Another awesome build dude. Thanx for the distraction, I needed it. As far as the RAM goes i'm gonna have to say capacity, my son runs sooooo much stuff on his pc that he's sitting at 8gb usage just at idle. You never know what the buyer is gonna be running all the time and I really don't think that they're gonna notice a huge difference in performance. You did good by the pc without a doubt. I'm a few hours from you and yeah this heat is getting bad, lol. How're you enjoying the 100% humidity? Here's a little tip, buy a 100ft garden soaker hose, run it across the peak of your roof and turn it on for about an hour during the hottest part of the day, usually 3-4pm. Till next time
I agree on the capacity. But I told the person who bought it about it and left the ball in his court. I actually lived here for college when I was younger then moved to NC for work so I was well aware of how bad the weather can be this time of year lol. Does not make it any easier though haha. And I’ll give the garden hose a shot, anything to help keep the house cool
Just found the channel yesterday and bingewatching every episode and love it haha, only just starting to figure out flipping pcs as I've loved building my own the past few years it's been a huge help watching this series !!
Before getting on board with AMD, the peak performance I managed to squeeze out of a decade-old system was an Asus TUF B85 motherboard, Xeon E3-1285L v3, 32gb RAM and an RTX 4060. I recased it in a glass-panel, better airflow case (Endorfy Ventum 200) and replaced the Intel stock cooler with a Silverstone AR10-115XS. It would have been nice to get more TUF components... maybe in the next build. Thanks for the inspirational content.
Those TeamGroup SSDs absolutely COOK when under load as the LEDs generate heat. Remember seeing a GN video about it when they came out. The heat can cause them to die early. Great video! Looking to start flipping systems in my area as well, and your videos are very inspiring!
Hey there, I've seen a few of your videos now, I enjoy the concept but i think the pacing is terribly slow. I find myself fast forwarding even on 2x speed. Cutting back a bit on the B roll and speeding up the footage of the cleaning and rebuilding process should help keep viewers interested. Without any used parts hunting included, id expect the video to be around the 15 minute mark, a single pc cleaned and built up again. Best of luck
What's your listing practices? Your PC's seem to sell fast, but seeing what you name your listings and what you put in your descriptions would be nice. Also, would you be able to do a test on a fresh marketplace profile? I want to see how hard / easy it is to continue to get sales with your same listing practices on a new account. I'm fairly new to the journey and made my first PC sale recently, but it's been very slow and I'm not sure if it is just my area. I feel like my prices are fair, the listing and photos are great and I stand out from the rest by running a 3 day advertisement, but things could still be better.
Using TUF thermal paste was a great touch. Concerning the RAM I'd go for the faster pair of sticks every day of the week sacrificing capacity but as you left all slots populated the buyer can decide.
Yeah that was what I was thinking. I just sold it and told the buyer about it and he can make his own decision. Yeah I thought the Tuf paste was a good addition lol
Hey man! Great video as usual. For the Ram I would probably remove the slower and keep the 16 Gigs of 3200. Ram speed does make a difference with these Ryzen Cpus and you can still put the 2666 ones with an Intel build down the line. Better performance in games will most likely mean a much easier sell.
This was pretty dang epic. Only thing I would've done differently is to get the pair of faster RAM to finish it the set all the same speed, but that's just cause I'm a completionist lol But hey! It's already a beast, even with that minor handicap. Amazing as always m'dude
Such a great video today. I have to get on the treadmill and walk (which I freaking hate) but watching your video make it suck so much less. The PC looks like a beast. I think you under cut yourself by about $100. My opinion…you have a lot more experience than I. Also it is only 43 degrees in Michigan so yeah don’t complain about the heat brother..lol. Thank you for what you do and I hope you have a fantastic weekend.
Haha yeah I need to get my butt back on a treadmill. I already had a buyer lined up ;) and I was feeling generous. I prefer the cold lol. I only moved back here for the kids to grow up with there family. I’d still live in NC if it was not for them lol. Even though the pc flipping game is wayyyyyy better here l.
Dang, you're going to make me a Asus fan boy with this build. I can't lie though, I'm the same way with my MSI pc lol... msi this and msi that. Love the build, man!
