At last after watching your videos a couple of times and reading a lot of forums I managed to connect to my broker. I was struggling because Logo Soft Comfort gave me constantly an error message, because it was unable to connect. I was looking for a "Client ID" but you just can fill that in with something you want. Now I get it. On to the next part, make Home Assistant work together with the Logo ;) Edit: The strange thing is that I don't see a value in the "Cloud Data Transfer Settings" it's empty.
Hi, great video about new hardware version V8.4, thank you very much for that. Besides, could you share the information, where such (older) stand with older LOGO hardware can be available?
Hello Marek, Thank you for watching and your feedback. I received the demo box from my local Siemens office in Canada. I'm not sure if it's available in other regions. But I'd suggest contacting someone at Siemens in your area and ask for a similar demo.
Hi my friend congratulations for this excelent video, I have a problem, i have the Logo 8.4, I see my ipv4 on windows and my PLC is in the same subred, but after make all the steps that you show to connect with mosquitto, doesn't connect, only I see connecting and after that show me a message "server connection error" maybe do you know what i have to do?
Thank you for your comment. Do you see the connection error? On LOGO side or on the MQTT client? You need to make sure your Mosquitto settings match what you enter in LOGO configs. If you have a username and password on the Mosquitto broker, you need to let LOGO know to connect!
Hello, LOGO can be a MQTT client. It cannot be an MQTT broker. So if you have an MQTT broker, LOGO can publish or subscribe to data on the broker. It can also be connected to Homeassistant as an MQTT sensor, etc. with JSON payload
Unfortunately, not yet. But there might be an unofficial way. For now, MQTT and email seems to be the best way to work with events. For sure middleware can be used too.
Hi Thorsten, You can try this link on SIOS: This is an upgrade. So you will need to have an oldef version su h ad v8.3 installed before running this upgrade support.industry.siemens.com/cs/document/109826553/download-and-installation-instructions-for-logo!-soft-comfort-upgrade-v8-4?dti=0&lc=en-US
@@thorstenfricke3257 if you had a previous version of LOGOsoft comfort on your machine, you don't need to do anything else. The file on the link upgrades your existing software. Otherwise, you have to do a one time purchase from your local Siemens rep. It's not an expensive software
@@dietersickert4284 apologies for that. I noticed after recording was done. I alwaus try to add the missing info as a text on the description or on the video. Please let me know if you need more details on any possible missing section.
Hello, I only use RPI for lab tests. In production, I use IPCs or SBCs like Siemens IoT2050, Advantech mini PCs, etc. But I've been using RPIs for years. They normally work fine but their SD card and power supply sometimes fail. Using SSD drives instead of SD cards and a reliable power supply helps.
@@thorstenfricke3257 anytime. You may watch this video for full tutorial if you want to learn more about IoT2050: ruclips.net/video/nZoEvhbcQfs/видео.htmlsi=yTXi3dvikCqlzhAo
I would like to see how you connect one LOGO 8.4 to another LOGO 8.4 over MQTT. I can so far publish ONE LOGO to the broker, but I can´t subscribe a second LOGO 8.4 to the topic, because some kind of json string is required to publish to the subscriber.
Hi Artur. I have not tested two LOGOs communication over MQTT but you don't need to handle any JSON. You just need to define the same topics name in both LOGOs and map a certain memory area within the pub/sub. I'll create another video for it.
this is the first video i have seen on your channel and it is a very informative and straight forward , i like it, please keep going.
Thank you for watching. Hope you enjoy the rest of tutorials.
Great as always. Thank you for sharing. I was looking for a tutorial on this topic for a while 👍
Thank you for watching.
This video was very useful, many thanks
Thank you for watching.
Yes was useful to me im iot tech
At last after watching your videos a couple of times and reading a lot of forums I managed to connect to my broker.
I was struggling because Logo Soft Comfort gave me constantly an error message, because it was unable to connect.
I was looking for a "Client ID" but you just can fill that in with something you want. Now I get it.
On to the next part, make Home Assistant work together with the Logo ;)
Edit: The strange thing is that I don't see a value in the "Cloud Data Transfer Settings" it's empty.
Awesome! Hipe you enjoy using your new LOGO. Let me know if you come up with any questions on the way
Hi, great video about new hardware version V8.4, thank you very much for that. Besides, could you share the information, where such (older) stand with older LOGO hardware can be available?
