I always enjoy your videos. You always show the complete troubleshooting, diagnostic, removal, replacement and reinstallation. No one does it better than you. I have a 3.0L and I like your reference that the charge air cooler replacement would be the same. Thank you
Appreciate the attention to detail at every step, you’re doing a great job. I noticed the new charged air cooler had a dent on the right out of the box
@@KITS_Auto_and_Truck_Repair at 27:00 as you unwrap the new cooler, if you look at it, on the right side has a small dent, looks like from being hit or dropped. The cooler not the box
I love that you tested it with the smoke machine !! That’s the kind of details we need ! Also love how you explain everything simply. One question comes to mind, is such a leak fixable ? With a liquid or some special type of glue or something else ? Great stuff man ! You’re a sprinters best friend
Good video and can be used to help with replacing the aircon condenser too. Only thing I can add is I found unclipping the grille to be easier using a screwdriver from the front and prizing clips away from metal surround then grill in two stages.
@@KITS_Auto_and_Truck_Repair I have seen tons of videos about Sprinter, and the way you perform yours is really impresive in overall. I have suscribed your channel. Best regards from Spain, Jose
@@KITS_Auto_and_Truck_Repair Thank you No all it has is the rubber diafram with a spring there is no service able filter The older model had 4 screw to give you access to the replaceable filter
Great work! Do you do oil changes and brake pad/rotor replacements? I don’t have any major issues with my vehicle, but I would love to support your business.
Ladeisha Williams Thank you! I appreciate it! yes I do oil changes and brake work too! You can email me at Deo@calleva.org for shop info/address! we're looking forward to doing business with you!!
Greetings. Let me ask you a question. I have an ncv3 Sprinter with engine knock. And I also have an Ml320 OM642 engine sitting there. Do you think I can use that ML320 engine on the Sprinter and transfer the right Camshaft, the left intake, the oil pan, and the Harmonic balancer from the Sprinter to the ML320 to install that engine on the Sprinter?
I'm getting a P0101 CODE. MAF sensor range. I replaced the MAF. Didn't fix the issue. Anyone know if this charge cooler or charge cooler hose could cause this P0101 MAF sensor code?
hallo my friend i want yor help i have a hyundai tucson 2009 2.000cc and maf sensor reading at 2500 rpm 7gr/sec .I know that the maf at 2500 rpm should count from 15 to 25 gr/s .fuel trims is ok at wot vol efficiensy is 90%.the mαf passes all the tests. there is no blocked air filter. should I change the sensor or not. what else can it measure low at 2500 rpm? clogged exhaust?wrong timing ?I also found the idle throttle at 5.4%. I know that in hyundai it is 0%. Do you have access to a manual to tell me what % the throttle should be at idle?
DIMISRAMBO DIMISRAMBO it sounds like you might have a blockage in the exhaust system! check your exaust back pressure, and consider a timing issue as well!
@@KITS_Auto_and_Truck_Repair it is vvt, it has a strap in front and a chain in the back. in the back of the chain it has the vvt system ,solenoid is ok oil is ok mybee vvt gear no responce i see next 2 days in live data ....thanks my friend for your help WITH YOUR VIDEOS ON THE MERCEDES DIESEL TRUCK YOU ARE THE REASON I STARTED TO MAKE TURBO DIESEL.....THANKS AGAIN
@@KITS_Auto_and_Truck_Repair Im replacing the Rad, water pump and intercooler at the same time. Having an issue getting the rad separated from the a/c. Lower rad hose not co-operating either. Lol
Sir can i ask you about my trouble in Mercedes Benz 2016 the condenser fan not working because there is no supply.where is the exact location of fuse and relay sir? Like this Mercedes sprinter sir
27:08 would not this have been a good time to clean these grills off the AC condenser, coolant radiator, etc. ? All that dirt has to restrict the cooling of all those.
I always enjoy your videos. You always show the complete troubleshooting, diagnostic, removal, replacement and reinstallation. No one does it better than you. I have a 3.0L and I like your reference that the charge air cooler replacement would be the same. Thank you
@barrycoble6034 My Pleasure! Thanks
K Diagnostics… Hope you truly realize just how much you are treasured, we are all your fans out here! This video is amazing and very informative!!!
DinhaS Thank you! I appreciate it!
This guy is the best !! so clear and precise, even the MB mechanics should watch this
@michaelessig1371 Thank you!
Appreciate the attention to detail at every step, you’re doing a great job. I noticed the new charged air cooler had a dent on the right out of the box
mircea cartas Thank you! I mean the charge air cooler box had a dent?
@@KITS_Auto_and_Truck_Repair at 27:00 as you unwrap the new cooler, if you look at it, on the right side has a small dent, looks like from being hit or dropped. The cooler not the box
@@mirceacartas6489 ok!
Thank you for all the work you do to educate the sprinter people.
Dragos B My Pleasure!
I love how you work
Nigeria man From Belgium🇧🇪
Felix Enoma Thanks my Friend!
I love that you tested it with the smoke machine !! That’s the kind of details we need ! Also love how you explain everything simply.
One question comes to mind, is such a leak fixable ? With a liquid or some special type of glue or something else ?
Great stuff man ! You’re a sprinters best friend
@claritywithteekay Thank you! that kind of leak is not fixable it's better to replace the entire cooler!
Good video and can be used to help with replacing the aircon condenser too. Only thing I can add is I found unclipping the grille to be easier using a screwdriver from the front and prizing clips away from metal surround then grill in two stages.
@brownbloke3388 Thanks!
Your are very thorough with your explanations & I enjoyed your deductive reasoning.
Thank you for sharing your knowledge & expertise!
Kenneth Johnson My Pleasure! Thanks
Sir Nic explain. ..sir really you are great machine
Lovepreet singh Hanjra Thanks!!
