How To Professionally Frame Your Artwork at Home!
HTML-код
- Опубликовано: 30 июл 2024
- Properly framing your photos, posters, and other artwork is more than just putting it in an off-the-shelf frame--there are many tricks that professional frame makers use to keep your precious art pristine and looking great on the wall. Jen walks you through the process of making a custom frame using accessible specialty tools and tips she learned from doing this professionally. It's a process that's both satisfying and could also save you a lot of money!
Tools and materials
Logan Pro Joiner: amzn.to/3fhsuDs
Corner clamps: amzn.to/3oLW2fC
Wood markers: amzn.to/3ufzpRJ
CA glue: amzn.to/3vfJD61
Wood glue: amzn.to/2RyF1cD
Nail Hole and Corner Filler: amzn.to/34f2qT3
Framing point gun + points: amzn.to/2QLO3m5
Acid free foam board: amzn.to/3feHBxt
ATG tape gun: amzn.to/34c42Nk
Acid free backing paper: amzn.to/3oGCTLW
Dust cover trimmer: www.mybinding.com/logan-f60-p...
Framing wire: amzn.to/3fcslkz
D ring hangers: amzn.to/3vhNZcO
Frame bumpers: amzn.to/3fcfuia
Prints shown by: www.secretrisoclub.com/shop and www.ericknightmaps.com/
Shot by Gunther Kirsch and edited by Norman Chan
Join this channel to support Tested and get access to perks:
/ @tested
Tested Ts, stickers, mugs and more: tested-store.com
Subscribe for more videos (and click the bell for notifications): ruclips.net/user/subscription_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Savage Industries T-shirts: cottonbureau.com/stores/savag...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Thanks for watching!
#PictureFraming #HowTo 
Наука
![CENTRAL CEE - GEN Z LUV [VERTICAL VIDEO]](http://i.ytimg.com/vi/VIbidJm9q34/mqdefault.jpg)
Logan Pro Joiner: amzn.to/3fhsuDs
Corner clamps: amzn.to/3oLW2fC
Wood markers: amzn.to/3ufzpRJ
CA glue: amzn.to/3vfJD61
Wood glue: amzn.to/2RyF1cD
Nail Hole and Corner Filler: amzn.to/34f2qT3
Framing point gun + points: amzn.to/2QLO3m5
Acid free foam board: amzn.to/3feHBxt
ATG tape gun: amzn.to/34c42Nk
Acid free backing paper: amzn.to/3oGCTLW
Dust cover trimmer: www.mybinding.com/logan-f60-picture-framing-dust-cover-trimmer.html
Framing wire: amzn.to/3fcslkz
D ring hangers: amzn.to/3vhNZcO
Frame bumpers: amzn.to/3fcfuia
Prints shown by: www.secretrisoclub.com/shop and www.ericknightmaps.com/
Hi were is Adam? , is this Adams daughter?
I love the bird in the window that seems to always make a guest appearance :)
Is it a bird or is it a squirrel or rat?
@@sci_tec I thought it was a jawa for a second when I first noticed it
Team pigeon
Our pigeon neighbors are VERY vocal, but they never complain about our noise or laser cutter fumes, so we live and let live :)
I've always done my own artwork framing and now I see all the things I could improve. Thanks Jen!
Wonderful video. The Logan tool for adding the corner metal supports is a wonderful solution for us home framers! The simple tip of measuring the hanging wire distance to the top edge and noting on the back will save lots of guessing. And the colored wax to mask the miter corners is an eye opener. I hope all DIY framers find this video. You did a great service for us all. Thank you!
Framing is one of the most most valuable skills any artist can have. I worked at a gallery for years doing custom framing. I can’t even calculate how much money I’ve saved being able to do this myself.
I've never actually thought about doing my own frames, but you make it look so easy and good so i will definitely try this myself .. Thank you very much Jen! ❤️.
She came across as a bit racist.. not sure how you can thank her.
Have a blessed day!
-Dean
@@GardenGuy1943 what lmao
I loved this video. I worked as a trim carpenter for many years and my days were spent cutting one miter after another- door frames, base boards, crown moldings,etc. It never occurred to me to paint or color the insides of the miters in order to help hide any ill fitment. That's a great idea and I'm wondering why I never thought of it. But then, that's the reason we watch these videos.....to learn from each other. Thanks again.
Thanks to Jen for a great tutorial!!
This was super informative, thank you! I've wanted to frame a number of things over the years but, never had a few hundred just lying around to have this some day piece framed. Very grateful you shared your knowledge!
This has literally come out right as I’m considering how to frame a bunch of odd-sized embroidery projects, thank you Jen!
