DIY- Colloidal Silver Machine
HTML-код
- Опубликовано: 3 окт 2024
- Danny takes you step by step on how he makes a colloidal silver machine for our DIY colloidal silver. Also check out our DIY Colloidal Silver video on how to make CS. • Video
~-~~-~~~-~~-~
Please watch: "SPRING Into Action"
• SPRING Into Action
~-~~-~~~-~~-~
I've been into making CS for about a month now. Colloidal Silver works. 1 friend took care of her toddler's ear infection. I cleared up a red, inflamed, swollen and sore bacterial infection overnight. I dobbed CS into the infection site with a Qtip for a few minutes twice that nite. I woke up with a dry, healing wound. ALL signs of infection were gone overnight.
May I ask what type of generator you use or did you make your own device?
It's awesome on toothaches!!;
Agree, Best, Simplest, clearly explained "easy breezy DIY for Silver" that I've seen so far, thank you so much Danny!!!
I think it's so nice how he really REALLY shows how to do it, with the zip ties etc.Very simple :)
THE BEST, SIMPLEST, WELL EXPLAINED DIY FOR SILVER. YOU GOT IT GOING ON, SIR! THANKS MUCH xo
Best instructional video ever
Awesome instructions! I wanted to do this a long time ago and it got put on the back burner with everything we have going on. After watching this definitely making it a priority! Thank you 😀
Thanks 👍 alot this is way the simplest I have see with good instructions and easy to follow, I needed a DIY, cause the generator is way too expensive. Thanks 👍
You made it so simple, even I understood. TY!
Thank you for sharing how you make your system. My family appreciates it.
+Katie Grazier Glad to be a blessing to you.
Thank you for your generosity! I liked, shared, and subscribed!
I clip right onto the straight end without any bend. I've been using it for months & it's working great. I've used a variety of things for the top including a coffee filter with the wires poked through being supported by chopsticks. Now I have a heavy duty paper plate with the wires poked through. That's working just fine until I do something more permanent. I'm using a ProKeeper powdered sugar container & have The wires kitty corner so that the furthest apart which makes the smallest particles, which gets into our cells better as I understand it. ☮️🙏🏼
Hi it's Theresa I just watched your last video Friday night chat and couldn't leave you a message so I went back one video and here's my reply I absolutely feel the same way about you I get up every morning I say prayer for you two, I really consider you as family, God bless you both. I just love to see Danny smile when he speaks of Wanda!
+Theresa Jukiewicz Thanks, I love to see that smile too, Wanda Thanks for the prayers, we know that they are being answered
Hi Danny and Wanda, i do the same with 4 9volt batteries, as long as the ppm is 70 or above you are good to go I have been told :) Glad to see you are home, one word of warning Danny, keep your shoulders moving as much as comfortable possible, the last thing you want is an air pocket under your shoulder blade, they never warned me and I thought I would Die. The wordt pain I was ever in , and I had 4 natural childbirths lol.
+Cam1922 Thanks, he is moving but you are right about the gas pockets in the shoulder area. That is the main pain he has. I have made CS with 9 volt batteries too. (BTW I had 3 homebirths! ) Wanda
This is an excellent explanation and most probably the best I've come across. I still have a couple of questions:
1. Does it really matter which wire is the tracer wire as they will be connected to the silver rods anyway, doesn't matter which one.
2. At that voltage how many hours for each PPM of colloidal silver.
for Example run 500ml of distilled water for 6 hours for 30PPM colloidal Silver etc. If anyone else has used this setup and can answer, much appreciated!
Some guy i read said its best to use 30v 1amp for 9 hours ,its breaks to smallest particles
hubby G ordered the silver rods a few days ago after watching Wanda's collaboration video. Thanks for the step by step how to! blessings to you both. LeXze and Hubby G
+africaboundgirl Thought we needed to show you how as soon as possible. Thanks for watching.
+africaboundgirl LOVED my letter today. You are so creative! Thanks I like getting mail.
TY! I was hoping it would bless you both! Praying for abundance at the deep south homestead this year. Blessings, LeXze and Hubby G
Thanks. Watch next week.
Mann Ranch Homestead /africaboundgirl what size of silver rods? 18 gauge? Sterling silver? Can you be more specific? Thank you!
Thank you for your generosity! I liked, shared, and subscribed!
Thank you for your generosity! I liked, shared, and subscribed!
