This NUE MASTER Tool is One Of The Cheapest Toraty Tools On Amazon... But Is It Actually Any Good? 💲Check this tool out HERE: amzn.to/3WhxSsY ⚒ Learn about the Dremel 4300 HERE: ruclips.net/video/Qa6x-c-UdsE/видео.html QUESTION OF THE DAY: 💡❓ What is your favorite power tool?❓💡 - I read and reply to every comment so I would love to hear your answer in the comments below! 📝Disclaimer: This video is NOT sponsored but attached products and resources may be affiliate links. ( : 📕Show Notes📕 1⃣ (VIDEO) Power Carving 101: The Best Rotary Tool Options in 2022: *Video by Cornelius Creations ruclips.net/video/pUuw_KMlw7A/видео.html 2⃣ (VIDEO) Best Rotary Tool for Creators? Dremel 4300 Review! ruclips.net/video/Qa6x-c-UdsE/видео.html 3⃣ (PLAYLIST) Tools for Crafters and Makers! ruclips.net/p/PLuHhKcogeDO9fsWi5jtw9qKtc6NK15SLq 4⃣ (TOOLS) Check out my recommended rotary tools on Amazon (affiliate) 💲NUE MASTER rotary tool kit: amzn.to/3WhxSsY 💲Dremel 4300 rotary tool kit: amzn.to/3uZ9IaY 🎉🎉Get A Compleate Cardboard Crafting Action Plan for FREE: thoughtful-knitter-1761.ck.page/d3a6425d2 Have a Blessed Day, - Eli Tennant
Favorite power tool is a toss up between the oscillating multi tool, and a rotary tool,of course. M12 rotary tool and M18 oscillating tool are my favs. Then again I love the angle grinder and die grinder too, super useful. And then there's ....Ugh we'll just say all power tools are my favorite!
Wow, Andrew! You really know what you're doing when it comes to power tools! It is so great to have the right power tool for the job and it can make projects go so much faster and be so much more enjoyable. Have a blessed day - Eli
The button placement is just like you said - it’s not about the user experience as much as functionality. It’s tough to get all that crap into that tool. Favorite tool: (used to be into it stripped out and the company won’t respond) Rockwell mini saw
Thanks for saving my time and this video is entertaining also there are cheaper ones like 22$ It comes with drill locator, shield and flex shaft (in india)
If those diamond bits wouldn't even mark the glass then they were REALLY crappy bits,its nothing you were doing wrong they are the correct bit for glass. Cheaper rotary tools are awesome for having extra tools,and for beater tools, but when it comes to accessories there's no comparison to the quality of Dremel bits. They they just last so much longer, and are actually concentric when spinning
Thank you so much for sharing this comment. I kind of wondered about that... The bits sort of just seemed like textured metal and probably didn't have any real abrasive material set in them. I should have gotten my Dremel bits out and compared them to see what a high quality bit could actually do. Thank you for sharing your expertise, Andrew! - Eli
Foredom is a cool brand and, like you said, a little pricey. But if you're going to use the tool a lot, I definitely think it would be worth it. They are so much smaller and more maneuverable than rotary tools that have the motor built in. Granted, you can always use a flex shaft but it isn't as seamless. I hope you find the tool you're looking for! Blessings, Eli
@@MakerBrain kind of stinks that such quality items are so expensive but such is today's life. Thanks for your review by the way as i forgot to write it in original comment.
Honestly, I am surprised that I don't use it more. I want to set it up so that it hangs from the sealing and the flex shaft is available for any project that I am working on. The milling cutters are certainly nice 👍. Have a blessed day, DIY Master 101! And I hope you can get a rotary tool like this one soon. - Eli
Thank you, Ameer Ally! I love being able to help you with crafting tips and tools. I was super excited about this video because it is one of the longest videos I have ever made and I got to test a tool that a company sent to me. Have a blessed day, - Eli Tennant
That is a good question, it has been a while since I have tried to interchange the tools. If I recall correctly, the collets are not all the same size so the Dremel tools don't work unless you use the universal 3 jaw chuck from the Nurmaster tool. The 2nd thread attachments might fit, but I am not sure. I am sorry that I am not able to help you more, but I hope this helps. Have a blessed day, - Eli
Hmmm, that is a good question, Casique. I have never used the Black and Decker tool so I can't really give you an answer. But if you are super serious about power carving I would certainly recommend Dremel. If you only plan on using the tool every once and a while then you should probably go with a cheaper option like Black and Decker. Thank you for commenting! - Eli
@@MakerBrain dremel 4000 has 175 watts of power and starts from 5000 to 35,000 rpm. black & decker 125 whatts of power and starts from 0 to 35,000 rpm. I heard that black decker has problems with the flex shaft since it is off center. The technical service informs users that there are no black decker spare parts. I don't know if it's the machine or the people who mistreat it. I need you to give up the machine to use it frequently, taking precaution.
