88 MPH DeLorean Kart Build Pt.1 | Vintage Go Kart Chassis

Поделиться
HTML-код
  • Опубликовано: 22 май 2018
  • Our drag rail is on hold until we get new flywheel magnets, so we're starting a new project! Inspired by the time traveling DeLorean DMC-12 from Back to the Future, we're building an American Express 2.0 chassis with a 20+ horsepower build Predator 212cc engine in hopes of hitting 88 miles an hour.
    In this video, we prep and paint our chassis to achieve the stainless steel look of the DeLorean, and assemble the front end of the American Express 2.0 go kart kit.
    Thanks for Watching!
    Facebook: goo.gl/VR6mh2
    Instagram: bit.ly/3T8njaF
    Bare frame: goo.gl/7NuZ6Z
    Standard kart kit: goo.gl/5TQvzy
    Off road kit: goo.gl/GGuZLC
    Go Power Sports: bit.ly/3QKyODE
    NEW MERCH: www.cars-cameras.com/
    Equipment we use: www.amazon.com/shop/carsandca...
    The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
    Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
  • Авто/МотоАвто/Мото

Комментарии • 951

  • @RunItBackGunz
    @RunItBackGunz 5 лет назад +484

    Y’all literally inspire me to become a engineer and build my own cars / go karts

  • @brodygoodrich926
    @brodygoodrich926 4 года назад +37

    Isn’t it sad how a 212cc tiny little motor can go 88mph but a real DeLorean with a v6 can barely even go 88mph

    • @jedishinobi9399
      @jedishinobi9399 6 месяцев назад +3

      Not to state the obvious but there is a thing called power to weight ratio, so yeah of course it's faster.

    • @lolstans285
      @lolstans285 3 месяца назад +1

      The reason is because of emission standards at the time, the nation speed limit was 55 mph so there really wasn’t a need to make a car that needed to go any faster

    • @Rokinbokinstudios
      @Rokinbokinstudios 2 месяца назад

      The DMC-12 non federally tuned (European version) could do like 120 mph

    • @javiermartinez6295
      @javiermartinez6295 2 месяца назад

      Power weight ratios

  • @possibleproblem479
    @possibleproblem479 3 года назад +28

    found this channel when I was 10. I’m 16 now and building my first go cart

  • @CarsandCameras
    @CarsandCameras  6 лет назад +278

    We hit 73 mph on a go kart... why not 88?? Maybe we'll travel through time!

  • @alexsprings87
    @alexsprings87 6 лет назад +163

    I've been subscribed since the beginning. Yall have managed to not only survive in the RUclips world, but thrive!! Keep putting out fire content and yall will go far!! When my son was born, I stayed up many nights watching your videos rocking him. Thanks for the entertainment!! God Bless

    • @CarsandCameras
      @CarsandCameras  6 лет назад +24

      Thanks man! That really means a lot! Seriously!

    • @bro9654
      @bro9654 3 года назад +1

      @@CarsandCameras 💯

  • @smallenginedude71
    @smallenginedude71 6 лет назад +44

    seriously. this channel is freakin awesome, been here since 1k subs, and yall have just got better and better.
    greetings from Australia!

  • @cjhiggi6018
    @cjhiggi6018 6 лет назад +10

    This is an amazing idea I’m a huge back to the future fan so this series will be GREAT!!

  • @Rideaholic069
    @Rideaholic069 6 лет назад +16

    GREAT choice guys. Back to the future is and always will be my favorite movie trilogy of all time.

  • @RAWuhh
    @RAWuhh 6 лет назад +4

    you guys inspired me to build my own go kart. You're my favorite channel.

  • @Caniboss1
    @Caniboss1 6 лет назад +5

    The DMC (DeLorean Motor Company) is in Humble, TX. I used to live down the road from there. Y'all should hit them up for some glamor parts potentially. Maybe even some input on what to add to your kart. Cool build can't wait to see what y'all come up with.

  • @garrettramsey3172
    @garrettramsey3172 6 лет назад +6

    Y’all make me want to work on more stuff me and my dad work on stuff for around my area and y’all help out some parts I don’t know what it is thank y’all for videos keep it up

  • @GruesomeJeans
    @GruesomeJeans 6 лет назад +15

    I really like that frame. It looks awesome. This build has good potential!

  • @rowan2128
    @rowan2128 6 лет назад +5

    Back to the future cart?! That was my fav movie when I was a kid. I want see the cart hit 88 mph that would be great

  • @darktau1033
    @darktau1033 6 лет назад +11

    Hi guys,
    I would really like to see more videos on you riding your projects around.