It just takes a bit longer time when it's under 27 volts. The newer generators I've seen are 32 volts. Thanks for sharing your information! ☮️🙏🏼
Perfect Timing! After vewing Wanda's video and The Road To The Farm also, I had a slew of questions despite researching every link I could find for hours. But no need now - thank you so much. I have ordered my rods. Hope you are and continue to feel better!
+keepercreek I have put a few links on info in the description box. Thanks we wanted others to know how simple it is to make CS
To buy one costs $245.00!! So greatfull you shared the making and using of yours in such depth!
You are welcome. We wanted to show how to save money and still have a product that works. Been doing this for nearly 20 years. Thanks Wanda
Brother just take 3 9volt batteries=(27v) and run them in series clip to the open posts +/- clip others to silver rods,etc. and put in jar of Distilled water and wala :). You did it ;).
D I water will not work
SmalltimR link is broken :(
pearler uanir how long duration?
@@tommyconrad5628 D.I. water is de-ionized, its beyond distilled. distilled is good because it's clean, but needs a little pinch of salt as an electrolyte for the process to start.
@@modelnutty6503 if you like silverchloride it does yes ;)
Thank you for these really clear and simple instructions. Appreciated.
Yes!
This is good, but how long do you have to let it sit before it's good to use?
Thanks for the video. It's important to be self reliant these days! I use a 1 amp 36 volt DC power supply I bought for a buck at the amazon returns clearance sale, cut off the output end attached alligator clips after separating the wires. I bought 10 gauge silver rods on Amazon. They have a larger surface area. A plastic lid from a mixed nut container, drilled two holes 1-1/2" apart, hot melt glued two rubber grommets over the holes to support the rods better, glued a small block of wood to the lid between the holes for a handle. I use a 1 quart pickle jar which I boiled in salt water to get rid of the residue from the pickles (very important). Only use distilled water! I bought a TDS meter for 11 bucks. To check water for purity and to check PPM. I am able to get 17 to 20 PPM in about an hour & a half. I filter the result through a paper coffee filter clipped to a funnel and store it in re-purposed brown glass beer bottles. I suggest buying a bottle brush (available on Amazon) as the bottles need scrubbing after a couple uses due to residue. A kitchen timer with a loud bell is great to have because it's easy to forget and you wind up with some really murky looking stuff you might not want to ingest. Amazon also sells silicone rubber bottle caps that work great to seal the bottles.
The TDS meter is NOT a good test, nor is a Lazer light like people use to play with their cats. A metallic taste is the best/only way to know unless you want to spend about $5,000-, Yes $5, 000- for a used piece of equipment. 10ppm is all that is necessary. Filtering it is a waste. It's best stored in bottles like Coca-Cola comes in. I use my seltzer water bottles. Juice bottles are also good. Water bottles & other plastics are not good for its storage.
@@goodintentions1302 @Arpad
Bob Beck says dark brown and dark liquor bottles best for storing Coloidal Silver and you can use Salt & Dry beans to clean the bottles
So now I get to find and look through all of the save phone and other charging cords . . . and finally use one of them . . . I'm thinking 15 to 20 yrs of saving these I will finally use one . . .
Thank You- you inspired me to “Just Get It Done !!! ) I’ve owned the simple setup for months…. - not your setup…- I am now looking through my tech Plugs to do it your way )
Yes! You just made it all sooo much easier. Thank you again!!!!!!!!!!!!!!
+rabdhan You are welcome. We believe in easy ways to do things. Why make it complicated. Thanks
You could just drill 2 holes in lid. Bend rods a little to keep them from falling through the top of lid.
no the rods cant touch anything or they spark.. wake up
@@CooeeChris1 if they rotate in this video setup, the clips could touch.
THANK YOU! I always keep colloidial silver on hand..for myself and pets...way cheaper this way.
This is a very simple machine to make thank you for your tutorial. It would be very useful to show the timing and how you use it though , that is lacking here .
I use a 3V dc transformer. Slower but the low voltage makes smaller nano particles which is needed to penetrate the cell walls. Very important!
i use 1.5 volts. i also tried with 0.5 volts too!! the electrodes are spaced 1 millimetre apart.
all those idiots using 27 volts and then put current limiting resistors in series...which absorb the extra voltage...you can the video in my channel...
I read that the wires should be as far apart as possible for small particles. And so the clips won’t touch if jostled.
