I normally do 500+ kms tours (one way) on my RR310, would love to see a clipon riser installation video someday :D That would ease up my life a lot with me being 5'6" :P
@@Athul8055 nop , this one doesn't, this is 2nd quality item , it gives less barking feedback than the stock one , buy RCB it will actually give you very good braking
Replica doesn't mean shit. If you look at the attention to details of the product, it's actually made with care. Lots of people are using it without any problem. Who knows the original product is this but they are just charging high calling it original. Just my thought.
Awesome video. You made it look so easy and smooth. And to people who says that don't risk your life by using copy product just to let you guys know it's all about branding and advertisement that make the brand expensive. For example Bata shoes are more reliable than that of Adidas.
@@vishalahinave I have seen some reviews over the internet that say that these levers foul with the front visor or fairing during full turn angle. Is it the case with RR310 as well?
Hi can i just use the stock master cylinder on this kit ??? i love the design but do not want to mess up my setup 😅😅😅 owner since 5 years and i dont want to mess up my bike
I want to lower the clip-on's on my rr 310 the stock clip-on is cannot be lowered to an extend. Can you suggest me an after market clip-on system that would does the job?
Please dont buy if now if u use bs6 rr310 because the clutch wont fit in your bike and the ems sensore will show an error code as well as ecu will start to show error code and your gtt will turn off and clutch will start to act funny and the clutch sensor is not there in the kit that you recieve and you will have to bypass the clutch sensor which inturn will void you warrenty if u cut the sensor off so please dont use the clutch it wont go with the bike
I normally do 500+ kms tours (one way) on my RR310, would love to see a clipon riser installation video someday :D
That would ease up my life a lot with me being 5'6" :P
Looks more sporty and dynamic💥
Video is pure Satisfaction ❤
Personally loved the old setup and this won't increase performance it's only a visual change you should have lived with the old one
Not actually. Radial brakes can improve brake feel and make you more confident
@@Athul8055 nop , this one doesn't, this is 2nd quality item , it gives less barking feedback than the stock one , buy RCB it will actually give you very good braking
@@the__sonic_boom5028 yeah you should buy best quality product instead of second quality.
Bro one thing I want to say don't use and risk urelf with duplicate or replica or first copy company. Breaks are the most important for bikes🙏
Replica doesn't mean shit. If you look at the attention to details of the product, it's actually made with care. Lots of people are using it without any problem.
Who knows the original product is this but they are just charging high calling it original. Just my thought.
@@fanaticcoder3320 i never said it is"shit", i mean be careful with replica tats its
One of the most awaited video
The quality of your content is top notch
Love from KOTA RAJASTHAN ❤
You made it look so simple brother ❤️❤️
Does this really improve the breaking. Or just for the looks
no crush washers on the bango bolt and the hose clamps are in the wrong spot i hope you fixed that later
Awesome video. You made it look so easy and smooth. And to people who says that don't risk your life by using copy product just to let you guys know it's all about branding and advertisement that make the brand expensive. For example Bata shoes are more reliable than that of Adidas.
Bata is more reliable than adidas😐
Fan from Dubai bro
Any issues are you facing are it’s still good?
perfect installation thank you❤️
Which one do you prefer though? your earlier adjustable levers or this one? I am tired of searching for a good adjustable lever for my RR310 BS6...
My old one is still working, so you can choose between any of one of these 2.
@@vishalahinave I have seen some reviews over the internet that say that these levers foul with the front visor or fairing during full turn angle. Is it the case with RR310 as well?
Hi, were you able to find a good clutch and brake lever for your bike? I am also looking for them
Amazing piece of art. 😍
Thanks for detail fixing ❤️
Hi can i just use the stock master cylinder on this kit ??? i love the design but do not want to mess up my setup 😅😅😅 owner since 5 years and i dont want to mess up my bike
Does it fits for scootys?such as ntroq or activa
Can it increase breaking power ??
crush washers would of been a good idea you think !
Ek video rr310 k leya konsa racing ecu sahi reha ga uspay bhe bana do , ek bhe video nhi hai yt pa
How is the long term review.
How many days to dilver
This is certainly a 1st copy... But can we install this on gixxer sf new model?
Yes you can install
Hey bro, I'm planning to get it on my r15 v4. How's the performance of the brake? Any issues or such? Please do respond
Performance is good still its on the bike, no issues till now
14 or 17mm
Is this work better than stock. Please let me know
No
You could have gone with RCB radial cylinder....