  • @johnrusk977
    @johnrusk977 6 лет назад +1

    Yalls tips and videos help me out alot on my builds big fan of you guys 🤘👍

  • @jmink
    @jmink 6 лет назад +413

    If you want to run it alongside a real DeLorean shoot me a message. I'm standing in front of mine in my picture.

    • @CarsandCameras
      @CarsandCameras  6 лет назад +107

      Just emailed you!

    • @Boemel
      @Boemel 6 лет назад +11

      yes :D

    • @Ratkill9000
      @Ratkill9000 6 лет назад +24

      I'm jealous. Wish they were still in mass production.

    • @Ratkill9000
      @Ratkill9000 6 лет назад +8

      Jeffrey Wain more like "new". They are built using left over parts from 1982/83 and sold as new. But they want something like $100,000 now.

    • @trailerpark187
      @trailerpark187 6 лет назад +10

      If your Delorean is stock the go kart will probably beat you. 2.8 v6 not that great. Luv them anyways.

  • @davidsparks4826
    @davidsparks4826 6 лет назад +12

    Love the Content... You Guys are awesome!!!!!!!!

  • @itsyourboywyattakayourboy4767
    @itsyourboywyattakayourboy4767 6 лет назад +4

    Man I love these vids these vids get me through a rough school day

  • @joshseagraves1453
    @joshseagraves1453 6 лет назад +1

    Love the idea! Looking forward to seeing how this turns out.

  • @rave3016
    @rave3016 6 лет назад +1

    i'm so stoked to see the end result of this thing!

  • @crankysports
    @crankysports 6 лет назад +6

    super sweet idea!!

  • @Nissaninthewoods
    @Nissaninthewoods 6 лет назад +12

    Love watching the new videos!!!! I've finally have a project I'm working on it's a huffy bike with an 80cc 2 stroke kit

    • @nightmareinaction629
      @nightmareinaction629 6 лет назад +2

      Sopchoppy boy those aren't really projects I got one and they get boring fast you can barely upgrade them i installed a cdi in mine i changed my timing it went from 34mph to 43mph

    • @Nissaninthewoods
      @Nissaninthewoods 6 лет назад

      nightmare in action. I'm having a blast with mine. And from what I've found on various sites there's quite a few "performance" parts. Not only that in my state I can get it registered as a moped with an inspection. And plus With the way gas prices are going here. $3 dollars a gallon it's getting expensive to keep gassing up my truck every few days. ( 95 chevy 1500 powered by a 350 sbc) Verses filling up once a week with this bike.

    • @michaelangelod5008
      @michaelangelod5008 6 лет назад

      nightmare in action very true lol my friend has one and his brother rode it for just a day and muffler broke and so did the clutch

    • @anythingthatmoves9609
      @anythingthatmoves9609 6 лет назад

      Join the face book group bike berry motorized bike building group

  • @chasr34
    @chasr34 6 лет назад +2

    i love the movie back to the future, cant wait to see how this project turns out!

  • @davez4172
    @davez4172 6 лет назад +1

    Looking forward to seeing the 212 build. Morrrre Powerrrr!

  • @joebob6913
    @joebob6913 6 лет назад +5

    Loved The Vid! And Thanks For The Text Back!

  • @GoKartsorGoneFishin
    @GoKartsorGoneFishin 6 лет назад +20

    SMASHED THAT 👍BUTTON!

    • @chaseware3181
      @chaseware3181 4 года назад

      I LOVE YOUR CHANNEL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • @moparcasey3135
    @moparcasey3135 6 лет назад +1

    Cool build!!! Can't wait to see what 1955 is like!

  • @siafu-1764
    @siafu-1764 6 лет назад +1

    The idea is soooooo cool. I would have never thought of the idea myself

  • @Ramblin_DMC
    @Ramblin_DMC 6 лет назад +3

    As a DeLorean owner myself. Very excited for this! I made a full time machine conversion for my car as well!

  • @axismc33
    @axismc33 5 лет назад +7

    Y'all make the best go karts, keep it going

  • @bryandinardi2519
    @bryandinardi2519 6 лет назад +1

    You guys are inspiring me to build a budget racing mower!

  • @andrewforbes4817
    @andrewforbes4817 6 лет назад +1

    Looking sweet! Can't wait to see this thing go

  • @blkicemike4857
    @blkicemike4857 6 лет назад +3

    Bummer about the 420 mounting issues. BUT IT'LL WORK OUT …
    I think i'd go ahead and fix camber issues now while it's bare,.. Ahh y'all got it down .. this will be interesting to see where it ledes.. Be safe ..