Another great training video !
@edsanders5479 Thank you!
You are good teacher I would like to work with you to improve my skills as mechanics
@edvinquintana8086 Thank you!
Excellent how to guide I only had to remove the bumper. Thank you
@threecans9137 My Pleasure!
Great job brother👌. Your channel is really valuable to the sprinter community and aids in avoiding the stealerships🤣😂
broGabiza HAHAH Thank you!!
Great Block Of Instructions
DJ Rico Guzman Thank you!
Great video very detail oriented!✌️
@scottjeans6184 Thank you!
good morning my friend,,another great vedio ,,thanks for uploading,
buboy bebing My Pleasure!!
Very detailed and informative thank you!
@rundmc1087 My Pleasure!
excellent video, perfectly done and explained. Good job!
jallxj91 Thank you!
@@KITS_Auto_and_Truck_Repair I have seen tons of videos about Sprinter, and the way you perform yours is really impresive in overall. I have suscribed your channel. Best regards from Spain, Jose
@@tecnology-today Thank you Jose and welcome to our youtube community!
Thank you Mr. K very good understanding.
Timmy Tran My Pleasure!!
Hi there Does anyone know were the crankcase breather filter if it has one Can't find it on my 2013 2.1 diesel
@patkelly9907 it should be on the crankcase breather tube on the inlet Duct!!
@@KITS_Auto_and_Truck_Repair Thank you No all it has is the rubber diafram with a spring there is no service able filter The older model had 4 screw to give you access to the replaceable filter
DEO GREAT JOB BRODSKY THANKS FOR SHARING MD 🦀
Joseph Bonilla My Pleasure bro!
Nice job. I like your videos.
Butch Young Thank you!!
Can you advise high pressure oil.pump in 1.5 ford engine malfunction etc
@user-ky7ty3ie1x what kind of advise do you need?
Great work! Do you do oil changes and brake pad/rotor replacements? I don’t have any major issues with my vehicle, but I would love to support your business.
Ladeisha Williams Thank you! I appreciate it! yes I do oil changes and brake work too! You can email me at Deo@calleva.org for shop info/address! we're looking forward to doing business with you!!
Greetings. Let me ask you a question. I have an ncv3 Sprinter with engine knock. And I also have an Ml320 OM642 engine sitting there. Do you think I can use that ML320 engine on the Sprinter and transfer the right Camshaft, the left intake, the oil pan, and the Harmonic balancer from the Sprinter to the ML320 to install that engine on the Sprinter?
Eric El Haojin Some parts can be interchanged
@@KITS_Auto_and_Truck_Repair Thanks
@@ericelhaojin3279 My Pleasure!
I'm getting a P0101 CODE. MAF sensor range. I replaced the MAF. Didn't fix the issue. Anyone know if this charge cooler or charge cooler hose could cause this P0101 MAF sensor code?
CaseyTurnerMusic Yes! a Boost leak can set a MAF Sensor code!
Great video.. thanks
@nabs2714 My Pleasure!
hallo my friend i want yor help i have a hyundai tucson 2009 2.000cc and maf sensor reading at 2500 rpm 7gr/sec .I know that the maf at 2500 rpm should count from 15 to 25 gr/s .fuel trims is ok at wot vol efficiensy is 90%.the mαf passes all the tests. there is no blocked air filter. should I change the sensor or not. what else can it measure low at 2500 rpm? clogged exhaust?wrong timing ?I also found the idle throttle at 5.4%. I know that in hyundai it is 0%. Do you have access to a manual to tell me what % the throttle should be at idle?
DIMISRAMBO DIMISRAMBO it sounds like you might have a blockage in the exhaust system! check your exaust back pressure, and consider a timing issue as well!
@@KITS_Auto_and_Truck_Repair it is vvt, it has a strap in front and a chain in the back. in the back of the chain it has the vvt system ,solenoid is ok oil is ok mybee vvt gear no responce i see next 2 days in live data ....thanks my friend for your help WITH YOUR VIDEOS ON THE MERCEDES DIESEL TRUCK YOU ARE THE REASON I STARTED TO MAKE TURBO DIESEL.....THANKS AGAIN
@@dimisrambodimisrambo7285 My Pleasure!
Can this air-cooler fit 2008 4 cyl sprinter?
ThaBrooklynFellah it should be the same!
If replacing the water pump at the same time as the rad and cooler is it necessary to tk the bumper down?
@DougMead-q1z NO! if you are just replacing the water pump you don't need to remove the bumper
@@KITS_Auto_and_Truck_Repair Im replacing the Rad, water pump and intercooler at the same time. Having an issue getting the rad separated from the a/c. Lower rad hose not co-operating either. Lol
Sir can i ask you about my trouble in Mercedes Benz 2016 the condenser fan not working because there is no supply.where is the exact location of fuse and relay sir? Like this Mercedes sprinter sir
@entingkabesote4788 Check tthe relay under the hood!
Excellent, Thank You
@renegadevehiclebodyrepairs2499 My Pleasure!
Отличный видео обзор!
Евгений Прима Thanks!
bon boulot frere!
rafik ellouzi Merci Beaucoup mon frère!
What model this car sir?
@entingkabesote4788 Sprinter!
27:08 would not this have been a good time to clean these grills off the AC condenser, coolant radiator, etc. ? All that dirt has to restrict the cooling of all those.
@GlennLaguna Good suggestion!
@@KITS_Auto_and_Truck_Repair Yeah even if you just used a quick dry method of compressed air and a brush nozzle vacuum.
Hello sir,kindly share ur contact en address want to bring my sprinter 2016 that has def issues
Felix Ongeri Hello my friend! I'm located in Dickerson MD, you can email me at Deo@calleva.org for shop address