How to Replace Spark Plugs 02-06 Nissan Altima 2.5L
HTML-код
- Опубликовано: 4 сен 2024
- Buy Now!
New Spark Plug Set from 1AAuto.com 1aau.to/ia/NGET...
1A Auto shows you how to repair, install, fix, change or replace rusted, corroded, or stuck spark plugs. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima
This process should be similar on the following vehicles:
2002 Nissan Altima
2003 Nissan Altima
2004 Nissan Altima
2005 Nissan Altima
2006 Nissan Altima
🔧 List of tools used:
• 10mm Socket 1aau.to/ocw/1AX...
• 5/8 Inch Spark Plug Socket
• Ratchet 1aau.to/odD/1AX...
• Socket Extensions 1aau.to/oc5/1AX...
• Torque Wrench 1aau.to/obK/1AX...
• 5mm Hex Wrench
Subscribe: / @1aauto
Check out our playlist:
Nissan Altima 2002-2006 3rd gen: • Nissan Altima 2002-200...
For More Info visit us at 1aau.to/h/eh/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You guys make working on cars look simple easy and fun to do. 😂😂😂
2-3 weeks for a mechanic, $130 nd hour.. I don't do car stuff but this looked like even I could
do it. And I'm cheap. Car running rough. Auto Zone test said plugs and coils. Got them 40 minutes later-
2006 running smooth again. Great video! Short and sweet with everything I needed! THANK YOU !
+Steve Orc Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thanks to you bro, I don't have to spend a couple hundred dollars to pay mechanic to do it. Just a note, you could have mentioned to check the gap on the spark plugs and show them how to do it because, 75% of spark plugs you buy are not gapped correctly. One hell of a video bro. Kudos
Ok...I'm a dumb girl, and you made this look so easy I might even attempt to do mine! 😆. Wish me luck! (and thanks! 😘✌️)
I have an 2003 Altima, but with the 3.5 instead. Could you guys do a video on the 3.5 next? I haven't found anyone as thorough and as good at explaining things as you guys and would appreciate the guidance.
+Sawyer Clegg We'll keep this request in mind for a future video! 1AAuto.com
I’m going try and attempt this “tomorrow”
Thank you so much 🥰
You guys always have good videos. I did my valve cover and gasket from after watching your video back in quarantine and I just did one spark plug for the first time, took probably 5 minutes, very easy
Thank you. Very educational and straightforward.
I actually changed my spark plugs before on my 2005 Altima. I ended up having my Allen head screws strip on my engine cover. I ended up replacing them with bolt head screws
C. C. Lol I all of my Allen key bolts stripped so I just took a hammer and smashed the cover off. No need to even deal with it anymore
Can you please make a video on how to change injectors for Altima 02-06. Cant find any video online and I don't want to pay hundreds to replace them. :(
We're always cycling through cars filming hundreds of common repairs for common vehicles every month. We'll add this to our list of repairs to film. Check back again and hopefully we'll have it soon. +Sharan Banik
Simply, easy. Thanks for the tutorial.
A careful cleaning of those plugs and re-gapping would have likely been all that was needed. They appear to be Platinum electrodes and quite pricey. Good video.
Can I just use a normal wrench? I don’t have a torque ranch
You can, just don’t over tighten it. Tighten to a nice sturdy feel. Don’t over exert, or you will strip the thread.
First time I am critiquing this site...should always check gap, though they say plugs come pregapped, I have found enough in my years that were off. A DAB of antiseize for aluminum heads is probably a good practice and finally dielectric grease is always a good idea on ignition coil boots and electrical plug.
+Roy Quesada Thanks for the tip! We'll pass this info along to our production team.
I have never torqued my spark plugs, just tightened until snug. I asked my dad and he was like, “No. Don’t torque them.” Now I’m confused 😂
Same😂😂😂
Can I ask you a question bro? I've seen a 2006 Nissan Altima, the same one you are working on for $4,000 but it has 94,000 miles on it. That car is 17 years old and I am skeptical about the mileage. Even though it has a digital odometer can they roll it back? Thank you.
