Fabricmate® - How To Install Max-Line® 2 inch+ Top Load Acoustical Fabric Wall Finishing System
HTML-код
- Опубликовано: 21 июл 2021
- This video shows you how easy it is to install Fabricmate's Max-Line® 2"+ top/front loading acoustical fabric wall finishing system on drywall. Max-Line® offers best-in-class acoustics for Home Theaters, Recording Studios, Auditoriums, Music Halls and any room where acoustical wall panels are needed to reduce room noise and reverberations. It's 2" thick profile allows you to install thicker acoustic backings for maximum acoustical performance in any room.
Хобби
What is the maximum or minimum fabric should remain after trimming before the last tuck?
We generally recommend leaving 1/2" to 3/4" of fabric remaining before final tuck/roll in. Would love to see a picture of your installation!
@@Fabricmate Thank you for replying. I’m actually in the planning stages of building my very first dedicated home theater and of course planned on buying fabric and tracks from you guys. I will send a picture for sure after it’s all completed with a before, after. I did however bought some fabric many years ago from you for some DIY acoustic panels.
Do the screws need to go into studs, or will it hold just in the drywall? Thanks
Hi Mark. Thank you for your inquiry. The coarse drywall screws included with the Max-Line system do not need to go into the studs. Just insert them into the pre-drilled pocket holes and screw them directly into the drywall and they should hold just fine. As shown in the video you can also use construction adhesive in addition to the screws if desired.
@@Fabricmate thanks so much for the reply. So you include the screws? that would be great. I hadn't understood that on the website. Fantastic. Thank you!
@@markholding3954 You're most welcome Mark. If you have any additional questions, please call us at 1-866-622-2996 and press 1 for Sales & Technical Support.