Just make sure your embroidery is spaced away from the glass, or it could get damaged over time! Also highly recommend UV glass.
"Not those Beatles. THESE beetles." 😆
This was a really great topic for a video! As a photographer this is gold!
Pro enough for me! Was looking for someone who not only knew what to do, but how to TEACH others! You touched on every possible scenario, and I really appreciate this tutorial! 😉 5⭐
Lots of good tips, Jen, thanks!
I just watched this for the second time, to pick up some more points before planning out a few of my own projects. I'd love to see a followup on this, with more on matting choices, how big a mat border you want, color choices, etc. Cutting special mat boards has let me recycle thrift store frames for art of my choice.
👏👏 awesome tutorial. Thanks for sharing your knowledge and tricks of the trade!
Really top notch video. Thank you for taking the time to make this clear and methodical tutorial!
Nice Vid. I liked seeing all the specialized tools of the trade. And all your tips.
Thank you for the tips i’ve been meaning to frame a painting of mine.
Wonderfully thorough. Thanks so much, Jen!
Very interesting and professional advise I have lots of vintage prints that I have wanted framed but at over a hundred pound a frame you have given me inspiration to give it a go myself
Wow, that was super instructive and interesting. Thank you.
This was very helpful! I have band posters that I wanted to frame for my music room. Great video!
Super video!!! Thank you!!! The visiting pigeon was a great addition... 🙂
This is awesome! I've got a few things that I've long wanted to get matted & framed, but never had the money for it. I think I'll give it a try now, though.
I think one of my favorite things in the video was actually something not even mentioned. The half height shop towels is a brilliant hack. I mainly use them when airbrushing scale model stuff and find the full height towels cumbersome in that capacity. I regularly cut a towel down into strips squares before a project, but it had never occurred to me to just cut the entire roll in half like that. lol I love it!
This wasn’t what I was looking for but stayed for ALL the other information I didn’t realize I needed. I’m impressed!
Learned a lot of things with this video. Will help me to frame my photographs better. Thanks.
I'm a photographer who wants to frame my work, your film is perfect! Really good explanation, thank you so much for sharing!
well done. I liked the marker trick for the "imperfect edges"... also liked your clear succinct explanation of the functional purpose of the mat.
As an artist I want to do my own framing, thanks for this video :)
Nice Video! Very Informative. I really felt like I learned a lot from her. She did a great job!
Thanks! This will definitely help my study room a lot! =)
I'm an amateur wood worker, that wax at the end is totally going to take my stuff to the next level. I think I'll give a frame a shot sometime, there's a lot to know. Awesome video!
The timing of this video is perfect! I need to do this
Beautiful job framing and explaining.
Really easy to follow. Thank you!
Tested covers such a wide variety of information. As she was talking about the pointing gun, it occured to me this is exactly what I've been looking for. I've been restoring an old hutch and cabinets with leaded window panes. They're loose and I've been trying to figure out if I can somehow nail them back into place... Turns out all I need is some framing tools and inspiration. Who could have figured that reinstalling a glass pane is the same as framing a painting... Thanks tested!!
you can get very similar points for the point gun called glaziers points for that purpose. they're shorter to be more hidden as you wont have artwork in the way to hide them.
I'll second the glazers points.
If you only have a few to do (don't have further use for the gun), and the wood isn't too hard, you may also be able to use push points.
Love this! More framing videos!
This looks fun. I may end up getting some tools. Thanks🖼️
Amazing video ❤ thank you for sharing your knowledge with us
Thank you, this is a very informative video!!
I love how I'm not even through the first minute of this video and the first tip is effectively "get a job at a framers, then when you leave rob them blind" I think this is gonna be a great video.
These are all offcut pieces they were getting rid of and practically begged us to take home. Most of them are too short or beat up to use for customer projects, but they work great for small home projects!
@@jenschachter I'm a framer and can vouch for this, I claim all the offcuts and scraps that would otherwise end up in the bin.
🙄 As others note, offcuts means scrap pieces that would be otherwise discarded, not stored.
Thank you for the video! Archival materials make this very professional! Thank you for your video! Very informative!❤❤❤😊
A perfect how-to. Thank you!
Great job thanks for sharing your skills.
🇨🇦/🇺🇸... Hi Jennifer! My artist parents owned a Picture Framing business and Gallery, back in Canada. Seeing as I'm getting closer and closer to retirement (without much of a retirement fund at all... common these days) I've been thinking carefully about a retirement business that I'd ACTUALLY enjoy, rather than my present day job which sucks the life out of me. Because my hobby has always been photography and as I've occasionally done my own framing and have some equipment already, I've been thinking about doing this more seriously as my business. So, I've enjoyed watching your video. It brings back pleasant memories of my parents' business. Thanks!
