Zach, at 3:48-3:52 you used an unusual but obviously effective hose plier tool--never seen one before. Can you let us know what brand/model that is? And, is the proper name, "hose pliers"? HAHA! Thanks---I've got a 2015 R1 about to install the same Brembo MC as you did here...
Sorry maybe this was addressed before ( I didn't watch part one yet ) but why change braided lines for kevlar lines? They pretty much have the same heat/expansion qualities and my team mechanic told me they won't add much more then the ones already there besides the extra cost and looks. Are you guy's using a RCS19 master and are you going to use the Brembo rear reservoir delete kit? So if Zack or you have the info I would like to know I'm curious :) bike is looking good
How much less lever travel do you guys get with the RCS19? The stock nissin on my CBR1k has like 25mm of travel before it starts to bite, non-abs, fresh Motul RBF600, and no air whatsoever in the system. When the brakes get some heat in them it gets even worse and sometimes won’t get better until bled. I am looking for a more instant/stiff lever pull so it’s more linear and less like an on/off switch. Will this master help get the feel I’m describing?
I'm curious if between your own R1 and this build series R1 do you now have 2 sets of factory blue wheels laying around? If so, are you going to sell them? I think they'd look good on my Raven 2015 R1.
Hey Rob. The stock wheels from my 2015 R1M are bent from hitting a pothole. The stock wheels from the 2018 were sent back to MotoMillion in exchange for the carbon fiber wheels. Sorry
why do you use rsc19 and not rcs17? the pistons diameter of the m4 calipers are 30mm. so brembo say if yo drive the m4 or m50 or if your pistons are smaller than 30mm so use rsc17 if they are bigger than 30 so use 19. hope I could help. btw love your videos!
Loved the video and as always Zack is a master. I tried to follow Zack's procedure intensely so that I can commit it and perform it on my bike, but I have to be the party downer on this site and say that the music is very much distracting. Hey...hey...hey...hey can really get old and tiresome after awhile.
What hose do you use from the reservoir to the brembo master cylinder? Thanks!
That's the first liter bike I will be getting. She's looking very nice! Keep it up!
The bike looks great and your video editing skills are on point! I really like the sound track.
Awesome sauce the beast is coming together well Zack is rocking it with mad wrenching skills👍👍👍👍👍
instaBlaster
Number 1 motovlogger and mechanic. I love these build series,you just keep doing what you like.and never do xdiavel
Good job Zack, nice bike 👍
Coming along nicely.
You people 😲 !!! Kidding
2weeks ago wtf
@@laksvlogs7151 Patreon
Zach, at 3:48-3:52 you used an unusual but obviously effective hose plier tool--never seen one before. Can you let us know what brand/model that is? And, is the proper name, "hose pliers"? HAHA! Thanks---I've got a 2015 R1 about to install the same Brembo MC as you did here...
Absolute dream bike! 🤞🤞
Thanks!
Really good I'm always amazed with ur video I love that
Thanks!
Sorry maybe this was addressed before ( I didn't watch part one yet ) but why change braided lines for kevlar lines? They pretty much have the same heat/expansion qualities and my team mechanic told me they won't add much more then the ones already there besides the extra cost and looks. Are you guy's using a RCS19 master and are you going to use the Brembo rear reservoir delete kit?
So if Zack or you have the info I would like to know I'm curious :)
bike is looking good
She beautiful with the brembos 🔥
Music in the background I like.
I like this content so much
Will you do a review on a z1000SE?
Did you use Motul high temp brake fluid since you have the high end braking system just curious? I use it on the track.
Where is ZAck located and whats the name of the shop, I'd like to have this Master Cylinder installed and no one can seem to do it
How much less lever travel do you guys get with the RCS19? The stock nissin on my CBR1k has like 25mm of travel before it starts to bite, non-abs, fresh Motul RBF600, and no air whatsoever in the system. When the brakes get some heat in them it gets even worse and sometimes won’t get better until bled. I am looking for a more instant/stiff lever pull so it’s more linear and less like an on/off switch. Will this master help get the feel I’m describing?
how did you attached the front master hose ?
I'm curious if between your own R1 and this build series R1 do you now have 2 sets of factory blue wheels laying around? If so, are you going to sell them? I think they'd look good on my Raven 2015 R1.
Hey Rob. The stock wheels from my 2015 R1M are bent from hitting a pothole. The stock wheels from the 2018 were sent back to MotoMillion in exchange for the carbon fiber wheels. Sorry
Nice job bike more update it's really remarkable
Good job 👏🏻 guys she is looking beautiful 👍🏻👍🏻😎🏝🌴
When is this bike supposed to be done?
March...
@@650ib awesome
650 when is the new video for today going to come out
Hey... Just wrapping it up. Coming out in an hour or so.
enjoyed the video!
00:36 You people?, What do you mean, you people?
Very informative👍🏽👍🏽
Lawnmower dude doing it well wrenching in background where's grumpy cat😊😊😊😊
The 12 minutes video went in 2 minutes bro nice watch it 👍🏻👍🏻
why do you use rsc19 and not rcs17? the pistons diameter of the m4 calipers are 30mm. so brembo say if yo drive the m4 or m50 or if your pistons are smaller than 30mm so use rsc17 if they are bigger than 30 so use 19. hope I could help. btw love your videos!
Nice music👍👍👍👍
Loved the video and as always Zack is a master. I tried to follow Zack's procedure intensely so that I can commit it and perform it on my bike, but I have to be the party downer on this site and say that the music is very much distracting. Hey...hey...hey...hey can really get old and tiresome after awhile.
Kapan selesai nya motor ini?
Hi ib! next build series how about you do ktm rc390 or R3?
R3 coming soon
Hi IB what is yor Height u look so tall ?'
wow
What do you mean “you people”?🤣🤣🤣
Is it only me that's kinda triggered the brembo badge on the clap at the clip on is upside down
😱
IS IT WEDNESDAY?
Yes, new video coming in an hour
@@650ib More tomorrow??
Whaaaaaaaat!!!!!
Rev to 200.000 subscriber Mr
Some quality pieces you have on this bike. I was looking at these pieces for my monster and they'd be easily 2k for the brembo calipers and mastee
U need a turbo busa
650 I thought the video would be out in an hour it's been a couple hours what's up
I had some issues with rendering the video. 😭 Trying it again.... 1hr
Hey 650i can we win your bike in Pakistan?
Frm svrl months.... 650ib... Is jst making n abgrading.... D bikes BT no smkedowm.... Loll...