We hung 42 of these four years ago for a customer in his 4-plexes. Not one has failed. Several had broken glass fixtures from careless renters, two had blades snapped off in fights, but the fans themselves - not one failure. And, yes, they were less than $25/unit at the local box store.
I bought one for my bedroom in 2017, it's pretty good, I like the look of it. It's a cheap fan for sure, it's nothing like the vintage ceiling fans, but whatever. It's a good fan.
I’ve had one of these in my bedroom for many years. While the bearing noise never really goes away and the chains on the pull-cords like to clank up against the light cover, it’s a very good ceiling fan for the little room I use it in.
My house originally had 4 fans and they were all littletons, the one in my bedroom was the only one that didn’t have a defect, the globe on my sister’s Littleton broke because I hit it with a trash can, my mom’s wobbled so bad that it scraped against the motor very loudly because 2 blades were bent, the one in my office had a pull chain issue and eventually it was only 1 speed, it was low or off, mine was fine and had absolutely no issues and blew a decent breeze, I thought it was ridiculous that mine got replaced with the others because my grandma wanted it to match the others
I had 2 of these; one in my parent's room and one in my room. The one in my parent's suffered a broken blade in 2018 and the one in my room almost burned down my house in 2020. I will try my 3rd attempt at buying one without it breaking (I don't think it will). That would go in the office at my house or the guest room. For sure the guest room because it would look better.
why is everyone complaining about the Littleton, yet the one I have survived all of my RUclips shorts ever since I got it, Trust me there's worst fans then the Littleton.
Also manufacturers stopped putting screw head markings on the light kit screws as many people would damage the glass by over tightening them. They never were supposed to do that with the screws as many companies didn’t do it until they started doing so with the school house fixtures sold separately. That’s why they don’t do it anymore to prevent people from over tightening it.
I bought a littleton a while back to install in the guest room. It works okay,especially since it is the cheapest fan you can get, but I feel like the $40 that I spent on it could have cone towards a much better used fan, but my mother wanted new. It works okay, but not great although it isn't used for much besides for the light 99% of the time anyway. Of course the LED bulb it came with went directly in the trash.
I put one of these in my nephew's room in '15 or so, cause I wanted the 52" Hunter (plus the room only needed a 36"-42" fan), and it's actually been surprisingly good and quiet. Also, my neighborhood liquor store has two of these over the front counter, with the bleached oak side showing...they have the schoolhouse shades installed, but I've yet to see the lights on. Also, you just demonstrated the reason why they included that extra screw! 😉 (I'm only joking. I mean no disrespect!).
Surprised you didn’t use the one you tested a few years ago in the garage. And yea the lowes version is better and moves more air. I got a Littleton new for my aunt recently to install in the hallway and while it does hum a bit and can be heard from upstairs it still does the job at least.
I remember back in 2009 they were $23-24 dollars. Then around the lockdown they were around $27-29. And more recently they went to $32 and then $37 and most recently $44. Definitely not a good product but for the price it’s not bad. As long as you get one with no bearing noise it’s a decent product for what it is.
I’ve purchased 2 of these in my 8th grade year and the bearings were loud right of the box and $45 is just ridiculous for a fan with loud bearings in my opinion
I installed one of these and it moves basically no air at all, on the forward or reverse settings. So I started looking online to see if I've done something wrong. Bizzarely many people have the same experience as me. But many have an experience like you. And I can clearly see that yours is working better because I see your hair moving. Sometimes manufacturers contract the same product to different factories at, and it could be that pitch of the blades differs on my model vs yours. /shrug. Anyway, mine is going back.
Years ago these used to be made by SMC, which was a fairly reputable company. I'm not sure who makes them as of now, it very well could be that it changes month to month based off the cheapest bid.
Ian the mechanical had 3 of these Hampton bay Littleton’s one in his room which is messed up one in a guest bedroom that you touch it sparks and other one that is good
Man I remember when I was on vacation in Rhode Island and my grandparents rented this house, and there was one of these in the basement where I stayed (had one of those above ground basements) and in the same room there was a Minka Aire supra, the 32inch model. Anyways this fan was beginning to fall out of the ceiling, and If you were to stand on the stairs and look at the top, you could tell it was only halfway flush with the ceiling and the other part had fallen down a bit.
Hi I bought this fan because it said in the page that it has a feature for sloped roof but now that is installed I don’t know how to use that feature, could you help me please? Thanks
These fans aren't that bad except for the subpar paint job. Edit: this model was released in 2020 and it replaced the older one, which in my opinion was much higher quality compared to the newer one.