  • @szymonskowron6234
    @szymonskowron6234 6 лет назад +12

    CARSANDCAMERAS BABY !!!!

  • @jackharris8932
    @jackharris8932 6 лет назад

    So pumped for the build!

  • @MichaelJohnson-xo7yd
    @MichaelJohnson-xo7yd 6 лет назад +1

    Can't wait to see this one finished.

  • @retrox684
    @retrox684 6 лет назад +8

    you should buy an original american express go kart with the original briggs engine and then compare it too one of the new kits made with completely new parts and do a show down

    • @savitrrakatamatah7256
      @savitrrakatamatah7256 5 лет назад

      RetroX this go kart is the exact one that you can buy online engine and all. Also I bought an American Express go kart for 25 bucks because the guy said it had a blown engine, turns out it needed fresh gas. It does 32 mph so a little slower than 72.

  • @jonahsmith2944
    @jonahsmith2944 5 лет назад +18

    the kit for this kart is pretty expensive (around $1'500), couldnt you just purchase one of the $400 engines and just building your own kart for alot less?

  • @mingusbreeze
    @mingusbreeze 6 лет назад +1

    Can't wait to see it run.

  • @nestorurbanotirado5193
    @nestorurbanotirado5193 6 лет назад +2

    This proyect will be amazing guys !!!!

  • @andrewsistrunk5235
    @andrewsistrunk5235 6 лет назад +6

    Always love your videos guys! #fortestingpurposesonly #itllbefine

  • @samuellafferty4454
    @samuellafferty4454 6 лет назад +7

    love ya'll

  • @duncan9168
    @duncan9168 6 лет назад +1

    Stoked this is gonna be a baaaadass gokart.
    It's funny I was legit looking at all the parts you've used so far yesterday cause I'm making a gokart for my little brothers.

  • @keaganshaw7194
    @keaganshaw7194 6 лет назад +2

    Love this channel you guys have the best ideas

  • @xixdeleonxix4356
    @xixdeleonxix4356 6 лет назад +6

    you guys are the best back to the future is the best lol

  • @jtj_2265
    @jtj_2265 6 лет назад +15

    ive got an outta time licence plate from universal studios, maybe i can send it your way!

  • @markssmallengines3542
    @markssmallengines3542 6 лет назад +1

    Love it, great theme guys 😁

  • @johnmatthews7283
    @johnmatthews7283 6 лет назад +2

    I love your videos, i learn so much from them!

  • @MackFire_Sets
    @MackFire_Sets 6 лет назад +14

    420 cc engine :D hmmm that means it runs on weed ? :D
    I know it's bad joke but who cares :D

  • @ericksaldana4453
    @ericksaldana4453 6 лет назад +3

    Also put some front end brakes if ur going 88mph

  • @danieltichenor7579
    @danieltichenor7579 6 лет назад +1

    Thank you for doing the american express. Cant wait to see the end result!!!!!

  • @D4NS80
    @D4NS80 5 лет назад

    Good to see someone using a spray paint can correctly ;-)
    This kart looks great.

  • @tiptoes710
    @tiptoes710 6 лет назад +3

    You should of said "we'll see you in the future" lol

  • @ColtSSR
    @ColtSSR 6 лет назад +5

    It needs blue LEDs that light up underneath when you hit 88mph

    • @ColtSSR
      @ColtSSR 6 лет назад

      And a small bike size outatime number plate, i think there on ebay, also a mr fusion on the tank.

    • @ColtSSR
      @ColtSSR 6 лет назад

      Mini mr fusion m.ebay.com/itm/Back-to-the-Future-Mr-Fusion-Car-Charger-ThinkGeek/253623025193?epid=16017652302&hash=item3b0d1c3e29:g:guoAAOSwYUBa-eIr

    • @ColtSSR
      @ColtSSR 6 лет назад

      Small Outatime plate m.ebay.com/itm/Back-to-the-Future-Delorean-OUTATIME-LICENSE-PLATE-BICYCLE-SIZED-3-X-6/251806353352?hash=item3aa0d407c8:g:iGgAAOSw8d9Uw-0k

    • @ColtSSR
      @ColtSSR 6 лет назад

      Mini time circuits m.ebay.com/itm/MINI-Time-Circuits-Box-from-Back-To-The-Future-with-backlight/142763455503?hash=item213d5d740f:g:P34AAOSwV6ta2JYR

  • @The505productions
    @The505productions 6 лет назад

    Hey guys love your videos. I have a mini bike with a 5.5 Honda clone, that I built from scratch in high school. Watching your videos males me wanna dig it out of the garage and put some miles on it.