It would have given a braking performance boost....
And are these original??
Yeah right dude, this is duplicate, rcb is some 3k extra but gives good feedback
Quality content..❤
The product no doubt will be good. After all brembo ! This is single hydraulic lever set right sir ?
Yes single
Its not genuine brembo 😂
@@ketankadam5669 correct
@@ketankadam5669 original brembo rcs 19 is about 20000rs or higher it really expensive
@@ramchhanazote9255rcb is almost of same quality as of brembo better go for that.
Can we install mirrors on it for naked bikes?
Only on clutch side
Did you get tracking Id when buying from the sky boys shop?
Hey, I have the same question. Did u get delivered?
will you please sell your old leaver pair , if both are completely ok.
Looking very good..
Bro is it possible to put hydraulic brakes and clutch at the same time
Yes it's possible
Hi, Do you have video installation for the hydraulic clutch version on the RR 310? Thanks.
No
Bhai jaruri ka installation ye nahi karte. Bas Jo accha hai usi me paisa aur time barbad karte rahte hain.
Bhai kaya a Apache 160 4v may set hoga?? Plz ans me🙏
Yes
Hey bro which camera are you using for your youtube videos?
I use canon 200d with 18-55 & 50 mm lenses
in which part do you live in India.Police kuch nhi bolti kya vha exaust pae??merko to roj rukwa lete h :(
Bro what about hydraulic clutch system???
There is one more varient in this kit where you get hydraulic clutch and brake.
Is it worth installing it???
Yes
How to purchase it
I want to lower the clip-on's on my rr 310 the stock clip-on is cannot be lowered to an extend. Can you suggest me an after market clip-on system that would does the job?
I will check and tell you soon
@@vishalahinave that would be very helpful.. and there are lot of members in our clan that are want to do the same.
@@vishalahinave pls tell
Is it worth the money ??
Bro I want to this for R15 v3
But I have doubt
That is not performed well
Its yes worth, I'm still using.
@@vishalahinave
Any performance issue you faced ? Or any issues
What is the cost of it?
Bro,what's the price for front master cylinder.
How much is it?
Does the hydraulic clutch come with the slave cylinder?
Yes
How did you mount that phone holder there?
ruclips.net/video/tQigI8W_R3I/видео.html
Price
How is the brake performance after installing this hidrolic brake?
And total price?
Braking is good, check description for product link
Bro is this single hydraulic or double?
Single
And bro can i trust skyboyshop?
Yes
Can this be installed for Yamaha R3?
yes
Bhi price kitna hai
Can we install this on 220?
Yes you can
will you please sell your old leaver pair , if both are completely ok.>>>>>>????????????
I'm keeping it for my other bike
@@vishalahinave okay
Bro send me link to busy this
Bro install a dual hydraulic cylinder break and cluch livars
Y there is no oil reservoir for clutch bro ??
Because it's single hydraulic not double
Kdk 🔥
Bhai is this site legit? I have ordered some and doesn't have shipment tracing
Did You reseive your products, bro?
@@k1ngslayer446 yes i did and i have qlso made a video on my channel
Now feel like a super car
No crush washers for the banjo bolt and u didn’t bleed the calipers😑 please don’t risk your life
Vedio Starts : Flowing Hand Apears
Along with the product
@@vishalahinave 😆🙏
Is it compatible with BMW G310R bs6 variant ?
Yes
@@vishalahinave is there place to attach the stock rear view mirrors on the lever?
Mirror mount is only on clutch side
It's not original one. And it's something replica
Don't risk your life by going for fake brembo products
Well said brother, brakes are really important and messing around with it can have wrong outcomes.
Highter back seat as Yamaha 152.0 jesa
old levers ka kya karo ge bro If u want to Sell Then msg me. Im ur old subscriber 😎
Using on my other bike
Please dont buy if now if u use bs6 rr310 because the clutch wont fit in your bike and the ems sensore will show an error code as well as ecu will start to show error code and your gtt will turn off and clutch will start to act funny and the clutch sensor is not there in the kit that you recieve and you will have to bypass the clutch sensor which inturn will void you warrenty if u cut the sensor off so please dont use the clutch it wont go with the bike
Bro first view 😘😘😘
Brembo copy products 🙄🙄🙄. Not original 🙏
But the clutch lever is not that gud bro. No quality
Sidhi baat jo bakwas... 👍
Price
Price