Please help! First off thanks for the vids. Just changed my spark plugs but now am.worried i may have overtightened one plug ( torque wrench wasnt on lock position so.i kept turning till i realized) now either the plug socket wont grip or the socket is spinning freely.. Also when i tried to put ignition coil back on the spark plug it did not want to insert so i screwed down the igniton coil hoping itd slowly make its way in.. Started up just fine but im wondering what could this cause.. And how could i get my plug out.. Ill be buying a magnetic plug socket and see if that works but should i be driving like this?
Did your car end up fine?
If the car seems to be running fine,then yes,that's okay to drive it like.althought, the plug in question should be addressed sooner than later.
Ok, so I performed this process today, and when I removed the ignition coil, the channel was full of oil. Is this normal? I noticed your was dry.
Not normal. Change valve cover.
The rubber seals on the valve cover may be warned out from normal use causing a bit of oil to slip in those spark plug wells. I recommend to get a new valve cover. Make sure to remove as much oil as you can before you remove the spark plugs. You wouldn’t want any oil to get into the cylinders.
I have had to replace my sparks plugs numerous times and every time they have gas on them. What is the problem and how do I solve it?
There could be many reasons why you are experiencing this issue. We suggest taking your vehicle to a local reputable mechanic to accurately diagnose your vehicle. Thank you for watching our video! +Kent Jackson - RMB
No gap check needed?
They come pre-gapped
What about the gaping of the sparkplug?
Thanks for sharing. Got any plug gap specs handy? - take care
Thanks again for your help!
THANK YOU 🙏🏼
Two of my bolts are just spinning can’t get them out to replace the spark plugs
I notice you guys did not gap them.
Did my spark plugs on my own first time, I did everything on video but when I started my car it started to smoke under the engine between engine and fan relay what did I do wrong
+Kayla Saucedo We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Did you figure out what the problem was? Did you look down the spark plug tube first to see if any oil was in there? If oil was in there and it ran into the cylinder it would burn off and could get nasty
Do you have to put some type of grease or balm on the spark plugs or the coils?
Antiseize
It's just to make sure the next time you have to change your spark plugs it's easier to get it out
What size are the coil bolts
Is there a certain order that the coils must be in or can you just put them in any hole
You definitely can't interchange them, because there is timing circuitry that ensures that fire in the right order. That's all I know though.
after i did this my car jerks pretty bad any suggestions?
+KeynotePlays We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
i have 2002 nissan altmia 2.5se that is shaking very bad as i drive and it has a check engine light on. when i took it to autozone it gives Error code P0300 Random missfire and P0733 Gear 3 incorrect Ratio. what should i do? Thank you
Don’t you have to unplug the battery
+Jesse Contreras Thanks for watching! You do not need to disconnect the batter when performing this repair. 1aauto.com
You don't have to disconnect because he disconnected the coils 😏
Now if he hadn't disconnected from the coil he would've wished he had im sure lol
torc at 17, pounds or inches?
Centimeters
I did it, the hardest part was loosing them...
You didn’t need to gap your spark plugs sir??
Some come pre gapped
Easy enough.... Its only a matter of having those tools i can do it by myself i don't need a man for this.....
That's the reason I'm here
Exactly, I'll save myself $300 and replace these and my ignition coils myself. Love these videos.
No lube on the spark plugs?
+Salvador Moran Thanks for watching! Many spark plug manufacturers do not recommend putting anti-seize on the threads, as it will change the torque specifications when installing. This can cause you to over-torque them, thus breaking the threads. 1aauto.com
Can you show us where on the boxes of spark plugs it shows that? A small dab would probably change the torque value within the +/- tolerance of a pound.
How do you know if you need new coils?
I had to replace one. It was in pieces..