  • @OrionMoniz
    @OrionMoniz 5 лет назад

    When it comes to thinking about go karts I always watch you guys and you guys have the best content for go karts keep up the good work! And also I like DeLoreans I think they are cool.

  • @Ratkill9000
    @Ratkill9000 6 лет назад +7

    When this baby hits 88 miles per hour, you're going to see some serious s***.

  • @jeremyware174
    @jeremyware174 6 лет назад +3

    Buy the flux capacitor usb charger off Amazon

    • @CarsandCameras
      @CarsandCameras  6 лет назад +3

      I bought the one on Etsy... I hope it shows up😬

  • @roadwarrior1450
    @roadwarrior1450 6 лет назад

    Looking forward to the finished kart. Really like the channel.Keep on keeping on.

  • @clutch5sp989
    @clutch5sp989 2 года назад

    Dennis is a really great guy. I hoped his idea would have launched better and really wanted one of those frames. The simple karts are the best in my opinion. Currently have a Manco Sidekick in the restore mode.

  • @RAWuhh
    @RAWuhh 6 лет назад +3

    #itllbefine

  • @rcmadness5672
    @rcmadness5672 6 лет назад +9

    Yesterday was my birthday I'm
    now 15

  • @chris851900
    @chris851900 6 лет назад +1

    I love watching ur guys vidoes keep up the good work hope u can get it to go 88mph and it be cool to go back in time

  • @XXXCRSPL
    @XXXCRSPL 5 лет назад

    Love the show learned a lot from you guys keep it up!!

  • @rustyshacklfort9508
    @rustyshacklfort9508 6 лет назад +3

    Yup this is the one that's gonna put you in the hospital.

  • @billypierce4247
    @billypierce4247 6 лет назад +26

    212s are getting boring its always what we see on here

    • @janeames1513
      @janeames1513 6 лет назад +3

      the space is limited on the chasis...and 212's can be beefed up to keep up with 4 cylinder cars..

    • @billypierce4247
      @billypierce4247 6 лет назад +6

      Jane Ames they can stretch the chassis and its that i don't like the 212 I would just rather see a 420

    • @propaneandpropaneaccessori3446
      @propaneandpropaneaccessori3446 6 лет назад +8

      Any engine without a manual trans is boring lol

    • @CarsandCameras
      @CarsandCameras  6 лет назад +9

      We do plenty of stuff with other engines! The Lifan 200. 670 V Twin. 900 V Twin. 140 race engine. There are just tons of possibilities with the 212. That's why you see them everywhere.

    • @dayyou
      @dayyou 6 лет назад +4

      Idk man the predator engines have gotten old. Everyone and their mother uses predators. They don't rev very high and make the same amount of power as twostorokes that have half the displacement.

  • @oldgeezer7484
    @oldgeezer7484 5 лет назад

    In 1973 I went 57 MPH on a Bug Cart with a 6ci Tecumseh 4 stroke horizontal shaft. Full disclosure; I worked for a racing engine builder in North Hollywood, CA. A flat head ported and relieved, milled head, modified piston and the oil system modified for dry sump. The crank was drilled so the rod bearing was pressure oiled. Custom intake ported and a diaphragm carb. Direct drive to the axle and yes it needed to be push started. I still have the motor on a display stand. Did I mention 6 cubic inches?
    Build on my friends. going 60 with your butt 2 inches from the ground is a thrill.

  • @frankshively5551
    @frankshively5551 6 лет назад +1

    Love this build!

  • @dayyou
    @dayyou 6 лет назад +1

    Love the vids! Have you guys ever thought of breaking into the two stroke world? A 3 cylinder two stoke would make that thing fly!

  • @justinoliver1984
    @justinoliver1984 6 лет назад +1

    Yes!! Need one of those shirts... lol! Can't wait to see this build finished, gonna be sweet! Now to get the flux capacitor a fluxin'

  • @williammesser2448
    @williammesser2448 6 лет назад +2

    His face when he says, “It’s always a lot bigger than I remember”😆😆

  • @floriankrentz7482
    @floriankrentz7482 6 лет назад +1

    It would be nice when you build a stainless steel DeLorean body around the go kart! Great video!