Hello Marek,
Thank you for watching and your feedback.
I received the demo box from my local Siemens office in Canada. I'm not sure if it's available in other regions. But I'd suggest contacting someone at Siemens in your area and ask for a similar demo.
Like the video. have you tried the email set
Thank you for watching. That's on my list for the next video. Should be ready this week.
Hi my friend congratulations for this excelent video, I have a problem, i have the Logo 8.4, I see my ipv4 on windows and my PLC is in the same subred, but after make all the steps that you show to connect with mosquitto, doesn't connect, only I see connecting and after that show me a message "server connection error" maybe do you know what i have to do?
Thank you for your comment.
Do you see the connection error? On LOGO side or on the MQTT client? You need to make sure your Mosquitto settings match what you enter in LOGO configs. If you have a username and password on the Mosquitto broker, you need to let LOGO know to connect!
I don't understand if logo can be used only with MQTT broker or comunicate in a local red. ? Can interact with homeassistance ? thanks
Hello,
LOGO can be a MQTT client. It cannot be an MQTT broker. So if you have an MQTT broker, LOGO can publish or subscribe to data on the broker. It can also be connected to Homeassistant as an MQTT sensor, etc. with JSON payload
@@blociot Estamos hablando de una comunicación a nivel local... sin internet ? gracias.
Is it possible to call urls / webhooks from the LOGO?
Unfortunately, not yet. But there might be an unofficial way. For now, MQTT and email seems to be the best way to work with events. For sure middleware can be used too.
i cant find the sw 8.4 anywhere in the german internet. please could send me a link?
Hi Thorsten,
You can try this link on SIOS:
This is an upgrade. So you will need to have an oldef version su h ad v8.3 installed before running this upgrade
support.industry.siemens.com/cs/document/109826553/download-and-installation-instructions-for-logo!-soft-comfort-upgrade-v8-4?dti=0&lc=en-US
@@blociotthank you! i downloaded a demo from those link you provided. but i dont know how to make a non demo version from it. i have to find out
@@thorstenfricke3257 if you had a previous version of LOGOsoft comfort on your machine, you don't need to do anything else. The file on the link upgrades your existing software. Otherwise, you have to do a one time purchase from your local Siemens rep. It's not an expensive software
@@blociot thank you
@@blociot it was much easier! reichelt sold the 8.4 sw! amazing! i was surprised when it came
I use a VPN router to see LWE website but with Mqtt protocol can someone make an smartphone app with datas from an MQTT broker ? many thanks
Sure you can. Facebook messenger app is a good example that mostly uses MQTT for communications.
@@blociot Entonces si el logo envia las variables en un cloud como AWS. Un desarollador de app para movil podria crear una app ?
1000 thanks
Warum verdeckt das Videofenster die Einstellungen ?
@@dietersickert4284 sorry I don't understand the language. Woupd you be able to ask in English ot reach out on Linkedin?
@@blociot sorry, why block the overlay video important information, in another Video the same
@@dietersickert4284 apologies for that. I noticed after recording was done. I alwaus try to add the missing info as a text on the description or on the video. Please let me know if you need more details on any possible missing section.
Have u any problems with raspberry pi5? i mean HW problems?
Hello,
I only use RPI for lab tests. In production, I use IPCs or SBCs like Siemens IoT2050, Advantech mini PCs, etc.
But I've been using RPIs for years. They normally work fine but their SD card and power supply sometimes fail. Using SSD drives instead of SD cards and a reliable power supply helps.
@@blociot yes i use ssd and now power supply with 5.1v. i will search for siemens.... thank u
@@thorstenfricke3257 anytime. You may watch this video for full tutorial if you want to learn more about IoT2050:
ruclips.net/video/nZoEvhbcQfs/видео.htmlsi=yTXi3dvikCqlzhAo
Can do you a video about LOGO! CIM?
Hi Johnny,
I don't have the CIM hardware but I'll put it on the list for upcoming videos. Thanks for the idea.
I would like to see how you connect one LOGO 8.4 to another LOGO 8.4 over MQTT. I can so far publish ONE LOGO to the broker, but I can´t subscribe a second LOGO 8.4 to the topic, because some kind of json string is required to publish to the subscriber.
Hi Artur.
I have not tested two LOGOs communication over MQTT but you don't need to handle any JSON. You just need to define the same topics name in both LOGOs and map a certain memory area within the pub/sub. I'll create another video for it.