I always test a pc before cleaning to make sure everything works just in case my cleaning results in the flip pc not working. That pc would have possibly been the exception, that was a dust bunny storage rig. The 2060 is yuck only due to the entire 20 series of Nvidia being forgettable junk and the 1080Ti has far outlasted all of it but yes it is a great card for general gaming, just forgettable. Drop an RX6750xt in that rig and call it a day. Not an ASUS fan (since the Sabertooth 990FX days) or Nvidia (since the 1080Ti) but your dedication to keeping it Tuf is impressive. Higher end flips here take longer to leave the shelve so we would have made almost no profit as it would have sold for £1000 and sat for a month which is valuable storage space. We tend to make double the profit on £500 budget builds all day. Great build and video. Cheers
Great job, PC looks awesome. I’d leave all 32GBs in, but would try to run slower memory at 3200 XMP settings, most likely will be able to, no problem. Might need to add a .1V extra to stabilise. Capacity over speed though if not able to. Having 32GBs at 2666 is still decent.
Brother.. you should create a special website to sell computers for videos. Really, every time I see the computers you make..I wish I had them.. even if I had better ones. They just look so good they make you forget about the rest.
I'm getting a bonus from work and I think I am going to spend it all on PC parts. Around my area there is nothing, no parts or systems, the occasional piece may get posted but it tends to be quite old and way over priced. So I'm going to put that bonus money to work and build a PC and see if I can flip it for a profit, then if I do build another and see if I can do it again. Hopefully by getting stuff into my local market I can help it grow.
awesome build !! love the theming as always :) i'd personally go with capacity over speed, just because it tends to matter a lot more when doing modded gaming/heavy workloads especially also, i wonder if you're using the auto mode on your camera? it seems like the shutter speed is inconsistent - maybe try using manual mode and setting the shutter speed to 1/120 to ensure that the video is at 60fps consistently, and just using auto iso so that the exposure is still correct
Another nice PC build. I would leave the ram the way it is and just let the buyer know they can always take out the slower ram and enable the xmp profile as an option,especially if they are mostly gaming on it.👍
I'm the one messaged you on a video about my mobo being fried somehow between when I turned it off and cleaning and upgrading cpu ram and gpu. And me asking you about brush attachment possibly being the culprit. That is the same board I had
Great build. I know it took a long time to deep clean. I just wouldn't be able to sell it though myself without doing more cable management in the back especially since it had to be so thoroughly disassembled.
wasnt sure what it was being sprayed with till i read the description, i geuss even iso alcohol takes time to dry when lots are applied, some people also use non conductive contact cleaners, or general purpose automotive sprays as long as its non conductive.
Funny thing is my last pic was built in that gt501 case it’s huge ( even tho its classified as a mid tower ) with a x570 64gigs of ram a thermaltake floe aio and a 6950xt
Just had to stop and say u can use some decor for ur wall for a better back drop most of the pc’s are dark an doesn’t pop with the background loving the content as always 😅 would improve video quality maybe
man this looked like one tuff build🤣. I think having more capacity might be better than faster if you wanna be doing other things besides gaming or even during gaming on a second monitor.
Regarding the RAM, I think I'd choose speed over capacity since it does have 16G @3200 or I would have tried to source more of the TUF RAM @3200. There is more than one set for sale on eBay right now. But.... That's why I can't make money flipping computers! 😆
sometimes the ram can bottleneck with all four slots populated, personally since most games dont need more than 8-12gb of ram to run i would choice speed over capacity that said with a Ryzen 9 its possible the system is being used for more than just gaming so the extra ram would make more sense.
