just waiting for an AIO that basically has a screen on top that covers all up to the memory and the GPU.
Gotta happen at some point.
I am sticking to aircooling though. Cheaper, can look good, less prone to failure, less massive failure, cheaper and really fast to fix, if you really want a screen on it, those exist too.
And yup, the pricing is ridiculous.
9:07 anyone else see the way he grabbed the motherboard and bent the ram!
6500... Jay also got a case numbered 0000 lmao
Beautiful, but it would have been better to have liquid cooling so you could see the screen
12:45 CoolShirts spotted‼️‼️
Why did I fear this, I thought this would be like the Lambo mouse
Should you not have an exhaust fan over the lcd screen in the back side? Does one even fit there?
That extra 1c cooling isn’t going to be missed.
adam looking great
Wow a case inspired by the Urus
I mean, this case is pretty silly regardless of how you look at it, but sticking an air cooler into this case is just dumb. It's specifically designed for 360mm radiators, and the fan layout really doesn't make sense otherwise.
missed opportunity, should have had lambo hinge case doors
Oh god that case is so LAME! With a colab with a company like Lamborghini I would at least expect a wicked custom case with sharp edges and sick lights just like a real Lambo. This is just another ordinary stupid box case. Literally nothing to do with Lamborghini. L case.
Missed oportunity for the lamborghini branded rtx4090 😉😅
I laughed at 0:13
Is it easy to remove that Lamborghini logo from the front? It spoils the look of the case.
The logo should have been etched into the glass; visible but almost invisible.
Due to the reflection I noticed the unsolved Rubik's cube at 17:27... And it bothers me! It bothers me a lot! IT'S Not solved!
Who else sees the Hand of the King as says. Hmm..."That looks like Adam"?
My only question is where can one get the skeleton pockets shirt?
For anyone interested, the Sahara Gaming P480 is this case but for £49.99. Save your money, You dont need a screen on the back, nor reflective glass.
"it's the same case" except it's not. Not even remotely the same quality as an actual Lian Li case. Cheap thin steel instead of aluminium on the outside. Thinner glass. List goes on. Stop recommending cheap, second rate knock offs.
Yeah, big fan of the Toys-R-Us aesthetic.
I bet he gets a kickback from aliexpress
People who want a Lamborghini case will pay the $140 Lambo Tax just for the badge on the front and the ability to day "I've got a Lambo"
Or maybe they’ll buy it because it looks nice?
Ric Flair: Wooooooo!
The screen was definitely afterthought
My guess? People who actually buy Lambo's are not building their own PC. So, the $140 markup does not make sense. Just get the OE.