(TCM)Transmission control module repair Ford Fiesta 2011-2018 Ford Focus 2012-2018... 1/3
HTML-код
- Опубликовано: 10 сен 2024
- geni.us/Fp3F0h geni.us/DH5B0tI (Amazon)
Parts:
Soldering Iron Kit: amzn.to/3AvnzbK
amzn.to/40E4QW4
(TCM)Transmission control module repair Ford Fiesta 2011-2018 Ford Focus 2012-2018... 1/3
my face book: / javier.ortiz.5815
my instagram: / javier.ortiz.5815
MY INSTAGRAM: / javier.ortiz.5815
MY FACEBOOK: / javier.ortiz.5815
MY PAYPAL: paypal.me/javier0434
MY CASHAPP: cash.app/$doityourself1234 Хобби
thanks, but bro can you put a battery in the smoke detectors
Bonjour
Good morning friend, thank you for your greetings
Oli
Every model/brand (Ford, Renault, Dacia) that uses this module has the same problems; It gives an error when it warms up. I guess when the module is the same and the problem is the same, the solution will be the same.
can you use a normal soldering gun? im not an electronics guy so i hav not much experience soldering and im scared to short them out.
But i have 2-3 junkyard tcms to experiment on i just wana fix them up incase my car breaks down
This soldering is more efficient, because you have to use the thinnest tip because those ends that you need to soldering are also very thin. Plus you need at least 400 amps of heat for de soldering wire to melt fast enough. Thanks for watching
@@javierortiz1000 thanks alot. I will try opening one of the tcms this weekend
@@javierortiz1000 400 amps will weld very thick steel. I think you meant to say 400 degrees of heat.
Touch the soldering iron to the tip of the pin you will solder and wait. (Let it be 350-400°C.) Touch the thin solder wire to the part you touched the soldering iron to, it will fall to the bottom in the form of a drop. This will create a smooth solder. Use a magnifying glass to see clearly.
Bro use some damn flux u could of done All them solder joints in a minute and looked neat and clean and professional
why you have to be a dck?,,he just showed how to save thousand of dollars and you btch about that,,,i say it for him fk you ungrateful bich,,,,hahahahahahaa
Hello. Do you know something about Dtc P1744 cluch2 problem. I change all mechanical parts. Thanks.
that's a torque converter clutch code. These cars don't have a torque converter..
Qué problema se supone que presentaba el módulo? Se repara, pero cual era el problema?
Reversa, cambios pares
Good
What was the defect in the TCM?
I ask, because I have one here that is without communication, consequently the car does not start.
It was taking longer than usual for the car to get to normal speed
I currently have one also with same issues with yours.. No Cranking Ford Focus.. TCM not Communicating... the Mechanic is saying i need to buy another 1, but seeing this video now is it fixable, or at this stage i have to buy another?
@@SuperMyckie I bought another one and programmed it for the customer.
It is perfect.
I had this issue, the large silver capacitor inside the TCM was bad. This capacitor is in the power circuit, if it fails the TCM doesn't get power so the ECM won't allow the crank signal to the starter relay. replaced the capacitor and problem was solved.
Soldering the pins didn't work for me. There are many videos showing this is the solution, none of them confirm the repair fixed the issue. I spent a full day doing this, complete waste of time. Looking toi convert my focus to manual transmission. The engineers at Ford need to be fired for utter incompetence and Ford should recall every one of these transmissions and replace them free of charge or offer a manual version. Engineers these days are morons, stop trying to be clever ! Even the best engineers screw up trying to be clever, just ask an Audi or Mercedes owner.
😂