@@MakerBrain I need it for everything. polish bronze and it looks like a mirror. brush metals, drill: glass, crystal, wood, metal. cut iron or aluminum, pipes etc. I read that when putting the flexible shaft the machine loses speed approximately 1500 and 2000 rpm.
Hi Casique, I am not able to make a decision for you, but I have really enjoyed my Dremel and I think that it would be a great opinion for you if you are going to do so much with it. There are some different options from Dremel that might be better for you with a flex shaft. Of course, if you are on a super tight budget then you will have to go with a cheaper brand but they probably won't last you as long. I wish you the best of luck! - Eli
@@MakerBrain The machine is more important than the accessories. I buy quality although lately it is not good and even so in this case I am looking for quality. If you ask me, I think that people don't know how to handle a moto tool. Thank you for the information and the time to write to me.
Thank you for noticing that. There are cheaper rotary tools, but this was the cheapest full-size rotary tool at the time of making the video. However, there were a couple other options that were the same price.
@@MakerBrain The one I have came with everything yours has minus a few accessories. but I only paid $20. It's super heavy, has the flex shaft and it's really powerful. I think its currently going for $24. but it has never been $40. But there are quite a bit of full body rotary tools that come with a flex shaft and the other accessories in this kit that are $30 and below. But nonetheless your review of the tool was great. Thanks for sharing.
Hmmm, thank you for letting me know. I should have done a deeper search on Amazon but I am glad you got a good deal on your tool! Thank you and have a blessed day, - Eli
Will you stop calling the pink ones tungsten carbide!! Those are for engraving stone,, tungsten carbide are the ones you used on plastic and should be used on metal,, turns it into a mini die grinder
Thanks for sharing your thoughts, Jimmy. The 4300 is definitely a much higher quality too, but the truth is that this can do a lot of the same things pretty well. Have a blessed day, - Eli
This NUE MASTER Tool is One Of The Cheapest Toraty Tools On Amazon... But Is It Actually Any Good? 💲Check this tool out HERE: amzn.to/3WhxSsY
⚒ Learn about the Dremel 4300 HERE: ruclips.net/video/Qa6x-c-UdsE/видео.html
QUESTION OF THE DAY:
💡❓ What is your favorite power tool?❓💡
- I read and reply to every comment so I would love to hear your answer in the comments below!
📝Disclaimer: This video is NOT sponsored but attached products and resources may be affiliate links. ( :
📕Show Notes📕
1⃣ (VIDEO) Power Carving 101: The Best Rotary Tool Options in 2022:
*Video by Cornelius Creations
ruclips.net/video/pUuw_KMlw7A/видео.html
2⃣ (VIDEO) Best Rotary Tool for Creators? Dremel 4300 Review!
ruclips.net/video/Qa6x-c-UdsE/видео.html
3⃣ (PLAYLIST) Tools for Crafters and Makers!
ruclips.net/p/PLuHhKcogeDO9fsWi5jtw9qKtc6NK15SLq
4⃣ (TOOLS) Check out my recommended rotary tools on Amazon (affiliate)
💲NUE MASTER rotary tool kit: amzn.to/3WhxSsY
💲Dremel 4300 rotary tool kit: amzn.to/3uZ9IaY
🎉🎉Get A Compleate Cardboard Crafting Action Plan for FREE: thoughtful-knitter-1761.ck.page/d3a6425d2
Have a Blessed Day,
- Eli Tennant
Favorite power tool is a toss up between the oscillating multi tool, and a rotary tool,of course. M12 rotary tool and M18 oscillating tool are my favs. Then again I love the angle grinder and die grinder too, super useful. And then there's ....Ugh we'll just say all power tools are my favorite!
Wow, Andrew! You really know what you're doing when it comes to power tools! It is so great to have the right power tool for the job and it can make projects go so much faster and be so much more enjoyable.
Have a blessed day
- Eli
The button placement is just like you said - it’s not about the user experience as much as functionality. It’s tough to get all that crap into that tool. Favorite tool: (used to be into it stripped out and the company won’t respond) Rockwell mini saw
Yeah, cheap tools are rarely perfect. Thank you for leaving your comment.
Thanks for saving my time and this video is entertaining also there are cheaper ones like 22$ It comes with drill locator, shield and flex shaft (in india)
Thank you for this video. This saves me a lot of time🎉 Have an awesome day!
I am so glad I saved you some time.
I hope you have an awesome day as well!
At the end of the day, any cheap rotary tool is ok, the generic flex shaft is garbage, get the proper dremmel flex shaft as soon as possible
Great review by the way!
Thank you!
I appreciate you taking the time to comment. (-:
Have a blessed day,
- Eli
If those diamond bits wouldn't even mark the glass then they were REALLY crappy bits,its nothing you were doing wrong they are the correct bit for glass. Cheaper rotary tools are awesome for having extra tools,and for beater tools, but when it comes to accessories there's no comparison to the quality of Dremel bits. They they just last so much longer, and are actually concentric when spinning
Thank you so much for sharing this comment. I kind of wondered about that... The bits sort of just seemed like textured metal and probably didn't have any real abrasive material set in them. I should have gotten my Dremel bits out and compared them to see what a high quality bit could actually do.
