Does water cleanse intake valve of Direct/Indirect injection engine without REMOVING anything
HTML-код
- Опубликовано: 25 окт 2020
- #alimech #carbon #intakevalve #water
Teslong Endoscope Camera: s.click.aliexpress.com/e/_Dm5...
Even this is indirect injection engine, but still too much carbon buildup on the intake valve building up because, i drive the car aggressively sometime and the oil vapor passing from PCV valve to intake throttle
this is a very common problem with indirect fuel injectors, because the fuel injectors located on top of the piston meaning the fuel injectors no longer washing the intake valves
in this video we will answer (Does water cleanse intake valve of Direct/Indirect injection engine without REMOVING anything?) and i will show the process of intake valve cleaning without using special tool in another meaning: decarbonizing your engine with water
problems with direct injection engines
1. Rough ruining
2. Hard starting
3. Poor fuel economy
4. Loss of power
5. Misfiring
Watch next 👇👇
Intake valve cleaning with carb cleaner: • How to clean intake va...
FUEL INJECTOR CLEANING Challenge: • FUEL INJECTOR CLEANING...
Does seafoam actually work?: • How to clean carbon bu...
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon M50: amzn.to/2PXVVwO
Dji Ronin sc Staiblizer: amzn.to/3iIqxPc
BOYA Microphone: amzn.to/320Oydx
gopro hero 8: amzn.to/3g8BKH3
Gopro Max 360: amzn.to/345NNTf
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh 
Авто/Мото
Havent watched the whole video, but oil and filter change after this is a must. Universal oil spray in the intake after water cleaning is recommended before shutdown as well.
Nice video bro!!!! I love it. Hugs from Brazil
🇧🇷🇧🇷 thanks ✌
Nice job once again, like the carb cleaner better as well👍🏻
Thanks for turning in 🙏🏻
Nice videos good job
Why dont you use ac delco cleaning spray to see how it works on removing the carbon from the valves but you should spray it directly on the area that you want and leave it for a couple of minutes
waterinjection can get great results in terms of lowering cilindertemprature and gaining horsepower ... a disclaimer tough the amount of water injected needs to be fine tuned and controlled for abvious reasons .... olso your are diluting your engineoil ... the blowby gasses are going to add steam to the crankcase .. if the percentage is high enough severe bearingdamage will occur . also water intering the combustionchamber is going to alter to compressionratio and push engineparts way beyond their designed stresslevels ...
its so much more than just ading it and hoping for the best
Awesome short and sweet video
Glad you enjoyed it
Could you do this same procedure with lacquer thinner, Techron, or another hydrocarbon liquid cleaner? I was going to attempt a pressurized set up to the fuel line, but this seems easier. Does this clean piston rings and the holes in the ring groove of the piston? Thanks
Yes, absolutely, i will do it, if you watched my last video, i will clean the rest of the carbon with liqueur thinner
As always, you amazed me one more time!! brother will the same process work on a diesel car?? if possible can you please make a video by using hot steam for valves cleaning?? Thankyou.. God bless you!!
Thanks man, I will do that one too, in my future videos
mass before reaction and mass after reaction the same. Water?
Hello boss this is tha right way cleaning
There are so many ways I did on my channel, it's up to you which one you have to use from the products I used
What is the proper dose of water for cleaning?
شنو اسم الماده يمعودين
How did the carbon get past the cat?
Water cleans the combustion chamber. Like a leaky head gasket.
I was wondering if i did this on my diesel is there a chance i could clog the dpf with any carbon that might come away
U can burn the carbon by going on the highway. It is meant to stay in rhe dpf
good video
🙏🙏
Do you replace gasket everytime you remove intake manifold?
It's good practice to replace any gasket that's been disturbed, but if it looks to be the rubber o-ring style which can be reused.
Good luck
I highly recommend you to use carb cleaner instead of using water due to corrosion ..there is a lot of special material in market that is made for avoiding and cleaning carbon consumption on valves and other car parts
Yes I agree with you, even the Carb cleaner worked better, but this was recommended buy one of my subscribers, that's why I wanted to see how it works
Water/methanol mix ? I’m researching this as a permanent and continuous system that will clean the valves with every rpm the engine turns
Depends on the engine, been running this method for 20 years once the engine is warmed up and specially freeway running without issues as long as you turn off water injection manually a minute before stopping even your exhaust last longer without soot build up.
Hello my friend, I would like to know the best way to remove carbon deposits from the valve. And what do you think about brake fluid in descaling?
The best way I did was with carb cleaner like this ruclips.net/video/ljQlugKM9P0/видео.html
@@AliMECH What do you think about acdelco product and thanks
I only used transmission fluid, it was good but not their other products
Is teinerpaint or no
subscribed
Thanks
Is this for directed injected engines or gdi only
It will work on any engine its just that direct injection/gdi suffers more from carbon buildup on the valves due to the fuel not cleaning the top of the valves so its less of an issue on port injected engines
Why not just pass the PCV gas and sludge through a catch can and filtration system prior to it being chucked back into your engine?
Methanol intake cleaning
Your idea is good but too fast, maybe use less water and over a much longer time. You only need a little steam over many kms to slowly remove the buildup. Water should be half the petrol spray volume. Also try 20% metholated spirits (ethanol) in the water. This little steam will gently clean the petrol engine combustion chambers too.
works for rotaries a treat, manual switch after warmed up my original 12a and 13b lived double the lives of others
Methanol based windscreen washer fluid in the mix, a little bit.
In order the really clean the valves you would likely need to slowly run gallons of water through the engine .
Can you do this through brake booster vacuum hose to intake?
Yes, you can
Try it alcohol or ethanol and see what it does.
Hello my friends
What is the liquid name because my English-language no good
Thanks of you
It was water
Thank you
why after pcv?
Because after pvc it enters intake manifold
Use vinegar 10% + water 40% inject in engine
Just put an oil catch can on your car, simple!
Water dont compress. Unlike gas which can be compress, water is not.
Never use water inside combustion chamber, it will knock your engine and bend your connecting rod
So as the fuel if u say so, but let's think right, the water not fill the cylinder completely so there will be no room for compression, the amount that goes in is drops and after the intake it will be vipor,
Water will destroy engine by HYDRALOCK.
It will if you drive through the river! 🤷🏼♂️
Here he’s using a tiny amount of water!
Yes, exactly
@@AliMECH I used to do this same method on a car I had in the late 70’s/early 80’s, it basically steam cleans 👍🏼
I did with steam as well on one of my videos, I had good results
Will stall way before than that, unless you pour water from a bucket at full steam.