How to Descale Your Lay Z Spa - Avoid that E02 Error Code
HTML-код
- Опубликовано: 22 июл 2023
- How to descale your Lay Z Spa pump unit and avoid that E02 error code. Scale is an appliance killer and your inflatable hot tub heater unit is no exception.
💰Do you want to save money running your hot tub❓ • 💰Do you want to save m...
☕ Support the channel here: www.buymeacoffee.com/CycloneCyd ☕
💡 Subscribe and hit that bell 🔔 to learn more about looking after your home.
EASY-SCALE descaler kit
WW 🌍 www.kelvinsgadgets.co.uk/
UK 🇬🇧 amzn.to/3DrnZS2
All-purpose descaler liquid
WW 🌍 s.click.aliexpress.com/e/_Dda...
UK 🇬🇧 amzn.to/3Y4IxZZ
USA 🇺🇸 amzn.to/3q2nudZ
Are you trying to grow your own RUclips channel? I use TubeBuddy, try it out for FREE:
www.Tubebuddy.com/CycloneCyd
Gear I use in filming and production:
bit.ly/CC_Gear
My videos are edited with Filmora X - try it for free
bit.ly/Filmora_X_try4free
Thank you
descale lay z spa pump, lazy spa e02 error code, lay z spa e02 error code,bestway lay z spa error code e02, how to descale your lay z spa, how to descale a lazy spa pump, how to descale a lay z spa pump, e02 error, e02 error code, hot tub e02 error, hot tub e02 error code, e02 error code on inflatable hot tub, inflatable hot tub e02 code, inflatable hot tub e02 error, white bits in hot tub, white flakes in hot tub water, white flakes in hot tub, white bits in hot tub water, hot tub water got white bits in, hot tub calcium build up 
Хобби
💰Do you want to save money running your hot tub❓ ruclips.net/video/N45mC8BGvBM/видео.html
Hello! Sort of related question - I don’t think my AirJet is accurately heating the tub - and it’s a brand new unit I got from a warranty replacement of my original heater/pump. It doesn’t seem as if the temp is registering accurately, nor is the heater turning on and off on its own as it should. Seems it heating all the time. Any tips on a reset or fixing this issue?
What a nice man! Thanks for the vid!
Brilliant. And just brought a device from Kelvin too! Thank you!
Very helpful like all your videos
Another wonderful informative video thanks for sharing
I Just bought one lay z sea and found your tíos on the Internet.rapidñy I suscribed to your RUclips Chanel.
I think RUclips are going to help me forward.
Greetings from Murcia,Spain.
Another amazing helpful video. 😊
Glad you think so! Based on what I have seen in my pump stripdown video I just published, i would suggest descaling every time you change the water.
You are a genius... Was looking at why I was getting little bits of white trash in the bottom of my tub after the second year
Brilllllliant - thanks for sharing 👍
You're welcome
Thanks for the video! I did not know that the unit came with seals, I was about to postpone my maintenance cycle to get new seals first. I didn't check the descaler, it didn't occur to me that easy scale actually cared, fair play to them.
Never knew you could use astonish! Would of saved me buying the descaler from clear water that cost a bit more! Just add the designated amount depending on the size of your tub and top weekly. Never had any scale problems!
Your videos have been a blessing since I decided to setup the hot tub this year. Sadly, energy prices are still insane :(
I was wondering if you have any tips for the pump being loud. I don't think it's near E02 level but the humming is certainly louder than I remember since we're in a new house now and the pump is situated in a different location (past our decking in back garden) which I thought might provide enough distance so we didn't notice the sound. I also want to make sure it doesn't annoy neighbors. I already have it on thick rubber matting I got free from a local gym.
We have a 2021 Paris tub and even with just the pump and heating on it's very loud. How are these new model pumps (yours is a different shape to mine). Mine is the egg shape.
Absolutely awsime😊😊
The tabbed washers taped to the sachet of OUST are provided to form a seal inside the couplings
very good - never had this issue, but this a great bit of advice - i'll know what to do when i see the scale, or i just might start each season and de-scale it. thanks for sharing.
I'm gonna suggest doing this each water change every 3-4 months. It can be descaling at the same time as emptying
@@AbouttheHouse0 thanks agian ! we dont use our hot tub that often, so not sure how often to change the water. Is changing the water based on frequency of use/people usng it, or age of the water. I do top it up once in a while as it naturally gets some in the air (we tend to use it in the evenings). Thanks again.