I'm not sure if you noticed, but one of the rubber isolation pads (where the blade irons connect to the motor), was missing. I don't think it will make much difference, as it's not a super-quiet fan to begin with, but for an inexpensive, Chinese-made fan I'd say it's not bad at all!
@@JordanU 100%! It's a decent fan for It's low price. My old apartment actually had a late-90s version of this type of fan, but with antique brass motor housing and wooden blades. I hate that this model only seems to come it white now. It would be nice to see antique and bright brass options.
I had the Middleton which was the next model up from the Littleton it was 39.99 now it’s 60. It was the worst fan I ever had. was made by smc and had same motor just with 5 blades I had motor replaced twice under warranty the last time the bearings went too the point you could move the whole motor around too much play I finally gave up and bought a Hunter low profile iii and have had for several years and no problems so far I am a stickler when it comes to noisy fans especially in the bedroom.
Wow can’t believe these shot up so much from when I did my video about how these weren’t bad for the price point… that aged like milk at that price point I’d rather spend a few dollars more on a better quality option.
@@JordanUBut I have to give them credit even though they are poor quality they do move some air and if you can’t afford anything better this is the way to go
This fan hardly moves any air at all. I have it installed in my bedroom and I can't feel anything from it even at the highest speed in the downdraft direction. It is useless IMHO.
@@JordanU That's actually how they work. They are meant to drive everyone nuts. That is why I hated LEDs. They SUCK. I actually started getting nauseous just by looking at it. It made me dizzy and actually made me throw up. So don't use LEDs. NEVER!
Ms if he chbechxwhwcncejbce hdwwcjbjec ejbcjbecn wow xbjbechfbhcbfbjbceuugdgdu ugddejbxbeuexghxgeudgugdu txt hcrcygn dan ir e mvjchdviehcdvjbd bufvgufvudgudgvjdbvbd jbd d job j do d do bjddbjjdbkbd bexekbknejbwxkecbebjcebkkebckcneekncnkecekhejb
We hung 42 of these four years ago for a customer in his 4-plexes.
Not one has failed. Several had broken glass fixtures from careless renters, two had blades snapped off in fights, but the fans themselves - not one failure.
And, yes, they were less than $25/unit at the local box store.
These do seem to hold up pretty well over time.
Thanks for posting this excellent video. It was very helpful during installation.
You're welcome.
I bought one for my bedroom in 2017, it's pretty good, I like the look of it. It's a cheap fan for sure, it's nothing like the vintage ceiling fans, but whatever. It's a good fan.
Thanks for letting me know.
I’ve had one of these in my bedroom for many years. While the bearing noise never really goes away and the chains on the pull-cords like to clank up against the light cover, it’s a very good ceiling fan for the little room I use it in.
That's unfortunate, I was really hoping the noise would dissipate after a few hours of operation.
My house originally had 4 fans and they were all littletons, the one in my bedroom was the only one that didn’t have a defect, the globe on my sister’s Littleton broke because I hit it with a trash can, my mom’s wobbled so bad that it scraped against the motor very loudly because 2 blades were bent, the one in my office had a pull chain issue and eventually it was only 1 speed, it was low or off, mine was fine and had absolutely no issues and blew a decent breeze, I thought it was ridiculous that mine got replaced with the others because my grandma wanted it to match the others
@@JordanU do these fans go fast
@@coolsimanhead6165 What do you consider fast?
@@JordanU i mean it looks faster then the one In my room
I had 2 of these; one in my parent's room and one in my room. The one in my parent's suffered a broken blade in 2018 and the one in my room almost burned down my house in 2020. I will try my 3rd attempt at buying one without it breaking (I don't think it will). That would go in the office at my house or the guest room. For sure the guest room because it would look better.
Oh and I saw some at Home Depot today 🤣
OK
why is everyone complaining about the Littleton, yet the one I have survived all of my RUclips shorts ever since I got it,
Trust me there's worst fans then the Littleton.
Also manufacturers stopped putting screw head markings on the light kit screws as many people would damage the glass by over tightening them. They never were supposed to do that with the screws as many companies didn’t do it until they started doing so with the school house fixtures sold separately. That’s why they don’t do it anymore to prevent people from over tightening it.
Thanks for letting me know.
Your video helped me today! Thanks for this one! I appreciate it sir.
You're welcome.
I bought a littleton a while back to install in the guest room. It works okay,especially since it is the cheapest fan you can get, but I feel like the $40 that I spent on it could have cone towards a much better used fan, but my mother wanted new. It works okay, but not great although it isn't used for much besides for the light 99% of the time anyway. Of course the LED bulb it came with went directly in the trash.