Can't you just overclock the ram, make sure it's stable and just selling it specifying the ram is overclocked? I mean, gpu manufacturers does it to their cards? 🤷🏼♂️ I would run the faster ram, take note of all the sub timings and then punch in the ram timings manually on the slower ram and just increase the voltage until it's stable up until 1.45v ig that what it takes. If that doesn't work, maybe use the jedec timings and just increase frequency. But since it's ryzen you have ryzen ram calculator. I love memory tuning myself even though it's really time consuming. I'm using anta777 extreme profile in testmem to check for instability. If that's stable after a few hours in windows I usually do a 24 hour run from a bootable USB. And to really make sure I do play quake champions for a couple of days also. 😅
first off for me at least capacity max it out ! for my gundam cosplays and 3d rendering and photo shoping i need it . gaming is secondary but my system is a beast i think at least . but yea i agree with your upgrades but i would of asked for 1300 lol
Haha the buyer was the brother of somebody I already sold a pc to. So I figured I would just take 1100 and get some decent profit as well as provide a good deal to a future gamer. Win win
@@ThePcRehab no it says t-force brand same as the drives not asus exactly, its tuf gaming alliance certified sub brand but not exactly asus tuf. but it is a tuf prebuilt tho use t-force and coolermaster parts when they dont have something asus branded to go with
Yeah it’s a rollercoaster for sure. Sometimes you make a killing and sometimes you don’t make much at all. Same thing goes for selling the pc. I have sold computers in 30min after posting and I have held on to systems for a month. You are really at the mercy of your market
This is an swsome build and thank you for puttiong your health at risk for cleaning this systm. If the editing System yopu have planned is a give away I'm not goiung to worrty about it becauase not on discord all that often due to getting back to work, So adulting is taking prioraty at the moment. I would love to win a PC/ Build one of my own top the needs I have, I wish everyone luck.
Yo do you wanna collab! I live in india and was thinking we could do a pc building competition 100 dollars in america vs 100 dollars in inda (8500 ish rs) what do you think? Video 5 of asking
4th time i saw you get a facebook / marketplace pc for a price that is "simply unbelievable " its like your ripping off the person or they have very little common sense when selling 2nd hand pc's , surprised you didnt change the pcu a tuf power supply
Please, don't stop making content, even if views are low. I absolutely love your work and it has helped me a lot. Dont give up!
Another awesome build dude. Thanx for the distraction, I needed it. As far as the RAM goes i'm gonna have to say capacity, my son runs sooooo much stuff on his pc that he's sitting at 8gb usage just at idle. You never know what the buyer is gonna be running all the time and I really don't think that they're gonna notice a huge difference in performance. You did good by the pc without a doubt. I'm a few hours from you and yeah this heat is getting bad, lol. How're you enjoying the 100% humidity? Here's a little tip, buy a 100ft garden soaker hose, run it across the peak of your roof and turn it on for about an hour during the hottest part of the day, usually 3-4pm. Till next time
I agree on the capacity. But I told the person who bought it about it and left the ball in his court. I actually lived here for college when I was younger then moved to NC for work so I was well aware of how bad the weather can be this time of year lol. Does not make it any easier though haha. And I’ll give the garden hose a shot, anything to help keep the house cool
Just found the channel yesterday and bingewatching every episode and love it haha, only just starting to figure out flipping pcs as I've loved building my own the past few years it's been a huge help watching this series !!
Welcome to the channel man! Glad the videos are helpful!
Before getting on board with AMD, the peak performance I managed to squeeze out of a decade-old system was an Asus TUF B85 motherboard, Xeon E3-1285L v3, 32gb RAM and an RTX 4060. I recased it in a glass-panel, better airflow case (Endorfy Ventum 200) and replaced the Intel stock cooler with a Silverstone AR10-115XS. It would have been nice to get more TUF components... maybe in the next build. Thanks for the inspirational content.
Those TeamGroup SSDs absolutely COOK when under load as the LEDs generate heat. Remember seeing a GN video about it when they came out. The heat can cause them to die early.
Great video! Looking to start flipping systems in my area as well, and your videos are very inspiring!
Hey there, I've seen a few of your videos now, I enjoy the concept but i think the pacing is terribly slow. I find myself fast forwarding even on 2x speed. Cutting back a bit on the B roll and speeding up the footage of the cleaning and rebuilding process should help keep viewers interested. Without any used parts hunting included, id expect the video to be around the 15 minute mark, a single pc cleaned and built up again. Best of luck
What's your listing practices? Your PC's seem to sell fast, but seeing what you name your listings and what you put in your descriptions would be nice.
Also, would you be able to do a test on a fresh marketplace profile? I want to see how hard / easy it is to continue to get sales with your same listing practices on a new account. I'm fairly new to the journey and made my first PC sale recently, but it's been very slow and I'm not sure if it is just my area. I feel like my prices are fair, the listing and photos are great and I stand out from the rest by running a 3 day advertisement, but things could still be better.
