WATER PUMP & BYPASS HOSE REPLACEMENT (1993-'98 JEEP GRAND CHEROKEE)
HTML-код
- Опубликовано: 7 май 2019
- Replacing the water pump on my 1997 Jeep Grand Cherokee. This process only applies to the 5.2L V8 model Grand Cherokee & Dodge trucks
GearWrench fan clutch service kit review video:
• GearWrench FAN CLUTCH ...
Music by Cisalo Harris Авто/Мото
GearWrench FAN CLUTCH SERVICE KIT REVIEW VIDEO ruclips.net/video/iAsE7tHE9Uc/видео.html
Thanks man
By the way... 😭😭 you have saved my ass one too many times with these video i really appreciate you taking the time to make these
everything you need to do the job and no bs. excellent lighting, no shaky cam, and all the details 5 stars and 2 thumbs up!
“No problems, only Solutions”…that’s the spirit!
You sir are the reason my Jeeps still live on !! Thank you 🫡
I just pick up a 98 Cherokee and I’ve done all my maintenance off your videos thanks my dude
I'm going to need you to run for president one day. Your campaign slogan "No Problems, Only Solutions."
"No problems only solutions." was catchy.
Clear instructions and great video editing. Thanks for sharing.
I'm from Brazil, and I always see your ne help a lot during the maintenance of my grand Cherokee, congratulations on the work!
Looking to pick up a ZJ with a leaky water pump, I have a feeling that it is also the bypass hose that is also causing the leaking, thanks for showing through detail of what YOU do to replace the parts.
Also, a factory Chrysler part that lasted over 270k without being replaced should be in a museum or in the Book of world records. Lol.
Very good video and well explained. I replaced the water pump & by pass hose on my 97 5.2L GC with the help of your video. Very helpful. Thank you.
This makes me happy I have 4.0's in all my jeeps.
V8 for life
I'm with ya on the I-6's
@@fiveninegarage idk for a retard like me who’s just getting into the scene, without many tools this replacement was a little hectic lol. Good learning experience though.
Your optimism on life and comedy are a breath of fresh air bro
Your videos really are the best for ZJ work. Thanks again. You've saved me literally thousands of dollars in labor fees.
My bypass hose split while in line at the emissions testing place. Limped it home, and was really happy to see this video. Thank you.
Great camera angles & editing! This is some of your best work to date. Continuous improvement - Kaizen! Zeeepin it real! ZJ Red Alert ;)
Thank you sir i think you are the only video on RUclips for this specific job, you helped out a ton!
Great videos. Great explanation and love the fact you give out part numbers and take the time to show great camera angles. Thanks for taking the time and sharing. !!!
Love watching your non mechanical commentary, first time I needed your mechanical assistance, thanks for the video
My Jeep started leaking coolant. After watching the video I’m now sure it must be the water pump. No wonder the heater don’t work in full blast in mine, but the AC blows super cold air!
I changed my started after watching your videos!
Great work!
Thanks bud. You taking a video of everything had to take you for ever. Which makes me appreciate your dedication to helping people learn. You definitely helped me. Thank you.
Thanks for watching
Appears the bypass hose failed on my '98. Thanks to the excellent details provided by you in your video, I got this! Thank you!
You have the coolest tools. Great video again!
I couldn’t have done the work on my jeep without these videos.
Thank you
You put this video up just in time! In the process of doing this now. Thanks!!
Its super easy just a little time consuming removing all the fastners but you got this bro. Im glad I could help out in some way👍
Thanks for the detailed video man! Well put together and easy to understand!
I like your level of attention to detail. I have agreed to do this same job for a friend and had subscribed to your channel a few days ago after being suggested some funny videos. You said "catalytic converter" and I said subscribe. Anyway, searching for a 95 grand Cherokee v8 water pump video resulted in this video, which I found extremely helpful.
I'm on my third Cherokee and these vids are great but the tips are priceless, good job
Just found your channel and am impressed. I've located a 95 ZJ, specifically a GCL with the 4.0L and am on the quest for knowledge so I can do some of these repairs, diy style. Thank YOU, for the great topics and on point presentations of each projects subject matter. I see you also have a sense of humor. WORD. Yessir. Subscribed. Liked, commented, and I'll be back cause', like you said, "there are no problems, only soutions"
Thanks for the video man, helps me a lot again like the rest of your videos!
My waterpump died today and a new one is ordered :)
I will have to do it by hand, I don't have such a nice Milwaukee tool.
Keep on jeepin and greetings from germany.
I’ve seen yours vids before and been impressed. This one is really good thanks very much for your time, skill and effort.
Hell yeah man. I just got thru taking the old water pump off. Wish i had found your video sooner. Great camera work and explanations. Subscribed to save me some future head aches.
Thanks, I have a lot of ZJ repair videos on my channel
This video saved my ass!!! Thank you very much barricade garage!
Great video, amazing angles, and the fact you show every bolt being taken out, the sizes, and everything else extra that's needed!