Going to try this thanks. Mine trips and wont heat
Can you please advise.... my st moritz is on decking like yours with the foam mats like urs bit find after the heavy rainfall we,ve had recently the decking aroiund the edge of the mats isnt drying out quickly ?
Hi. The tabbed washers taped to the sachet of OUST are provided to form a seal inside the couplings. Would you mind messaging us about our kits please.
Another excellent video, always clear and to the point. Out of interest do you leave your heater and pump running 24/7 or is it better to have the heater off when not in use?
If you're on a single rate tarriff, leave it on 24/7, but maybe turn the set temp down 2-3 degrees between uses (as long as you can remember to turn it back up 1-2 hours before the next use)
nice ta
Where did you purchase the easy scale unit from please
We need these here in the US. Why does water come out of the air pump hole?
Hi I was wondering if u can do a video on how to bring chlorine down as I put too much chlorine reducer and bang no chlorine also how to get ph right cheers
where i can buy all the ggod caps and the stuff to clean it?
Where can I get the kit from in USA
Hol lehet ilyet venni hozzá amit rátesz az a kék tartály?
Can you disconnect the pump without draining water?
I've a airleak in the C pipe tube area, not the C pipe itself but when I wriggle the C pipe it gets worse. Any help would be GREATLY APPRECIATED
Thanks a million
You can buy new seals for the connections. I'll do a video on that soon.
You can also get the pipes themselves.
Thanks for the video, I bought this contraption after watching this video, however, I've justed added the descaler in that come with it, but my pump won't even turn on for more than 5 seconds, either with heat or just circulation.
I'm still really hoping this will help, but I have no clue why it won't stay on and makes me fear the worst.
Any ideas?
Does it show E02 in the display? If so, it'll be a faulty flow sensor
@@AbouttheHouse0 so does that mean i have to replace the sensor? is that something I can do or do I need a professional of which I don't think there are many in Kent
@@MarlonKingShowyes, plenty on ebay
Hi... why after descaling in which plenty white scale came out and more after hosing and water is clear does my eo2 keep coming back on within 2mins.?
Could be impeller problem . They will crack and need to be replaced. That is only one of many many E02 code causes however…. You can check a variety of videos for E02 code causes….
It's take me 1h to full the hot tub with hot tap and hose pipe. That costs me 1£ of gas. No chemicals. the hot tub is ready at 40deg in 1 hour. After use a use a puddle pump to pump 600l per min out. So it costs me £10 a month to run. That's also means no need for the silly lid inflatable that goes minging and deflates
I've been thinking about that too. Maybe just emptying and refilling the tub every 2 weeks is cheaper energy wise and needs less maintaning.
7 months on. Still no issue with the filling up from hot tap. Infact plubed in the drain along a wall now so just put pump in and connet it to my drain paper to the drain. Only small issue. When it's cold and filling via hose the temp reaches 37 so needs to warm up on elec for a few hours to 40. In summer it's ready to go
Not on a water meter then? 😅
@@TomskiZima nope I'm getting my 64 pound a month worth🤣
@@poo7481 😂 you do right!!! I might have to consider this, but my water meter needs a magnet or something first 😆
I cant find the attachment to put the descaler in. Im in the US and it isnt avaliable thru Amazon
Did you ever find a US option?
I’ve tried to descale my E02 with the kit, my tub is a lazy spa Maldives, I’m going to try again one more time, how easy it it to repair after that or is there an engineer that could do it?
Have a look at my video about the egg leaking. i show a full strip down. It's not difficult
Where can i find the attachment. It isnt avaliable anywhere ive looked
Easy Scale hot tub descaler kit
I have no evidence of limescale in the water but we have had this for 3 years and the E02 code came up tonight so I'm guessing it needs cleaning.
Based on what I saw in this weekends pump stripdown video, I suggest descaling every time you change the water.
Where did you buy it from?
amzn.to/3DrnZS2 in the UK
amzn.to/3DrnZS2 in the UK (there's a worldwide link in the description)
What if it goes straight to e02 as soon as you turn the pump on?
Is that a sensor issue?
Hi, I have the same problem, did you solve yours? Does this mean that the pomp is broken? Or only the sensor? On mine, I cannot put only the heater on, filter goes also straight ON. Help!
another common problem causing E02 code is the impeller, it is easy to fix, there is another guy on youtube with an explanation of how to do it, mine broke after 2 years
I can not find anyone shipping to Denmark😡
What about 50/50 water /vinegar
I've never used vinegar to descale, but people do say it works well.
I plan on using vinegar as my neighbor has been using it every season for the last 5 years very successfully. 😅
Hot spots? Not black spots lol?