Hello Rob, Can you please tell me what the cruise control vacuum line size is? My cruise control doesn't work 1996 2500 5.9L 12v and its an old cracked vacuum line. I don't need the throttle cable that comes from the speed control servo, just the little vacuum line. Thank you sir
I'm doing this for my rig. It'll kill the fuel pump and arm the relay so if you try to start it even by jumping the starter directly it'll honk the horn till its turned oft
The relay I am using is just a normal relay. The difference in a 4 to 5 wire relay is just that one has normally open circuit and one is a normally closed circuit. It’s should work just have to double check the wiring
@renebeckles8288 I think he made a mistake in his wiring diagram, even though he did not make the mistake in his example. 85 needs to be pos switch wire linked to 87 and/or 87a which is pos out, 86 need to be neg, 30 constant pos in that can be turn off to disengage
![Lil Uzi Vert - Chill Bae [Official Music Video]](http://i.ytimg.com/vi/D7F42F_JM3U/mqdefault.jpg)
this is exactly what i need. thanks for sharing
Hello Rob,
Can you please tell me what the cruise control vacuum line size is? My cruise control doesn't work 1996 2500 5.9L 12v and its an old cracked vacuum line. I don't need the throttle cable that comes from the speed control servo, just the little vacuum line. Thank you sir
i believe it's 3/16
@@CUTTERUPROB thank you sir
Can you do this to make a momentary switch a toggle on/off switch?
Yep
@@CUTTERUPROBit would be really useful, have u made a video for this?
I have mine like that, a on/off switch to turn on and a push button to activate my 2 step
I'm doing this for my rig. It'll kill the fuel pump and arm the relay so if you try to start it even by jumping the starter directly it'll honk the horn till its turned oft
Hi where did you get the relay from is it a special relay I tried it with a 5 pin and it didn't work
The relay I am using is just a normal relay. The difference in a 4 to 5 wire relay is just that one has normally open circuit and one is a normally closed circuit. It’s should work just have to double check the wiring
@@CUTTERUPROB ok thank you will try again cause I used 87 and not 87a
@renebeckles8288 I think he made a mistake in his wiring diagram, even though he did not make the mistake in his example.
85 needs to be pos switch wire linked to 87 and/or 87a which is pos out, 86 need to be neg, 30 constant pos in that can be turn off to disengage
I've tried yours and it is working. Thank you.@@samuelolsson6312
@@samuelolsson6312this right here like you say is how i latch for 2 step and disengage when i let the clutch pedal
Can you give me part number to that relay. Self latching
It just a normal 5 terminal relay. You have to wire like I have in the video to my it work that way
I’ve done this with daytime driving lights. When car is on the lights are on.
You don't need the Latching part of this for that.
Just connecting the Relay up 'normally' will do that . . .
👍👍👊