Harbor Freight Central Pneumatic AIR OPERATED BARREL PUMP - Demo and Review

**This pump comes with a short pour spout. I removed the pour spout and installed a 3/4" fuel hose. Below is what I used.
-Central Pneumatic Barrel Pump - amzn.to/3Gxc2t1
-Fill Rite Fuel Hose - amzn.to/3LgvP3j
-3/4" shutoff valve - amzn.to/3uy7LTW
*Check out my amazon store for more great tools and products! www.Amazon.com/... I greatly appreciate your support of my channel, Thank you!*
#HarborFreightBarrelPump #AirOperatedpump

[@macbeliever]

So rather than pump the oil out with a piston pump, this basically turns the barrel into a keg with positive air pressure? Do I understand this right?

[@rednecktech82]

Exactly.

[@macbeliever]

@@rednecktech82 is there any way to avoid the barrel bulging? Or is this unavoidable?

[@rednecktech82]

When I have time I may weld up an angle iron frame to put over the top and bottom, otherwise no.

[@rcppop3090]

This thing is dangerous AF! I bought one to fill my concrete pump and I thought it was going to blow the 55 gallon drum up at 4psi I DO NOT RECOMMEND this pump.

[@rednecktech82]

Umm, you know it has a regulator right? Don't run more than 10 psi, the lid will bulge yed but it will be nowhere near exploding. Been using mine with the same 2 barrels since this vid with zero issues.

[@leonvdm]

55 inch owww yeeaaahhh lol

[@fernandocid1200]

How do you adjust the valve like height so it fits my barrel

[@rednecktech82]

I cut mine down so it was about an inch from the bottom. The barrel will bulge slightly with first use.

[@rednecktech82]

If you're talking about the top section that screws into the barrel there is no adjustment, there you should have plenty of clearance on a standard 55 gallon drum unless you have some really high lip around it for some odd reason.