She's great. More of Jen plz.
Never could get the hang of framing until I saw this video, I just couldn't picture it till now.
Super helpful. Thank you
Man, I'm Shortcut Sam over here! If I even decide to frame my stuff, I just do quick 45s with my chop saw, glue and blast finish nails through the side. Your method is WAY more professional and clean looking. =)
So pleasing and cool artwork :)
Great video. Jen is awesome.
Brilliant video. Thank you!
This is great. I have always wanted to do this but never really knew where to start.
yay perfect timing, im going to frame up a dozen zig saw puzzles for my grandfather before he puts them back in the box. thanks for the tips ajen, massive help
Damn, excited to make custom frames for those prints i can't find the right size for!
When I got my Arkane Studios 20th anniversary poster it was an odd ratio so I had to get a custom frame.
Wish I’d have seen this back then lol.
Very helpful, thanks for posting.
Excellent! Thank you! 🙌
Recently made a really nice free-floating frame from some ancient white oak an elderly neighbor had in their barn. It was a copy of a design I saw in a frame shop I couldn't afford. The design called for a side bevel so I used the table saw with an improvised jig, this put angular pressure on the blade causing the marking to be left. I was okay with the design being rustic this time so I left it. Right now it is just glued together and seems somewhat strong. I likely need to brace the joints further, which is why I came here. I'll likely attempt a bow tie insert (never done one), BUT this tool looks like a MUST HAVE.
Thank you! There were a few things that I was unsure of and your video filled in the missing pieces ! )))
Excellent tutorial. Thanks.
Wow I didn't know professional framer had this much of dedicated tool for they're art. But It makes sense now. +1 for the vids.
Yeah this isn’t the half of it! I have a frame saw (not a mere miter saw) with special blades, a “CNC” matte cutter, a 40X60 heat vacuum press, endless specialty tapes, adhesives, fasteners, papers, tools... I entered the industry a few years back with no idea, but yeah. To say it’s complex is a huge understatement.
Framers are also pushed into the printing business which is an entirely new learning curve and investment in equipment. Printers, scanners, cameras, pc and software, and lessons to make it all calibrated and working right, which all has to have space in your brain next to the knowledge of how to work with anything a person might bring in and put it in a frame without damaging it. Built my first frame in the 2nd grade, still framing at 53, and still learning.
@@kegs357 printing is a fantastic add-on service. We see many things come in that are too risky (or expensive) to restore directly, but a high-res scan with digital touch-ups or even an off-axis photo reproduction can solve many issues. Sometimes it’s safer to frame a touched up reproduction and keep the original in an archival envelope.
Honestly these are tools for hobby framing. Logan makes tools for more the home framer. Hundreds of dollars were spent on the tools in this video. Professional equipment is thousands and thousands of dollars. As an example the joiner used in this video probably sells in the $200 range. A professional v-nailer would cost at least $1500 for a good used one. Just wanted to state the difference. People have no idea how much is invested in a framing business.
Morning jenn you ROCK 💖
Didn’t realize there were so many diverse picture frame tools. My grandfather was a carpenter and my grandmother was a teacher/artist. My grandfather made her artwork frames. From shaping the raw wood to assembling the frame. Instead of v-nails he used Hillman joint fasteners. Interesting side bit of info - his sister was Justin Wilson’s first wife, Lallie.
Great video on framing.❤❤❤❤
Totally awesome sauce! 😄
Hi, nice work your're a great teacher. ❤
Great tutorial
Awesome Monterey Bay picture and frame!
this was really informative, i liked this a lot
How to frame artwork at home like a professional:
First, get a job working for several years to learn how to build frames. Take scrap parts home to collect for years until you have a good stock.
Make sure you have a saw that can be adjusted for exact angle cuts.
If you don't have premade frame scraps from the previous job, you'll need a router to cut the channel for the glass.
Buy a pressing tool to secure the V-nails evenly
A source of compressed air to clean the artwork and plexi or glass before assembling.
This is a great video, and Jen is fantastic as an instructor and going step by step. My issue here is that this is NOT a way to professionally frame artwork at home. This is setting up a professional framing shop, regardless of where you're at. It's like Adam saying "This is a simple process that anyone can do" before proceeding to use his lathe and mill.
Hate to break it to you, but even this setup doesn’t pass the sniff test of a pro framer. The glazing (“glass”) is completely unacceptable, the “acid free” (as opposed to fully archival) material... I won’t even get into the saw, it would get me all twitchy.
the trick to pick up dust, with the scotch tape, was brilliant!
