Hi , I am going to buy one in some days , and I would like to know whether It is bad / average or good for a Chinese moto bike . What are main issues I will encounter with it ? Thanks for a reply .😊
Are there any how too's you would like to see. I haven't been out ridding lately as Michigan weather has turned a little rainy and cool out but I would for sure post any particular videos or things you would like to see of have explained.
Alix Sobh there is a place called Grand Rapids scooter on 36th and Division. Great guy owns it and he and his mechanics are really into motors and doing things the right way. I wouldn’t trust any one else with my scooter.
Nice bike. Bro you gotta upload a startup/drive off type video so we can hear that beast, there's almost no RUclips coverage on these bikes but they seem damn interesting
I'm in GR as well and got a wolf RX50 for my wife and am heading tomorrow to see about getting a beast for me hopefully. thank you for video it gives me a idea of what i'm gonna do to it right off the bat. thank you
all i have to say is if you purchase one from a dealer you should be doing weekly safety checks my nephew bought one and the lights were falling off on his first ride home and a week later he had to tighten down all screws
With a little modification I added the 150cc carb but haven't been able to test drive it yet due to other projects to see if their is a increase in top end speed plus I got the wrong sliders from the scooter shop so I need to hit them up this week and get the right weight.
Now that we got it out and about the scooter easily maintains 45 miles an hour. It's faster off the line with the 100 jet in the 150cc carb and smoother through the spool up with the centrifugal clutch. Still have to put the 7.0 gram sliders in but other than that it's a pretty nice scooter.
My uncle was gonna take me to get a moped for my 1st transportation. Should I get this and work on the speed or should I just by a moped that goes a bit faster
i have a 2020 and have got my up to 45 but that was down hill i can get it up to 40 41 on a good day i want to lower my bike plus put a new card air and cdi on it is it wort it
Go to Cajun maddog, Get a NCY lowdown rear shock to Lower it, 20mm carburetor, red air unifilter, but for now you can even just swap out the ugly box it’s in and have it just with the stock cone it comes with for now, swap the black fuel/vacuum lines with clear ones 3/16th check autozone they have them too. For muffle I would find one you like and then go to a exhaust shop see if they can fabricate something for you with the muffler. Grab a mikuni fuel pump & a fuel filter. I’ve done all these with my 150cc gy6 maddog and went easily from 45mph to 53. Replacing the fuel/vacuum lines & removing your air box are simple mods that will boost your top speed.
I live in Grand Rapids as well, right downtown. We should meet up sometime I’m looking to buy one and I am a young mind in need of some knowledge for upgrading it to suite my size
Austin Deuman yeah dude. Not a problem. Me and the wife live a couple miles from downtown. We usually ride on our days off. So we are out and about. Check out the Grand Rapids hooligan page on face book. It’s full of guys who have tips and tricks.
Without any of the upgrades and modifications that you did, would you consider this a good starter scooter for a beginner? It sounds like it’s crap and you need to mod it to be better.
I have been trying to get the rear fender off, and I cannot find all the bolts and screws to get it off. How did you get yours off and do you have a breakdown for it? I looked everywhere online, thanks!
If someone is to keep it a 50cc so it’s still a scooter what should be changed so it’ll last? And is there a way you know to get this bike to comfortably go max 70km or 42ish mph?
Hey man! Thanks for posting this. I was wondering about the saddlebags. I just bought the 49cc beast. Decided after seeing this video, I want the saddlebags instead of a trunk. What saddlebags do you recommend?
I just picked up a couple mountain bike packs from the local supermarket and we added Velcro straps to affix them and they turned out to work very well.
Jeff Bateman I don't really have that much into it. The machine was 2050. The sliders were 16.00, the dr. Pulley set up was maybe fifty, the carb was 40 I think. The grom plastics were some thing I did just to do but weren't necessary. So all in all it keeps up with my grom pretty well and the wife has the luxury of not having to shift. This is her stepping stone to either a grom or a Honda rebel 500. She is in the process of getting comfortable on this to graduate to some thing bigger.
