Looks like you've had these for several years now -- You have any regrets? Would you get these again? They're expensive compared to other rops lights on Amazon - was it worth the extra expense?
Good question! You can certainly get the same lights themselve cheaper but I like the fact that it was all wired with the switch. Saved me time sourcing out the other stuff I would need. So for me it was worth it in it being plug and play. If I had more time and a little more knowledge in the components so I would get the right items the first time then I would have gone that route.
You would think those rop pipes could slide in and out and locked to any height with a pin. I was planing to buy a bx25 and park it in my garage but the garage door opener hangs lower than 7 feet. It's always something!
LOL, it is always something! That would be a good idea. Looks like you will need to get use to folding ROPs and maybe put a sign above door to remind you to fold before putting in but also that reminds you to put up. Thanks for watching and commenting!
I have dual lights Rops have not install yet being where you mounted your switch where is your electric harness located left side or right side looking backwards your switch is to the right.I'm going to install on z421 Kubota zero turn
I changed my oil and filter today (200 hours) without removing the bumper. I did move the cowling forward by about 2 inches and I did disconnect the two larger hoses for the bucket and just stuck my hand through and unscrewed the oil filter. No big deal... I think you should have tried harder...
Great video! How are the ROPS lights holding up after a year? I'm contemplating getting a 4 light setup (2 front facing and 2 rear facing) from this same sight or maybe try to buy the components separate. Looks like ROPSLights use a very similar light as this one: www.amazon.com/gp/product/B01LX7VITK/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=ATVPDKIKX0DER Of course, I'd still have to buy the wiring harness, etc., etc. so obviously buying the kit will be much easier but more expensive. If you had to do it again, would you still buy the kit or attempt to put one together yourself? Thanks!
Thanks I may order the 3 light kit as I may need to plow snow in dark. Enjoyed watching your videos
Nice addition , very clean install.
thank you and thanks for watching!
Looks like you've had these for several years now -- You have any regrets? Would you get these again? They're expensive compared to other rops lights on Amazon - was it worth the extra expense?
Good question! You can certainly get the same lights themselve cheaper but I like the fact that it was all wired with the switch. Saved me time sourcing out the other stuff I would need. So for me it was worth it in it being plug and play. If I had more time and a little more knowledge in the components so I would get the right items the first time then I would have gone that route.
Just got a 3 light kit for my B2920. Were you able to figure out any tricks for managing the wires? Thx for making this video. It was very helpful.
+Chuck Grubisic just some trial and error and used zip ties.
You would think those rop pipes could slide in and out and locked to any height with a pin. I was planing to buy a bx25 and park it in my garage but the garage door opener hangs lower than 7 feet. It's always something!
LOL, it is always something! That would be a good idea. Looks like you will need to get use to folding ROPs and maybe put a sign above door to remind you to fold before putting in but also that reminds you to put up. Thanks for watching and commenting!
wow---those should be standard equipment!!!!!!!!!!! Nice addition!!
agree!! thanks for watching and making a comment!
Nice. looks like you needed them.
Thanks Paul, they make a difference and should be a little safer.
I have dual lights Rops have not install yet being where you mounted your switch where is your electric harness located left side or right side looking backwards your switch is to the right.I'm going to install on z421 Kubota zero turn
+Lou Buf on the BX it is on the same side as the switch. I still have not ever switched the lights to the zero turn.
I changed my oil and filter today (200 hours) without removing the bumper. I did move the cowling forward by about 2 inches and I did disconnect the two larger hoses for the bucket and just stuck my hand through and unscrewed the oil filter. No big deal... I think you should have tried harder...
where did you get the light kit?
ropslights.com/
I forgot to put a link in the description. It's there now.
Thanks for watching and commenting! Stay Safe!
Great video! How are the ROPS lights holding up after a year? I'm contemplating getting a 4 light setup (2 front facing and 2 rear facing) from this same sight or maybe try to buy the components separate. Looks like ROPSLights use a very similar light as this one: www.amazon.com/gp/product/B01LX7VITK/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
Of course, I'd still have to buy the wiring harness, etc., etc. so obviously buying the kit will be much easier but more expensive.
If you had to do it again, would you still buy the kit or attempt to put one together yourself?
Thanks!
J Shuda They are still working and I am pleased with them. For me, the cost to have the kit all put together was worth it.