Thank you very much man! Appreciate the hell out of you for making this video! 👌
The best how-to video i've seen so far.
I wish I found your video about a month ago.Great step by step instructions
Just wanna say thank you .. this video walked me through my wp on my 98 limited with a 5.2 .with the right tools u can do anything.
You make the best videos by far. Thank you for that
Great tutorial! Great photos and detailed instruction 👍
Thanks for making this video. I sort of knew how to get in there.. and had a plan. This is about what I expected. Thanks again.
Excellent video thanks for taking the time to post 👍
Awesome video this dude knows how to do a "how to video" best one I've seen Thanks so much.
dude, you really did make the best vids
I'm about to deal with this on my 94 laredo and also want to thank you for sharing. Subscribed!!
comin thru clutch once again my G!
I wish you would have done this a month or so ago. I had to replace the bypass hose on my ZJ. It's not a hard job, just lots of steps for a 2 min replacement.
Great work as always!
Kyle White lol. I wish a video like this existed when I replaced the bypass hose & water pump on my 1st jeep because I didnt know what the hell I was doing and the only videos that would come up were for the XJ 4.0
A+ video thanks for posting this helped me get it done without alot of headache
excellent work
Awesome instructional video, thanks for making.
never mind. I just watched your video on the gear wrench. Great stuff here.
My dude!
Thanks for the awesome video. Helped me out a ton. Almost done with it hoping for no leaks...
Thanks my guy. Subbing for ya
Another awesome video.
I'm about's to change the water pump on my WJ. Assuming it will be a similar process.
Thanks again for a great step by step vid 😃.
Its not a similar process on the WJ
fixed my car today cause of you thanks man
Glad I could help out
Thank you for this video saved a lot of money!!!
digging your videos
Another great how to video!!
great Video, thank you from germany!
Great video!!
Nicely done video and repair. I don't even own a jeep and watched the whole video lol
Nice work !!
Excellent video, thanks for the details
Love your videos! Man cars and trucks are a pain to work on... I guess there might be a case for electrified vehicles after all!
You helped alot ! Thank you !
7:39 time mark, I believe that bolt is the one that goes through the pump and timing chain cover. Not sure, just off the top of my head. Is the place where I had the timing chain cover gasket failed on my '97 ZJ's 5.2. So check there as a possible source of leakage. So I did replace my timing chain and gears since I had to replace that gasket. Easiest way to break the dampener bolt loose it to use a breaker bar resting on the frame and kicking over the starter. Outside of Barricade's content, feel free to refer to the Jeep Forum(s) as needed also as they have the torque specifications listed. Once again, great coverage. :)
It works best to leave the top hose off while refilling the rad until coolant comes out then reconnect and continue filling with the coolant funnel. Sometimes these motors can be very difficult to get the cooling flowing after a complete drain of the system for some reason. It's like there's a huge hydrolock going on.
Sincerely, thank you sir.
I'm on my fourth jeep and in each I cut the fan shroud off leaving only the top part that covers the fan. Makes it so easy to only remove the two nuts and the top comes off.
thanks again...
had a crack in my radiator so i decided to just put in a nice looking used one .... then i got trans fluid in that radiator and my water pump started leaking ... so i went and got a new radiator, water pump, hoses... i broke the shroud into multiple pieces trying to cut corners putting it back together, the new radiator is nice but cost me over $200, spent extra on the water pump so i could get the new bolts and that little tube thing that goes to a heater hose ($130+) it came with the bots somewhat fixed into the holes so i was like great i don't have to remember which holes get what bolts but when i went to put it on two of the bolts were switched (took me about 30 minutes to figure that out, after many swear words) then when i got it all together put water in to check everything and one of the ($30) hoses has a mark where it looks as if someone ran a razor on it. (its not all the way through but noticeable when the hose swells.)... as much as this shit cost you would think quality would be great, i am disappointed but everything seems to be okay at the moment.
>>> my question is if water gets into the trans fluid it would turn pink milky like the radiator did, right?
Nice nice video 3 days of looking how to do this and you get absolutely the best it's how to congratulations thank you very much I didn't see where the thermostat was changed do you have any put a job that job
Another awesome video
Keep up the good work and great vids brother . Hopefully you don't keep having to work on her though i hope i aint gotta keep working on mine i just got a 96 grand cherokee limited it's nice but needs sine docering that's why i been watching you . Great job Godbless
Some doctoring lol my bad
Eres el mejor amigo saludos broder
This 8s a great video help alot
You are se Best bro
Bro you rock! Thanks! How ya getting PPSI without the right tool? Touch? Gimme a secret. I'm ready to send my 96 ZJ to you!
Great videos brother. May I ask Where did you get those smooth hose clamps for the bypass hose?
This channel has helped me so much with my zj..thank you i appreciate it alot.especially with the step by step and the fact that you let us know what size tools we need.thanks again!