The 40 dollars is much better spent on a used one that's old, but as you encountered, not everyone wants an old one.
I put one of these in my nephew's room in '15 or so, cause I wanted the 52" Hunter (plus the room only needed a 36"-42" fan), and it's actually been surprisingly good and quiet. Also, my neighborhood liquor store has two of these over the front counter, with the bleached oak side showing...they have the schoolhouse shades installed, but I've yet to see the lights on.
Also, you just demonstrated the reason why they included that extra screw! 😉 (I'm only joking. I mean no disrespect!).
I've seen these in commercial environments a number of times, they do seem to hold up OK over time.
Surprised you didn’t use the one you tested a few years ago in the garage. And yea the lowes version is better and moves more air. I got a Littleton new for my aunt recently to install in the hallway and while it does hum a bit and can be heard from upstairs it still does the job at least.
It wasn't worth the time to track down all the parts. They'll surface eventually.
Pretty cool garage calling fan bro i enjoyed the video
Glad you enjoyed it bro.
Good job!
Thanks
Decent enough. I enjoyed it 😊
Glad you enjoyed it.
I remember back in 2009 they were $23-24 dollars. Then around the lockdown they were around $27-29. And more recently they went to $32 and then $37 and most recently $44. Definitely not a good product but for the price it’s not bad. As long as you get one with no bearing noise it’s a decent product for what it is.
It’s ridiculous how much they cost now. The Farmington was about $50 two years back.
I remember when they were only 16 dollars, I believe that was sometime in the 2010s.
No wonder on why these fans get so much positive reviews on Home Depot, but meanwhile these are some of the most hated modern fans.
Most people that hate these are Casablanca-washed.
Nice ceiling fan
Thanks.
I really enjoyed the video nice installation and testing of this ceiling fan excellent video bro
Glad you enjoyed it.
New ceiling fan nice
That doesn't make sense.
How is the fan holding up after a year of use?
It was only in service for a few months, but worked properly the entire time.
I’ve purchased 2 of these in my 8th grade year and the bearings were loud right of the box and $45 is just ridiculous for a fan with loud bearings in my opinion
Thanks for letting me know.
I installed one of these and it moves basically no air at all, on the forward or reverse settings. So I started looking online to see if I've done something wrong. Bizzarely many people have the same experience as me. But many have an experience like you. And I can clearly see that yours is working better because I see your hair moving. Sometimes manufacturers contract the same product to different factories at, and it could be that pitch of the blades differs on my model vs yours. /shrug. Anyway, mine is going back.
Years ago these used to be made by SMC, which was a fairly reputable company. I'm not sure who makes them as of now, it very well could be that it changes month to month based off the cheapest bid.
@@JordanU FWIW I returned and replaced with another one and it worked fine. Issue with that particular fan I guess.
Ian the mechanical had 3 of these Hampton bay Littleton’s one in his room which is messed up one in a guest bedroom that you touch it sparks and other one that is good
OK
Thanks for doing this. I am really uninstalling mind. So ineed to know how it went up.
You're welcome.
The cheapest ceiling fan available is the mainstays Walmart hugger ceiling fan. Around $27.
Damn
Thanks for letting me know.
Landlords "special" fan. How many years for the warranty on the motor ?
15
@@JordanU pretty impressive for such a cheap fan
Man I remember when I was on vacation in Rhode Island and my grandparents rented this house, and there was one of these in the basement where I stayed (had one of those above ground basements) and in the same room there was a Minka Aire supra, the 32inch model. Anyways this fan was beginning to fall out of the ceiling, and If you were to stand on the stairs and look at the top, you could tell it was only halfway flush with the ceiling and the other part had fallen down a bit.
Thanks for letting me know.
Hi I bought this fan because it said in the page that it has a feature for sloped roof but now that is installed I don’t know how to use that feature, could you help me please? Thanks
It is not meant to be installed on a sloped ceiling.
These fans aren't that bad except for the subpar paint job.
Edit: this model was released in 2020 and it replaced the older one, which in my opinion was much higher quality compared to the newer one.
The paint is the least of the concerns, especially when it's on the ceiling.
@@JordanU Makes sense.
I'm not sure if you noticed, but one of the rubber isolation pads (where the blade irons connect to the motor), was missing. I don't think it will make much difference, as it's not a super-quiet fan to begin with, but for an inexpensive, Chinese-made fan I'd say it's not bad at all!
It's satisfactory for the price.
@@JordanU
100%! It's a decent fan for It's low price. My old apartment actually had a late-90s version of this type of fan, but with antique brass motor housing and wooden blades.
I hate that this model only seems to come it white now. It would be nice to see antique and bright brass options.