Using TUF thermal paste was a great touch. Concerning the RAM I'd go for the faster pair of sticks every day of the week sacrificing capacity but as you left all slots populated the buyer can decide.
Yeah that was what I was thinking. I just sold it and told the buyer about it and he can make his own decision. Yeah I thought the Tuf paste was a good addition lol
Hey man! Great video as usual. For the Ram I would probably remove the slower and keep the 16 Gigs of 3200. Ram speed does make a difference with these Ryzen Cpus and you can still put the 2666 ones with an Intel build down the line. Better performance in games will most likely mean a much easier sell.
This was pretty dang epic.
Only thing I would've done differently is to get the pair of faster RAM to finish it the set all the same speed, but that's just cause I'm a completionist lol
But hey! It's already a beast, even with that minor handicap.
Amazing as always m'dude
Another great build, i love watching all your videos and seeing your channel grow, can’t wait for the next build!
Thank you so much man! I hope the videos never disappoint
@@ThePcRehab don’t worry they never disappoint, I’m always looking forward to the next episode of the season
Such a great video today. I have to get on the treadmill and walk (which I freaking hate) but watching your video make it suck so much less. The PC looks like a beast. I think you under cut yourself by about $100. My opinion…you have a lot more experience than I. Also it is only 43 degrees in Michigan so yeah don’t complain about the heat brother..lol. Thank you for what you do and I hope you have a fantastic weekend.
Haha yeah I need to get my butt back on a treadmill. I already had a buyer lined up ;) and I was feeling generous. I prefer the cold lol. I only moved back here for the kids to grow up with there family. I’d still live in NC if it was not for them lol. Even though the pc flipping game is wayyyyyy better here l.
Dang, you're going to make me a Asus fan boy with this build. I can't lie though, I'm the same way with my MSI pc lol... msi this and msi that. Love the build, man!
I always test a pc before cleaning to make sure everything works just in case my cleaning results in the flip pc not working. That pc would have possibly been the exception, that was a dust bunny storage rig. The 2060 is yuck only due to the entire 20 series of Nvidia being forgettable junk and the 1080Ti has far outlasted all of it but yes it is a great card for general gaming, just forgettable. Drop an RX6750xt in that rig and call it a day.
Not an ASUS fan (since the Sabertooth 990FX days) or Nvidia (since the 1080Ti) but your dedication to keeping it Tuf is impressive. Higher end flips here take longer to leave the shelve so we would have made almost no profit as it would have sold for £1000 and sat for a month which is valuable storage space. We tend to make double the profit on £500 budget builds all day. Great build and video. Cheers
Great job, PC looks awesome. I’d leave all 32GBs in, but would try to run slower memory at 3200 XMP settings, most likely will be able to, no problem. Might need to add a .1V extra to stabilise. Capacity over speed though if not able to. Having 32GBs at 2666 is still decent.
Brother.. you should create a special website to sell computers for videos. Really, every time I see the computers you make..I wish I had them.. even if I had better ones. They just look so good they make you forget about the rest.
Yeah I am planning on it. Just trying to figure out the shipping aspect of the site right now
I'm getting a bonus from work and I think I am going to spend it all on PC parts. Around my area there is nothing, no parts or systems, the occasional piece may get posted but it tends to be quite old and way over priced. So I'm going to put that bonus money to work and build a PC and see if I can flip it for a profit, then if I do build another and see if I can do it again. Hopefully by getting stuff into my local market I can help it grow.
awesome build !! love the theming as always :) i'd personally go with capacity over speed, just because it tends to matter a lot more when doing modded gaming/heavy workloads especially
also, i wonder if you're using the auto mode on your camera? it seems like the shutter speed is inconsistent - maybe try using manual mode and setting the shutter speed to 1/120 to ensure that the video is at 60fps consistently, and just using auto iso so that the exposure is still correct
Thanks for the tips! I do t know much about cameras so I am learning as I go! I’ll look into it for sure
@@ThePcRehab no worries ! look up the 180 shutter angle (rule), as that's what i'm referencing here
Another nice PC build. I would leave the ram the way it is and just let the buyer know they can always take out the slower ram and enable the xmp profile as an option,especially if they are mostly gaming on it.👍
Yeah that is what I did. I already sold that pc and told him that he could change it if he wanted :)
I'm the one messaged you on a video about my mobo being fried somehow between when I turned it off and cleaning and upgrading cpu ram and gpu. And me asking you about brush attachment possibly being the culprit. That is the same board I had
Yeah I remember bro lol. And that is crazy lol! Well this board survived one heck of a cleaning lol
Another great video I would of loved having that pc love tuf gaming parts thanks for sharing
Great build. I know it took a long time to deep clean. I just wouldn't be able to sell it though myself without doing more cable management in the back especially since it had to be so thoroughly disassembled.