@@esecallumHow long does it take to brew 32 oz with at 1.5 Volt
@@nejolo9563 use the current volume time spread sheet you can download from the internet. Also it's current not voltage.
I've made colloidal silver with 12 volts... no problem...works fine
Thanks for the tutorial, well done. Hope you are feeling better!
+moblackbird Slowly getting there. Thanks
3 9 volt batteries work if you hook them together in series and that'll give you 27 volts & that works perfect & it's cheaper
The down side is that you don't exactly know when they are dieing other than it takes longer to make it.
I use a convert like that but it is only 12 volts and it works GREAT just take a little longer ! Do not make a big deal about the polarity just hook the wires to your silver bars one on each about 3/4 of a inch apart !
I was wondering about that! Why the detail given to the polarity when both rods will be submerged at the same time? Thank you for clarifying this.
I have been killing my brain tumor with colloidal silver, nutritional ketosis, a few other things
It's a good thing I have a head start with my masters degree in physics, those peer reviewed journal articles can be a doozy!
I would like to hook up a current regulator to control my particle size, a project for another day
@Debbie Gerard 🌺🌺🌺
@Debbie Gerard 🌺🌺🌺
I'm new to this, just got my kit. I've been paying a fortune for 500 ppm and I would like to brew it, I think the home kit I have is 5-10 ppm. I hope it's not a waste
you can build a 27 VDC unit by using a more powerful transformer and use a power resistor preferably an adjustable one. An old-school Rheostat can serve. You'll need a decent multimeter and that's all you need.
A warning for your fans:
Some folks might think Glass is a good alternative to plastic. If they were thinking Laboratory glass then yes, if they were thinking pyrex and mason jars then it's a little more complicated because only lab-grade glassware is certified to have no trace metals in it. Any other glassware is a crapshoot.
Thank you. Can you show a picture of your colloidal silver suspension made from this?
Very well explained Video, thank you very much. Best wishes and greetings from Frankonia/Germany. 🙏❤️👍
Great, easy to understand video. Thank you.
I need one of these!!!! ❤️
SilverSol is what cured my mrsa
Great video, I use 3 - 9 volt batteries on my CS generator also does a good job
Nicely demonstrated, thank you! I've been going through cabinets/drawers/sheds cleaning out excess and came across a converter, no idea where it came from, but I'll have to see if it'll work for this!
Excellent, well explained video. Thank you!
Take 3 9volt radio batteries and connect them like Lego's ...You will end up with a negative and positive pole..Connect jumperwires and clips to your rods...Been doing it like this for years...
How long the batteries last? (how many times we can re use them? ) thank you for the reply
@@justinc2625 5 or 6 times... CHEAP but effective medicine...
You could buy an AC > DC transformer for nearly the cost of a few 9V batteries and have unlimited cheap power.
thank you so much, I was hoping you would put out a video with this information!
+Carin Baker You are welcome. Thought it was needed. Thanks
+Deep South Homestead hope you're doing better now too
slowly, but better. Thanks
Hi Danny, i couldn't find the link to the silver. Could you post it again please?
Thanks!
Thank you so much for this video
Thank you🥈
Great project. I spent $60+ on a little machine that essentially does the same thing you made.
+Off Grid Nation Yes, they are out there. Can you put a link on here for the one you use. I would like to mention you and your machine in the description box. Thanks Wanda
@@DeepSouthHomestead - I watched another channel a few days ago that had a link for a CS generator off Amazon but it's sold out already! It had a bubbler and a water purity sensor. I think if I'd been able to get that my hubby would have trusted it, but I'm afraid he will not go for this DIY model. It took me FOREVER to convince him to try CS to begin with. (He's very much a worshiper at the church of the white coat. 😕 Whereas I don't trust white coats any further than I can throw 'em!)
You need an agitator also. A fish Tank Bubbler works well to keep the water mixing during the process.
Yes I was wondering about that too -actually I was wondering if the plastic tubing would contaminate the collloidal silver? How do you tell you aren’t getting weird plastic stuff in there?
Hello. Thanks for this great video. This charger is how many amp?
Should I be concerned about the amperage of the power supply. I’ve read somewhere it should be less than 15 milli amperage. The smallest I’ve found is 500 milliamp. Another one I found says 0.25 amp which I’m assuming is 250 milliamp. But here you are using 1 amp which is equivalent to 1000 milliamp and thus higher. Should I be concerned with Amperage.