I see these in almost every apartment building that includes ceiling fans
Thanks for letting me know.
Even if it is the "cheapest" ceiling fan, it looks to move alot of air and at least it doesn't make alot of noise or wobble like some ceiling fans.
The bearings are audible, but everything else is at a reasonable noise level. Airflow is satisfactory for something of this size and style.
I have 2 of these in my house, both of them have bearing noises
Thanks for letting me know.
This is cool ngl
Thanks for letting me know.
for the price its not bad. but it probably wont last a long time like the good old vintage fans
I don't see why it wouldn't last.
22:58 The most accurate statement I've heard so far.
OK
I have one of these in my collection
OK
I got a ceiling faaaaaaaaan from eBay and it was $26 and $3 for shipping 💀
OK
I had the Middleton which was the next model up from the Littleton it was 39.99 now it’s 60. It was the worst fan I ever had. was made by smc and had same motor just with 5 blades I had motor replaced twice under warranty the last time the bearings went too the point you could move the whole motor around too much play I finally gave up and bought a Hunter low profile iii and have had for several years and no problems so far I am a stickler when it comes to noisy fans especially in the bedroom.
Thanks for letting me know.
my Hampton Bay Littleton is from 2009 And my ceiling fan is way better than that! It's quiet blows decent air!
OK
The landlord supreme
Or the Harbor Breeze Armitage
It serves that purpose just fine.
Wow can’t believe these shot up so much from when I did my video about how these weren’t bad for the price point… that aged like milk at that price point I’d rather spend a few dollars more on a better quality option.
The Kennesaw is $10 more and it has 5 blades and is pretty good looking.
@@TheFanatic13 whats funny is i had a kennesaw that i got at a flea market, guy wanted 10 bucks for it, and it was in a glendale box too.
I remember when these were 16 dollars, and that was only a few years ago. All the economy models have almost doubled at this point.
I remember when they retailed for $30
I remember when they retailed for $16.
21:13 I Like It With 3 Blades But Actually I like it in 4
I don't understand.
With these fans being “cheap plastic” and being sold for $40, these should be sold for $15.
I remember when these were $16, it wasn't all that long ago.
@@JordanU yeah. All that money for a cheap hugger?
The lowes fan should be a harbor breeze armitage ii and it is leagues better than a littleton.
OK
The mainstays hugger is actually cheaper than this
OK
I will say that while I don’t particularly like these I like the older ones
OK
@@JordanUBut I have to give them credit even though they are poor quality they do move some air and if you can’t afford anything better this is the way to go
Manufactured June 2021
I know.
Is it an ivory color
No.
@@JordanU oh phooey
Hey jordan did you know the Hampton bay littleton is the worst hated ceiling fan
That's stupid.
plot twist its the best hated one because everyone wants to see it
❤
OK
This fan hardly moves any air at all. I have it installed in my bedroom and I can't feel anything from it even at the highest speed in the downdraft direction. It is useless IMHO.
OK
Why don’t you like LEDs BTW?
They give me a headache.
@@JordanU That's actually how they work. They are meant to drive everyone nuts. That is why I hated LEDs. They SUCK. I actually started getting nauseous just by looking at it. It made me dizzy and actually made me throw up. So don't use LEDs. NEVER!
@@kaysonthefancollector8826 I have a hard time believing that.
@@JordanUsame here
You put LED trash in there?
I put whatever it came with.
Lol I told you that ceiling fan was a piece of crap.
That's cap.
I destroyed one it was cheap
What a waste.
You house ceiling fan installation bed room
That doesn't make sense.
now its $60🙄
OK
You should do ps4 because of the fans
That doesn't make sense.
You should do English class again.
Dude complaining about everything
That's ironic.
Lee’s are junk
Your comments are junk.
Ms if he chbechxwhwcncejbce hdwwcjbjec ejbcjbecn wow xbjbechfbhcbfbjbceuugdgdu ugddejbxbeuexghxgeudgugdu txt hcrcygn dan ir e mvjchdviehcdvjbd bufvgufvudgudgvjdbvbd jbd d job j do d do bjddbjjdbkbd bexekbknejbwxkecbebjcebkkebckcneekncnkecekhejb
@@JordanU jdiisieiieieeiiessjjejejeb iauaxxwueucueb Chen chandler. Ms sink Kja kaxnksnxkwndwxknejcnjebcjcebehehceh. Hnvitnigis jfiis nif ntivhvrivirhhrcuifn fbin fnif hirgihr, ( fry ugi hrybivhri thinbiufzq h si amo-/w
@@JordanU has a little humor that