  • @IvanInfinityLirycsAntonelli
    @IvanInfinityLirycsAntonelli 6 лет назад +1

    for the aesthetics it comes the flux capacitor usb charger for 12v, a led adhesive stripe blue for the front bumper and the back of the kart, and don't forget a "mr. fusion" cap for the gas tank, greetings from argentina!

  • @shannonoshea644
    @shannonoshea644 6 лет назад +1

    This is gunna be wicked as always guys big BTTF fan can't forget the flux capacitor haha and maybe some old school digital guages and or time circuit inspired ignition/kill switch haha but either way it will be awesome

  • @thevampiredude7
    @thevampiredude7 6 лет назад +2

    Make it interesting Smog pump supercharger!!! I'd love to see a build with one documented well

  • @K3NnY_G
    @K3NnY_G 6 лет назад

    That's one of the nicest looking shirts anyone I watch on YT has done up, genuinely get those on the store.

  • @biggerbrain.the.blacksmith
    @biggerbrain.the.blacksmith 5 лет назад +1

    Once again the harbor freight gods have paid off😀

  • @weldorman8495
    @weldorman8495 3 года назад

    FINALLY! Something with some decent welds on it!

  • @DeBoswachter
    @DeBoswachter 6 лет назад

    Great shirts! And darn Nice welds on that chassis!

  • @igorbaldo
    @igorbaldo 6 лет назад

    Hey, John, the DeLorean was only "coated" with stainless streel; its chassis was regular steel, and its body was glassfiber reinforced plastic, coverd by the SS panels. Loved the idea and can't wait to see it finished. Dont't forget the soundrack!

  • @chillwill3109
    @chillwill3109 6 лет назад

    Awesome , can't wait to see what you guys do to that 212 ! there is definitely guys out racing 85 mph minibikes an racing karts with the 212 but on a old school frame like that !?!? damn its gonna be crazy an i can't wait ..lol

  • @sapcraft858
    @sapcraft858 5 лет назад

    It's allways a lot bigger than I remember 😂, good video, really helped to make a fast go kart, really cool

  • @MAS-Garage
    @MAS-Garage Год назад

    Nice build. really nice, love

  • @Bandit1976
    @Bandit1976 6 лет назад +1

    Finally back to go karts this week! Man go with the 420cc on this one, you can move the electric start to the front, I did it on mine with 40 series torque converter from Gopowersports.

  • @ColtSSR
    @ColtSSR 6 лет назад +2

    Bttf - best movie ever made!

  • @luckymech9998
    @luckymech9998 6 лет назад

    Awesome!!!! Need to do an herbie beetle theme also!

  • @FatsharkFun
    @FatsharkFun 6 лет назад +1

    Sweet build! You guys should consider a small steering rack. It might be more stable at those kinds of speeds...

  • @Mile-long-list
    @Mile-long-list 6 лет назад +2

    Great Scot! Please ensure the flux capacitor is in working order

  • @aaronsosnoski1017
    @aaronsosnoski1017 6 лет назад +1

    Hank Hill is at it again!

  • @rustyprojects1545
    @rustyprojects1545 6 лет назад +2

    I love that movie!

  • @zac_vaughn
    @zac_vaughn Год назад

    The wider the track, the more leverage bumps have on the steering. The knuckles act like levers, the longer the levers stick out, the more easily the steering can be pushed around by anything bumping the tires.

  • @CamaroRick
    @CamaroRick 6 лет назад +2

    So shiney so chrome

  • @bradymoeller203
    @bradymoeller203 6 лет назад +1

    I like how I just watched back to the future and now I'm watching this 😂

  • @bradonerty5414
    @bradonerty5414 6 лет назад +1

    I love you guys thank you for the bad ass content

  • @cryptonight4860
    @cryptonight4860 6 лет назад

    Love the movie & love the idea,just hope you don't end up having to wait for a thunderstorm to achieve 88 mph!

  • @alexmarti9011
    @alexmarti9011 6 лет назад

    Arc has been making 212 parts forever

  • @NancyofNC
    @NancyofNC 6 лет назад +1

    I like the shirt! LOVE the BTTF theme!!!

  • @zanecrocker9091
    @zanecrocker9091 6 лет назад

    I love watching these gokart vids, the ones with slicks, buy now the delorean just need a shifter engine

  • @frogglidd1951
    @frogglidd1951 6 лет назад +1

    All right I got a good idea for the flux capacitor get a slingshot and put some lights on it there's lights that you can buy that are in a strip that might work for you good luck on a build I love watching them

  • @zagumennyy
    @zagumennyy 6 лет назад +1

    Cool project!