Should I be concerned about the amperage of the power supply. I’ve read somewhere it should be less than 15 milli amperage. The smallest I’ve found is 500 milliamp. Another one I found says 0.25 amp which I’m assuming is 250 milliamp. But here you are using 1 amp which is equivalent to 1000 milliamp and thus higher. Should I be concerned with Amperage.
Good info. Hope you are feeling better each & every day.
+Danny Fox Slowly, my friend, slowly. Thanks
+Deep South Homestead thank you for all you do appreciate it
The pleasure really is ours
great info - we be trying this soon!
+nms886 Thanks, hope it makes things easy for others to do.
Can you use a pure silver coin instead of silver rods? I ran out and need it now. Also, can you use a 6V lantern battery instead of (3) 9 volts? Should it fizz or something as it is "brewing"?
What were your results with clubs instead of rods?
Very good video and well explained
Very well done tutorial !
+ChickenCoop Art Thanks, Danny explains things pretty good, doesn't he..
Hey man thank you for the video quick question where can I get the colloidal silver rods from? I would appreciate it
Miguel Bello ....simply google or ebay/amazon "colloidal silver generator"
this is not a good way to make C.S.
look for one which has "polarity switching" and some form of stirrer.
the best type will also step down the voltage as the solution becomes more saturated with particles (which affects conductivity of the water)
correctly made product is fantastic but cheaply made without much knowledge is just poor at best and toxic at worst
silver rods come in different gauges (thickness) there is no "universal"....learn.
MUST be 0.9999 pure (advertised as .9999)
available easily on ebay etc
ONLY USE DISTILLED WATER.... nothing else...not even in an emergency.
the minerals in water affect the electrolysis process.
distilled water has no minerals.
cant stopthemusic thank you.. also another question I bought a 5 stage filtration that’s called zero water it basically makes distilled water it makes it 000 ppm is it okay to use it? It cleanse the water from all solids
@@miguelbello9686 gallon of distilled water is less than 2.00 at supermarket. Check baby products area or bottled water.
@@miguelbello9686 SHOULD be. As long as it specifies its able to make zero ppm distilled equivalent to distilled water and you test it every time.
I've tested niagra distilled from 99 cent store and it's 0ppm for a gallon.
So... Depending on how much you spent on that system and how many gains it makes before you have to change the filters.... Well, you do the math.
Great info! Thank you!
Thank you- excellent tutorial
Cool, really like that!
Thanknyou!!! Very informative. Buying thisvstuffbis very expensive. You have xut out the ezoense.
Can a person use a battery tender, like one you would put on motor bike over winter.
Great Video, thank you.
I am totally new to this but from what I have been able to get so far is that this is ionic silver and then it has to be convert it into true colloidal silver. Am I totally missing it?
If this is dc current, isn’t there electrolysis of the water happening?
what about bubbleing air as in the water to help mix the mixture like the store bought colliodal machine has ??
Can’t find a power cord like you show, only new type with one wire.
How much liquid do you use?
How long do you leave it on per 500ml?
Do you use a Parts.Per.Million. tester?
Basically if you start off with distilled water should read zero on TDS meter after 10 min's take a reading probaly around 2/3 ppm in an average glass water , go longer for stronger .If you look at the rod's when inserted into the water after maybe 1 min you see it working on one of the silver rod's like a plume or vapor of smoke, make sure after 10/15 min using you wipe down rod's with green plastic scouring pad swap them around, & give the glass quick stir with something non metal like a straw, Then continue or else if not wipe regular will slow down process !
@@teebee6689 ok Thanks!
@@teebee6689 it was said tat the test meter only measures electrical current not the actual content
@@teebee6689 okay thankyou . I also saw the use of coffee filter papers to take out any large particles or clumps . Thanks again
@@fmtvarse I've tested both ways and it seems to read the same whether power was on or not
Thankyou.
Hello, what colour after you get? My is first like white , after 30 minutes is like a purple , i think is wrong something, because should be yellow i think, thank you for advice
Question: Can you use a glass canning jar with a plastic lid for this project?
Yes, this is a pint canning jar and a plastic lid that fits it.
I found a perfect one at my local dollar general
Thanks so much for the video. Where did you buy the silver rods and how big are they?
Thank you
Informative
If I put a 1 oz silver coin in water will that give me the benefits of coloidsl silver?
