Oil change Husqvarna TE 310 MY 2009

Поделиться
HTML-код
  • Опубликовано: 14 окт 2024
  • Change oil and filter , it is the first time I've done it on the bike so if you have questions / tips as well commented !
    The steps are basically the same as on the other models enduro / cross / up to 510 motard
    NB : I forgot to clean the metal filters on the left side of the crankcase

Комментарии • 14

  • @4sstylz
    @4sstylz Год назад

    Hello,
    I did my oil change but since then, the gearbox is not soft anymore. She is very slow and I have to clutch to operate. Any suggestion ?
    Thank's.

    • @rictiba
      @rictiba  Год назад

      Hello, did you changed viscosity or brand of oil?

    • @4sstylz
      @4sstylz Год назад

      @@rictiba Hello,
      I don't know since I got the bike with fresh oil but apperently it was 10w50 motul 5100 as the manual suggest.
      I finally have an idea of the issue : My gear selector screw is not well engaged. But I can't torque the screw ! The gear selector is still moving even after changing the selector by a replacement part, and changing the screw.
      I have removed the chain to access to the screw, but with my little eye wrench.
      Even badly torqued, the feeling is a bit better now.

  • @vittorionardi7400
    @vittorionardi7400 4 года назад

    Bel video! Hi acquistato da poco anch'io la stessa moto usata. Sapresti dirmi se la moto monta di serie la ventola di raffreddamento? Perché nella mia non c'è

    • @rictiba
      @rictiba  4 года назад

      Ciao! La mia la montava già quando l'ho comprata e la monta di serie, e te lo dico sicuro al 100% perché lavoro in una concessionaria moto e ho appena controllato sul catalogo

  • @pietroni4438
    @pietroni4438 9 лет назад

    Ciao, io ho un 310 del 2012 ma non trovo il tappo per l'evacuazione degli olii esausti, sai per caso dove potrebbe essere situato?

    • @rictiba
      @rictiba  9 лет назад

      NoRosik Reaper beh dovrebbe essere nello stesso punto o lì vicino sotto al blocco..in altri punti non verrebbe giù l'olio ;)

    • @pietroni4438
      @pietroni4438 9 лет назад

      Grazie :)

  • @frahsq510
    @frahsq510 2 года назад

    Io ho un 510, ma a che altezza deve stare il livello olio dall'oblò a moto dritta?

    • @rictiba
      @rictiba  2 года назад +1

      Ciao, se non ci sono tacche sull'oblò basta che stia sotto il bordo superiore e va bene

    • @frahsq510
      @frahsq510 2 года назад

      @@rictiba grazie, le avevo cercate dal lato sbagliato: verso il carter invece stanno verso avanti ed essendo veramente sottili e con un pò di sporco non si vedevano

  • @2wheelLove
    @2wheelLove 9 лет назад +3

    you forgot to flush out the two oil screens on the left side of the bike.....BTW this music is horrible...

    • @rictiba
      @rictiba  9 лет назад

      Yes I didn't know there were other 2 iron filters on the left before the video and so I forgot them