never have I ever thought of giving my PC case a bath 😂 this one needed it for sure though
Rub a dub dub
Always a pleasure watching you sir , your so positive and your gonna be the next tech channel
Thank you my dude!! I appreciate that you enjoy it so much! I do it for y’all!
wasnt sure what it was being sprayed with till i read the description, i geuss even iso alcohol takes time to dry when lots are applied, some people also use non conductive contact cleaners, or general purpose automotive sprays as long as its non conductive.
Funny thing is my last pic was built in that gt501 case it’s huge ( even tho its classified as a mid tower ) with a x570 64gigs of ram a thermaltake floe aio and a 6950xt
Yeah this thing is massive! Still not as big as the grand finale case tho ;)
@@ThePcRehab 👀👀👀👀
Just had to stop and say u can use some decor for ur wall for a better back drop most of the pc’s are dark an doesn’t pop with the background loving the content as always 😅 would improve video quality maybe
keep up the great work man im sure the final pc will turn out great❤❤
I hope so too
Awesome build dude!!!
I'm glad you like it
Noway you got this rig in 400😲
Yes way :)
man this looked like one tuff build🤣. I think having more capacity might be better than faster if you wanna be doing other things besides gaming or even during gaming on a second monitor.
I agree! I left that decision up to the new owner
New sub. Nice content man
Thanks for the sub!
That thing looks TUF!
Not me makin' weird sound when he started hitting the pc 😂, also waiting for him to soak the mobo on the tub 😂
😂😂😂😂😂
I got you
always enjoy your videos
Another top quality video. Keep it up👍
Thank you brother
Liked the build.❤❤❤
Very nice viseo, and very great job 😊!
Thank you very much!
Regarding the RAM, I think I'd choose speed over capacity since it does have 16G @3200 or I would have tried to source more of the TUF RAM @3200. There is more than one set for sale on eBay right now. But.... That's why I can't make money flipping computers! 😆
Haha I thought about it trust me. I figured I’d leave it and let the next owner decided what he wanted to do with it
🙂 nice, if it was for me i would ditch that case and move it over into either an Asus Tuf GT301 or GT501 or GT502
I bet this was custom pre built, and he has changed and upgraded parts over time. although why it doesnt have an nvme m.2 drive is a bit of mystery.
you know a pc is TUF when it has a handle to carry
RIGHT!!!!!
sometimes the ram can bottleneck with all four slots populated, personally since most games dont need more than 8-12gb of ram to run i would choice speed over capacity that said with a Ryzen 9 its possible the system is being used for more than just gaming so the extra ram would make more sense.
what is that you spray on components alcohol ?
Yeah 99% isopropyl alcohol
Capacity for sure, i dont think the speeds will have a dramatic performance issue
I agree, but I told the new owner about it and left the ball in his court
Like the video please Subscribe if you haven't yet
Can't you just overclock the ram, make sure it's stable and just selling it specifying the ram is overclocked? I mean, gpu manufacturers does it to their cards? 🤷🏼♂️
I would run the faster ram, take note of all the sub timings and then punch in the ram timings manually on the slower ram and just increase the voltage until it's stable up until 1.45v ig that what it takes. If that doesn't work, maybe use the jedec timings and just increase frequency. But since it's ryzen you have ryzen ram calculator. I love memory tuning myself even though it's really time consuming.
I'm using anta777 extreme profile in testmem to check for instability. If that's stable after a few hours in windows I usually do a 24 hour run from a bootable USB.