You say the machine is advised to have 27 volts, however it is the amperage plus the voltage which is most important.
you didn't mention where you get the silver rods. You went thru the process of making the machine and told where to get everything except those two silver rods. Thanks
exactly! that's what i was searching the comments for!
Great! Thank you so much.
Thanks for a great tutorial. I watched you other video where you made the CS water and was wondering how long do the rods last and do you clean them off between uses?
+Deb G I ordered 12 sets of rods about 15 years ago and a couple of years later I ordered a 3 oz coil of wire from Hauser and Miller, link in description box above. I am still using those rods. I clean them with a green pad that came with the sets of rods. Thanks
How long do you run it? I bought one that looks like this but lost the instructions of how long to run it. I do have the red light to see flash through it.
how many watts is the transformer, and how long do you leave it on for ,what is the daily dosage,how to use it .also cover jar with a sock or use a brown jar to keep out uv light so your silver rods last much longer, also clean rods between uses, and how to store
Thanks for the info. I wanted to see a close up of the lid. This was even better. My ? Is grid goes down for long period and you need more can you make using a battery if so what size. Thanks Cheryl. God Bless
9 volt batteries are what you need. I keep a few around just to make silver. Thanks
I use 3 9 volt batteries run in series . What that means is you plug one battery post into one battery . You plug the third battery into the #1 battery . Know you have three 9volt batteries run in series which gives you 3x9 = 27 volts ;). Now clip the positive and negative remaining two post and clip to silver rods . Put in Distilled water and your good to go . I have a PPM meter . Which helps as ,temperature ,humidity ,storm activity seem to change the time to make . I make enough at one sitting to do the year . Of late I have passed some to friends who could not afford the sickheal medicine of today . It seems to be spreading .Shoot,I give it to my steer calf .
Thank you! 👍💪🙏❤️
That is awesome Danny :)
+Living Weird Thanks, just wanted others to know how to make their own CS.
Danny, thank you for your excellent demonstration. I think I could build this. Where do you learn how to USE the colloidal silver? Is there a reference manual? I pray your surgery was successful and your pain is relieved. A blessed Easter season!
+Barbara Rote I put several links in the description box. They will explain many things about silver. I tried to list a variety of sources. Hope this helps. The pain is getting much better, Thanks
How often to you change your silver rods?
I'm kind of confused. I had thought you said the wire with the white boxes was the common wire, why is it connected to the 'hot' alligator clip?
Thanks for the video. Is this a project that you could make and sell to others at a reasonable price? Seems to me people would purchase them and it would help support your homestead.
+Workin On It We are keeping all ideas open at this time.Thanks
What guage silver rods please? Thank you!!
3 years back I startedmaking the silver claddagh ain't had a flu in 3 years and just a while back I had an ear infection put three drops i in my ear woke up the next morning and going. Told about eight or nine of my friends about this and they make it to now. Not tell nobody to do it look it up do the research it's on there
You don't need much, and depending on what you're treating, like say, a cough, a nebulizer and CS knocks that down immediately using almost nothing, a few minutes of vapor.
Great video interesting!
+Annie Farmer Thanks
Hi sir, thanks so much, but I am still a little confused, as how to convert the black box to 24 volts and how to put those pink things on and why, I just can't seem to grasp it?? The rest is easy, I can do it.....thank you Gwen
What gauge wires are you using? How long do you let it brew until you unplug? How long does it last and do you water your dose down or drink a full glass?
I don't know about gauge, but it depends on the machine. You can even see the expensive ones have colored lights and the water looks like it's boiling. These folks are just trying to share the wealth of their knowledge of something that can potentially be pricy. I'd do my own, first. You should make sure you have a good experience with it. DIY is really the best way to achieve that.
3 volts to 9 volts is fine.. .. dont need anything higher. current makes cs not voltage.
Would not buy over the counter I make my own and have even improved on the best process my researching uncover. I use strong magnets placed next to silver rod on outside of containers to eliminate the dross and need to filter. This also makes it easier to get a higher ppm in much less time.
Then put it through ūltraslonic cleanér to reduce particle size further and photo and enlarge the ebner effect laser test with my phone to better observe particle size and uniformity...
Add this to your methods and let me kno your results, it drastically improved mine. Ppm on last batch was 165 in little more than an hour
Could you also use 2 car batteries in series instead of that inverter?
Where can you find the silver rods?