Crack! Thank you so much!
Good video bro, but wow that was a lot of work.
Need a little help, have a 96 zj, 5.2 . Running hot when I have ac on, water pump been replaced, new thermostat, radiator a few years ago, The fan clutch , how to check? Also how long do they last? 150000 miles on it. Upgrades or Oem? Heavy duty or stock?
One really important thing to watch I'm not sure if I missed it or not but you need to keep track of all of the bolts and where they came from the water pump bolts and the accessory bracket are all different lengths.
A really neat trick is to use a piece of cardboard and draw what the water pump looks like and put holes where they came from and stick the bolts in the holes in the cardboard so you can put it back exactly how they came out.
leakyjeep5.9 6:55-7:04
@@barricadegarage5361
Oops, I was hypnotized by the sound of that wrench you got.
I dig your videos bro! I'm considering purchasing a 98 5.2 L and your videos make me comfortable about doing repairs as well as giving me an idea of what to look for and how to access potential issues. Would you say that most water pumps on the ZJs last around 250k miles? I know it would depend on other maintenance factors and conditions but just in general? Keep making videos, they're definitely enjoyable and informative.
The original waterpumps last a long time but the aftermarket ones might not
I'm just going to leave this here, I have a 95 5.2L, I am currently replacing my water pump because it has failed. Currently at 205k but I think it has had issues for about 20k. periodically it'll dump coolant everywhere. I was avoiding replacing it but now the pulley has seized so I guess I need to now. Along with the Serpentine belt...
Some models of that fan shroud actually have a removeable snap-in segment at the very bottom. Barely slide your head under, pop it out with a standard body plastic rivet removal tool (aka screwdriver,) and this removes about a 10" section. This then, allows you to easily pull the shroud out/in, without needing to also remove the fan. It makes any job around this MUCH easier. Note also, since this is an OEM possible option, you can also make your own with a pair of tin snips, and just remove the same segment from the bottom of the shroud's plastic housing.
Thanks!!!
I looked up the part number for the bypass hose and it says it doesn’t fit 98 grand Cherokee…. Will it still fit anyways?
Oh ! And the 98 has an interesting change - the shroud has a removeable section in the bottom width. You can mod the 97 once out, with a simple pair of tin snips :)
hey where did you get air breather and tube at
Thanks for this vid. Guess what I'm doing this week on my 5.9...
That Mikita makes quick work of it.
Looking at all of the RTV that's a factory core that has been rebuilt. Both of our 1996 5.2's are on their 3rd water pump with 115000 miles and 145000 miles on the other.
Does anyone know the size of the the o-ring that goes on the heater hose?
Hey , Are you Using The Milwaukee M12™ Cordless 1/4" Ratchet ?? Thanks 🙏🏼
is it possible to get the old bypass hose off and new hose on without removing the water pump ?
A+
I have a 95' 5.2l, is mopar 68382493AA the correct part number? thanks for the great videos, always help me out
The first water pump I replaced I did everything here.. The second time, I pretty much just did the pump and thats it, since the bypass hose was not that old. Then when I did the timing chain I went all out again lol.
No rtv?! Nice. I hate that crap.
Hello, I have a 96 ZJ with the V8, when I squeeze the hose from the radiator to the thermostat, it hisses
Which parts should I purchase?
Hey . What type of Milwaukee Electric Tool is that ? Thanks
Hello I have question about changing the transmission fluid on a 09 mitsubishi galant, will it mess up the transmission if the car have over 95,000 miles on it. And how much does it cost to get it done. Thank you
Virginia Jones no it will not mess the car up and if you have the fluid changed at a shop it might cost you anywhere between $150-$300 but its a simple task on that vehichle
Danco #28 o ring at a hardware store for the heater tube. I have a bag of them from amazon just in case.
Nice background lol
I accidentally mixed up my bolts putting it all back together and have to start at the beginning but am struggling to figure out exactly which bolts go where. Your video is closest but it's still hard to tell with some bolts being only slightly different lengths. Do you know of any schematics that might show this? I can't seem to find any online.
I cant find schematics but we will get this straightened out. I started removing the water pump bolts at 7:25 going counter clockwise. Use video refrence starting there the correct location.
7:25 ~ SHORT BOLT
7:30~ LONG BOLT
7:38~ LONG BOLT
7:52~ SHORT BOLT
8:04~ SHORT BOLT
8:23~ LONG BOLT
8:45~ LONG BOLT
....The replacement bolts are
Dorman Part No. 902-805
May have been pointed out already, but for the 5.2, that fan is shaped like a human - 2 legs, arms, and a head. If you line it up just so, you can slip it out of the bottom without removing the shroud. That said, removing the shroud ALSO gives you a much nicer working space for dealing with the pump, so...
I am curious as to how long this took you to do. Prodemand pays 1.5 hours. It took me 3.5 without the experience of doing one before. You seemed like you knew what you were doing. Just wondering how long it took you. Great video too btw.