And to really make sure I do play quake champions for a couple of days also. 😅
Hi, are you using Vacuum or Blower on the MB with that thing? :)
It is set to blower. It’s not as powerful as canned air but it does wonders dusting and drying motherboards
@@ThePcRehab Gonna buy one, thats why i ask. Well i guess blowing is bettter.. I really dont want to vacum a piece of socket pins, lol...:)
Haha yeah that would be no fun at all hahaha. I love mine. It gets a lot of use for sure
I guess my GTX 1070 really doesn't go with my Ryzen 5 7500F then... what should I put in it?
4060ti
@@ThePcRehab is a 4060ti really worth it? Cuz its like very low value for money id probably go amd
first off for me at least capacity max it out ! for my gundam cosplays and 3d rendering and photo shoping i need it . gaming is secondary but my system is a beast i think at least . but yea i agree with your upgrades but i would of asked for 1300 lol
Haha the buyer was the brother of somebody I already sold a pc to. So I figured I would just take 1100 and get some decent profit as well as provide a good deal to a future gamer. Win win
Personal i'd run 16gb at 3200, and save the 2666 for another build
kapasitet eller snabbhet jag kör en amd r7 5700g med 32gb 2400mhz det funkar faktist helt ok det är endast i benchmarks du märker skildnad idagsläget
Agreed
i would have kept it with 16gb that ram speed will effect performance
TUF AF 💪😎
Grrrr
The Ram is T-force delta, no tuf
Please read what it says on the ram again……..pretty sure it says “Tuf” right on it 😉
@@ThePcRehab no it says t-force brand same as the drives not asus exactly, its tuf gaming alliance certified sub brand but not exactly asus tuf. but it is a tuf prebuilt tho use t-force and coolermaster parts when they dont have something asus branded to go with
i would like to ask if i get a good deal i won an auction on rx 580 8gb for about 30 dolars 750Kč
Yeah that is a good deal
Buying this for $400 is ridiculous
Haha RIGHT?!?!?!??
nice
I’ve been flipping for 3 months the biggest problem i have is not enough profit and wait time to sell.
Yeah it’s a rollercoaster for sure. Sometimes you make a killing and sometimes you don’t make much at all. Same thing goes for selling the pc. I have sold computers in 30min after posting and I have held on to systems for a month. You are really at the mercy of your market
Doing the lords work 🙌
Hahahaha
Nice ❤❤❤
Thanks 🤗
The fact I got a 2060 for 50 bucks off offerup makes this 2060 feel overpriced lol
That’s a sweet deal
This is an swsome build and thank you for puttiong your health at risk for cleaning this systm. If the editing System yopu have planned is a give away I'm not goiung to worrty about it becauase not on discord all that often due to getting back to work, So adulting is taking prioraty at the moment. I would love to win a PC/ Build one of my own top the needs I have, I wish everyone luck.
Speeddd
Yo do you wanna collab! I live in india and was thinking we could do a pc building competition 100 dollars in america vs 100 dollars in inda (8500 ish rs) what do you think? Video 5 of asking
Lol $100 is too small. $400 and I’m in
@@ThePcRehab thats the challenge ill see if i can find the funds and tell you
👍
@@ThePcRehab I'd do the $400 challenge
Better message me on discord my dude
send me that 2060 i need it for a build im working on xdxd
4th time i saw you get a facebook / marketplace pc for a price that is "simply unbelievable " its like your ripping off the person or they have very little common sense when selling 2nd hand pc's , surprised you didnt change the pcu a tuf power supply
This is only the 4th time? I have gotten wayyyyy more then 4 unbelievable deals lol.
bro u make good videos but, showing every part cleaning is too boring, video is 25 min long and ur cleaning that pc for 10 min cmon man that's boring
First!! haha
Yes you are!
Mediocre build, unsubscibing
Is what I would say if I were a troll
So nice you had to say it twice lol
@@ThePcRehab it didnt show the first one until now 😂
PC Rehab and Curious Cars have a common Florida living in Florida humidity observation. mb
default to memory wellll . . . 5800X3D + 3070 or a 3080ti or 69/68XT. mb
oh I get it, the price is not $1100 but $1100 plus the 32/16 or 36/16 upgrade 32 GB to 64 GB dual channel ram and Vermeer CPU upgrade. $2K. mb