How do you find the Launch DPF cleaner compared to when you used the wyns cleaner? I used to remove the dpf and soak it in the wyns cleaner, but it doesn’t seem to work as well as when you spray it into the dpf like you do. Would you say the launch product and pump works better than the wyns with the pressure bleeder method? Thanks and keep up the videos! 👍🏼
Way better using the compressor and gun. There just wasn't an easy way for me to use a compressor on the road until milwaukee made these units. Even using wynns in the Launch gun works well
@@ORileysAutos yeh a compressor makes it much easier in general - I have a small compressor ready to go in the van for that purpose but need to sort out a battery and inverter for it. But would you say the wyns cleaner method worked well enough despite not having a compressor?
@TTA Timbo I had a point nozzle cone I got from my tool drawer that made it froth up. I'd clamp the hose until I built up pressure. If it doesn't Froth up it won't work well
@@ORileysAutos I see! I did wonder how you made it froth up with the brake bleeder kit. Thanks for the information, much appreciated! I’m fed up of removing dpfs to clean them it’s far too much work for what I earn from them! I think I need to get the launch dpf gun - a friend has one and also says they are good
Same vehicle here. Got Diagbox and followed same procedure for all three of the DPF codes you got. Bought a spray can of DPF cleaner and put it into same port. it doesn’t seem to have done the job. What’s the difference with a compressor and gun using 50% water?
Hi i have a question about a dpf sensor on my rav 4 its showing minus reading its going from -1 -2 up to 40-50 value but the sensor its ok can a clogged hoses from the dpf show that kind of values?
Even after disconnecting and connecting the battery, the code could not be erased, any better idea? The pressure sensor is new and the filter is cleaned.Maxicom MK808.
My Toyota proace engine fault light comes and goes by itself. Took it to garage but it's still not clear. Once AA told me the fault from my battery terminal.
Do Toyota share Peugeot Citroen engines? They seem to have same issues with engine. Even the main dealers are overrun with adblue dpf issues Soz just read the description Citroen Peugeot
Good job Jimmy , I looked at a nissan xtrail 2.o diesel 2019 , 18500 on clock , adblue range 436 fault on dash , he took it to dealer they said needed regen £650 !! I checked pressure values they were 45mbar at idle and 250 at 3000rpm , I cleaned it out using launch fluid and cleaned dpf , the adblue light still on same fault , I checked level it showed 11.6 litres , it holds 17 ltr so I tried to top up but full , it wont reset , I'm using topdon pro , when I reset it goes out for 1 second but back on , power and ground ok at adblue module , not sure if any known faults or maybe a software update , any ideas Jimmy , cheers
I met one of your customers today, range rover London guy , oil temp fault , it was 6 months ago all good except the pipe you recommended to be replaced burst in east grinstead I repaired , he said you were brilliant as he had spent thousands trying to fix and drove up to you and you fixed in the usual Jimmy way
![Eminem - Fuel (Shady Edition) feat. Westside Boogie & GRIP [Official Audio]](http://i.ytimg.com/vi/k1OquBida9s/mqdefault.jpg)
Really happy with results and ordered all the parts recommended, one happy customer thanks pal.
Glad it's running good again 😀
Good job Jimmy 👍 you’ve been treating us to a variety of makes lately.
Thanks
Just watched this video missed it the 1st time, Good job
Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
How do you find the Launch DPF cleaner compared to when you used the wyns cleaner?
I used to remove the dpf and soak it in the wyns cleaner, but it doesn’t seem to work as well as when you spray it into the dpf like you do.
Would you say the launch product and pump works better than the wyns with the pressure bleeder method?
Thanks and keep up the videos! 👍🏼
Way better using the compressor and gun. There just wasn't an easy way for me to use a compressor on the road until milwaukee made these units.
Even using wynns in the Launch gun works well
@@ORileysAutos yeh a compressor makes it much easier in general - I have a small compressor ready to go in the van for that purpose but need to sort out a battery and inverter for it.
But would you say the wyns cleaner method worked well enough despite not having a compressor?
@TTA Timbo I had a point nozzle cone I got from my tool drawer that made it froth up. I'd clamp the hose until I built up pressure. If it doesn't Froth up it won't work well
@@ORileysAutos I see! I did wonder how you made it froth up with the brake bleeder kit. Thanks for the information, much appreciated! I’m fed up of removing dpfs to clean them it’s far too much work for what I earn from them! I think I need to get the launch dpf gun - a friend has one and also says they are good
Same vehicle here. Got Diagbox and followed same procedure for all three of the DPF codes you got. Bought a spray can of DPF cleaner and put it into same port. it doesn’t seem to have done the job. What’s the difference with a compressor and gun using 50% water?
Hi i have a question about a dpf sensor on my rav 4 its showing minus reading its going from -1 -2 up to 40-50 value but the sensor its ok can a clogged hoses from the dpf show that kind of values?
the dark color in cooling bottle is probably due to a damaged head gasket ?
Even after disconnecting and connecting the battery, the code could not be erased, any better idea? The pressure sensor is new and the filter is cleaned.Maxicom MK808.
My Toyota proace engine fault light comes and goes by itself. Took it to garage but it's still not clear. Once AA told me the fault from my battery terminal.
Really shiney exterior but that engine bay is bogging, coolant colour is very concerning. 135k miles though.
Do Toyota share Peugeot Citroen engines? They seem to have same issues with engine. Even the main dealers are overrun with adblue dpf issues
Soz just read the description Citroen Peugeot
Not a real toyota is it 😆
@@ORileysAutos haha 👍
Good job Jimmy , I looked at a nissan xtrail 2.o diesel 2019 , 18500 on clock , adblue range 436 fault on dash , he took it to dealer they said needed regen £650 !! I checked pressure values they were 45mbar at idle and 250 at 3000rpm , I cleaned it out using launch fluid and cleaned dpf , the adblue light still on same fault , I checked level it showed 11.6 litres , it holds 17 ltr so I tried to top up but full , it wont reset , I'm using topdon pro , when I reset it goes out for 1 second but back on , power and ground ok at adblue module , not sure if any known faults or maybe a software update , any ideas Jimmy , cheers
Did you reset adblue inhibitor? Reset nox quality sensor? Adapt new nox sensor? Adapt new catalyst etc
@@ORileysAutos
I did a few adaptionions , gunna try m8 latest autel scanner just incase mine playing up ,thanks for getting back to me appreciated
Hi you come my home and repair same problem
P246c je netoiyan là filtre particul ce même default Expert 4 2020
My toyota procace is not started
Sadly not a Toyota , what is Toyota thinking ?? However brilliant fix
I met one of your customers today, range rover London guy , oil temp fault , it was 6 months ago all good except the pipe you recommended to be replaced burst in east grinstead I repaired , he said you were brilliant as he had spent thousands trying to fix and drove up to you and you fixed in the usual Jimmy way
The gentlemen does brilliant work on vehicles👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