Thank you for sharing your expertise, Andrew!
- Eli
I know foredom is expensive. I have been looking around for their high torque micro rotary tool review.
Foredom is a cool brand and, like you said, a little pricey. But if you're going to use the tool a lot, I definitely think it would be worth it. They are so much smaller and more maneuverable than rotary tools that have the motor built in. Granted, you can always use a flex shaft but it isn't as seamless.
I hope you find the tool you're looking for!
Blessings, Eli
@@MakerBrain kind of stinks that such quality items are so expensive but such is today's life. Thanks for your review by the way as i forgot to write it in original comment.
@@nobodyisprfct yeah, that is still sort of the way things are. Thanks for sharing
I need one of these. So many things to use it for
I know, right! It can really speed up many of the things that you do in crafting projects.
- Eli
I need one of these very nice those milling cutters are really nice 👍🏾
Honestly, I am surprised that I don't use it more. I want to set it up so that it hangs from the sealing and the flex shaft is available for any project that I am working on. The milling cutters are certainly nice 👍.
Have a blessed day, DIY Master 101! And I hope you can get a rotary tool like this one soon.
- Eli
@@MakerBrain thanks bro it looks really nice tool
@@MakerBrain that set up idea is really is a really good idea
I love your vids
Thank you, Ameer Ally! I love being able to help you with crafting tips and tools. I was super excited about this video because it is one of the longest videos I have ever made and I got to test a tool that a company sent to me.
Have a blessed day,
- Eli Tennant
Good information. Thanks!
I am glad to be of service.
Have a great day!
- Eli
Can you use DreMel accessories with it?
That is a good question, it has been a while since I have tried to interchange the tools. If I recall correctly, the collets are not all the same size so the Dremel tools don't work unless you use the universal 3 jaw chuck from the Nurmaster tool. The 2nd thread attachments might fit, but I am not sure.
I am sorry that I am not able to help you more, but I hope this helps.
Have a blessed day,
- Eli
Nice,get it!
Thanks!
Hi! I from Argentina.
Moto tool
Dremel 4000 vs black & decker rt 18ka?
The best??.
Hmmm, that is a good question, Casique. I have never used the Black and Decker tool so I can't really give you an answer. But if you are super serious about power carving I would certainly recommend Dremel. If you only plan on using the tool every once and a while then you should probably go with a cheaper option like Black and Decker.
Thank you for commenting!
- Eli
@@MakerBrain dremel 4000 has 175 watts of power and starts from 5000 to 35,000 rpm. black & decker 125 whatts of power and starts from 0 to 35,000 rpm. I heard that black decker has problems with the flex shaft since it is off center. The technical service informs users that there are no black decker spare parts. I don't know if it's the machine or the people who mistreat it. I need you to give up the machine to use it frequently, taking precaution.
@@MakerBrain I need it for everything. polish bronze and it looks like a mirror. brush metals, drill: glass, crystal, wood, metal. cut iron or aluminum, pipes etc. I read that when putting the flexible shaft the machine loses speed approximately 1500 and 2000 rpm.
Hi Casique, I am not able to make a decision for you, but I have really enjoyed my Dremel and I think that it would be a great opinion for you if you are going to do so much with it. There are some different options from Dremel that might be better for you with a flex shaft. Of course, if you are on a super tight budget then you will have to go with a cheaper brand but they probably won't last you as long.
I wish you the best of luck!
- Eli
@@MakerBrain The machine is more important than the accessories. I buy quality although lately it is not good and even so in this case I am looking for quality. If you ask me, I think that people don't know how to handle a moto tool. Thank you for the information and the time to write to me.
Hi
Hi
Btw that is not and has never been the cheapest rotary tool on Amazon. I’m not sure where you got that info from.
Thank you for noticing that. There are cheaper rotary tools, but this was the cheapest full-size rotary tool at the time of making the video. However, there were a couple other options that were the same price.
@@MakerBrain The one I have came with everything yours has minus a few accessories. but I only paid $20. It's super heavy, has the flex shaft and it's really powerful. I think its currently going for $24. but it has never been $40. But there are quite a bit of full body rotary tools that come with a flex shaft and the other accessories in this kit that are $30 and below. But nonetheless your review of the tool was great. Thanks for sharing.
Hmmm, thank you for letting me know. I should have done a deeper search on Amazon but I am glad you got a good deal on your tool!
Thank you and have a blessed day,
- Eli
Will you stop calling the pink ones tungsten carbide!! Those are for engraving stone,, tungsten carbide are the ones you used on plastic and should be used on metal,, turns it into a mini die grinder
No wonder you can't mill or cut in wood. 😮 You did it in the wrong direction 😅😅 watch the arrow on the machine..
The Dremel 3000 is worthless for me.
Thanks for sharing your thoughts, Jimmy. The 4300 is definitely a much higher quality too, but the truth is that this can do a lot of the same things pretty well.
Have a blessed day,
- Eli