This is a fantastic video
Anyone know if its possible to weld 4 regular poster acrylic covers into one large? Its obviously ill-advised, but I wanted to frame a proper movie poster and the appropriate size is prohibitively expensive.
sneaky Pidgeon cameo at 13:56. Fantastic video. Very informative!
Super informative
Awesome & Thanks :)
Thank you so much for this information. I feel more confident in purchasing the Logan joiner. What do you think of the Logan mat cutter for someone on a budget? Specifically Logan 450-1 Artist Elite?
Thanks!
Hi! I consider buying a point driver for my future framing projects. Is the Logan Point Driver you use in the end of the video powerful enough to use on solid oak?
Look all these tools for building and darn square, I'm mesmerized on how sophisticated this process is drawn out. Industrial Loctite or liquid nails caulking glue will definitely hold. small joint pockets for glue to reservoir would add even more bite. At that point you could add Bisquit joiners for support. As for hiding hardware, you could literally counter sink a screw and use wood filler to cover it up, If you really know what you're doing with an air compressed tack gun and liquid nails this process is finished in under a minute. Frames hang on walls they are not furniture like an Ikea coffee table your son body slams his brother through in the first week.
I've been picture framing for 5 years, some great tips and tricks here. If you wanna streamline, get your artwork mounted up first, then just cut lengths by holding up to the outside and marking the moulding
I do a lot of cheats like this, just off camera ;)
In order to smooth out the brown paper on the back, my mother would spritz it with a fine mist of water and use a heat gun to shrink it.
You can always just learn to put it on straight! I do it from the back by hand, perfect every time.
@@ForestCinema what does that have to do with anything? I said she did that to tension the paper. She always got it on straight.
@@b2gills if your frame is flat and square, and your paper is put on carefully, you shouldn’t need to tension/shrink it beyond what you can do just by hand when attaching the backing.
@@ForestCinema you mean like the video this is a comment on where the backing wasn't tight.
@@b2gills yeah exactly. Simply setting the frame back-down onto paper is asking for wrinkles. You can easily apply the paper to the back of the frame and tension it just by hand to avoid wrinkles. If it still wrinkles that way, it’s a good indication your frame is warped and won’t sit flat on the wall.
Yes! Thank you for this. I do a lot of landscape photography, and the framing is the most expensive part
You know. I didn't actually ask for this, but it's the video we needed :D
Good job! I've been a professional picture framer for 35+ years and I saw only a few things that I would correct on your video, but otherwise you did a great job using hobbiest tools and turning out nice basic frame job. Ps... shop garage sales or offer up type sites for used corner clamps. They are $100 new, so $50 or less is a pretty good deal. You might even find a frame shop that's closing. 😉
I think my main gripes would be the glazing (there’s no excuse to not use UV protective glass,) and the implication that acid-free=good protection. There’s SO MUCH that goes into actually protecting art in a pro framing job beyond just “acid-free,” which is a bit scary. If folks have valuable stuff, it shouldn’t be framed DIY.
this helped
great video. happy international women's month
I am looking for sustainable ways to source my moulding. I want high quality, very basic, and extremely white moulding and maybe some cream colors. Do you know of a good resource?
the logan pro joiner F300-2 is hard to find now, the smaller sibling F300-1 still avialable but it is a one nail a the time machine, instead of 2
Cool
OK, maybe it's because the art I grew up around typically had it, I like seeing little tags with the artpiece and artist names on the bottom member of the frame. You can inexpensively make a passable version of this with a simple labelmaker using the 1/2" wide black print on gold tape, with two lines of print.
Lovely! I'm gonna do it! Thank you! My efficient mind got stuck on that you could've used that brown paper for 2 frames ;P
Good catch! I actually prepped that for a larger frame but ended up demoing the smaller one :)
Please can you list the different tools you used?. Would be helpful for me incase I want to buy them
Great video! Where or where, did you get your t-shirt from? I love it❤
even beyond framing, there was so many helpful tips in this video - i'm embarrassed to say that you blew my mind with measuring the wire distance and writing it on the back to save yourself the trouble when you hang it. i just wing it and poke at it until it sits level-ish to my eye. whoops. saved this for later in multiple sources so i hopefully don't forget
Another thing you can do to help hide potential gaps in corners is to take a marker of the same color (or similar, tend toward darker than lighter) and color the bare wood edge inside where the join is going to be. Won't help with big gaps but small ones or discrepancies in a more detailed molding will be very difficult to see. Obviously don't go too crazy with the marker because it could disrupt the bond of the wood glue if you cover too much.
Yup, this is common practice. If you do your glue right, it’ll take on the art market ink too, and become color-matched glue! This+careful clamping means I never even reach for that stupid filler wax crap.
thx
Hello. What would be Your recommendations when using metal, lets say alluminium