Supercharged 190e Sound Check | Engine Swapped Mercedes w201 190E
HTML-код
- Опубликовано: 8 ноя 2021
- Some clips of my swapped 190e. I swapped the 2.3L m111 supercharged from a Mercedes SLK 230 into this 190e. Running 70mm pulley, supersprint header and stock injectors. Is running great but there's a little more power to be unlocked with bigger injectors and a re-tune.
Exhaust sound pretty bad, I need to add a resonator to get rid of the tin can like sound. Currently running a straight pipe to the backbox.
Follow my instagram for more / dutch.190e 
Авто/Мото
Love it pal 🤩
Brilliantly done..
Quick question I just swapped a 2.2 m111 from a 94 w124…into a 94 c180…
Will the m111 start and run with the engine harness loom connected???
sir did you needed to change the transmission , driveshaft, diff, axles or any part of the drivetrain or suspension of the 190e?? or did you run it with all stock parts and only suffered with the wiring? NGL and TBH the noise that thing makes is really ASTONISHING i'll mostly do this swap to my supposed daily 190e if Allah will
Everything from the transmission back is stock. Only used a different flywheel to make it work with the engine. Transmissions bolts right on, same bolt pattern as the engine :)
Thinking of doing this swap for my 190, if you don’t mind how difficult of a swap was it?
It was my first time doing an engine swap. Doing all the research and getting to know all that stuff about wiring and sensor was the most difficult. Mounting the engine was pretty easy, it bolted right up to my original transmission. It took me about 9 months to complete the swap (working on it every evening and weekends) 😁
Shiitt leip man ik wil 190e swappen met deze motor erin plus evo bodykit
do a engine tour
im also doing the superchager with m111 2,2 engine but I'm stuck
I had one ready but I lost the video lol. Will make a new one some time soon :)
hi, great build....how did you get the rev counter working?
My current dashboard didn’t come with a rev counter 😅 have to yet come up with a solution for that haha
Are you using the original diff?
yeah still using the stock open diff, I am looking to upgrade it to something better
What wheels are these
They came from a mercedes b-class, I sprayed them gunmetal gray :)
@@dutch.190e They look good on the car 17s?. I have a 190e of the same colour with the same plan but with a tvs1320 supercharger or a m113 v8 swap. With your pulley change you must be close to sub 6 secs
how much psi??
12 psi 😁
@@dutch.190e i am planning to install a eaton m65 supercharger on my w124 with m102 enginem , i hope it works fine ...