Used groms around me go for right around 2700 so this was a nice cheap stepping stone and once we are done with it I'll easily get most of my money out of it the store I bought it from re sells them in consignment.
+Anarchy Ink Tattoos AHHH! Didn't think about the shifting thing for beginners! Makes total sense! I would love to have a little Grom to cruise around and run errands on.... How fast are the stock Groms? Thanks again for your time.
Jeff Bateman the groms are a awesome fun time bike! We ride all over Grand Rapids and the surrounding area. Once she jumps up we will get her the full size bike. The grom can do 55 or better depending on the weight of the rider. Gearing etc.
So what exact carb did you use? I picked up one for a 125 and my cable wasnt long enough so it was stuck about full throttle. Had to put the original back on.
M&L Maintenance Solutions I used a 150 cc carb of I think another bintelli machine. I bought it from the Grand Rapids scooter store. They had a new one on the shelf. If I remember right I did have to move how the throttle cable was routed through the frame.
Hey man I am getting the 150 beast and was wondering if it is the same as the 50 as far as the grom fairing and was also wondering if my unit air filter intake kit would work better then the factory air box
Should I buy this or a regular 49-50 CC scooter , I need transportation to work and I need something reliable . Also I'm on a budget of 2,000 please help
Luke Raven I would say if you want a scooter and you are able to tinker with stuff then get one of these. This scooter needed a little tic “out of the box” even though it was new. Bintelli to me isn’t going to be as reliable as let’s say Honda who over time has done a better job perfecting their machines. This is a newer company biased I believe in Florida or California and they import from China (or where ever) So the build quality isn’t quite there. Just my two cents though.
Hey I’m getting be bike this week. I recall you saying you put a big bore kit on it, which one did you and did it make any noticeable difference in soeed
I had the 83cc big bore put on it. I was told they had a 100cc big bore kit but in less then 500 miles I would have waisted the barrings in the bottom end. It's just not meant for that big of a cam. As far as I can tell it does closer to 45 miles and hour so I would have to say it did some thing to the motor. Lol. The other things I did I'm sure all helped. And it was pretty affordable to buy and do myself.
Ok thanks I’m definitely gonna look into that and peel off those horrible stickers. Mine is all black. I love your setup mechanically and aesthetically as well that’s the look I want for mine looks amazingly
Hi there! Thank you for this video. Your wife’s Bintelli Beast looks very nice. I own one as well with Honda Grom parts. My question would be where did you purchase the new pulley? A local dealership has the option to install the 80cc big bore upgrade which I think would be worthwhile as I get up to about 35 on mine with no internal upgrades. How much modification. Was needed to install the carburetor from the 150cc? Thanks, and be safe riding!
KS_2015 I purchased the Pully from Grand Rapids scooters. The install was super simple. Just a few wrenches and it was done in a matter of a couple hours.
Looking to lower my beast I seen your girls and had to have one got one from gr scooter but I'm to short what would I be looking for on Amazon adjustable spring for moped beast....
Amber Goble I believe I bought the rear shock off amazon or eBay. It’s a adjustable shock with a spring I think it said capable of up to 900lbs. I also believe it was meant for a go cart. Hope that helps.
CrimsonCharger I would say the cheap quick upgrades are the clutch springs, taking the pipe apart to get better flow and re jetting the carb. Then maybe drill some holes in the air box facing the front of the bike for better inlet air. All relatively cheap and quick up grades, then try going with the heavier gram sliders to get you moving a little faster as well. I've gone to seven gram rollers and they were a cheap enough step up that the gain was well worth it.
Hey how you doing my friend this is Eric from Ohio and it'll comment on them lights man that I've been telling the kind of sturdy I just ate crap doing like 35 and flew over the handlebars my left light my left foot rest broke and nothing happened to that light that's a study LED light or whatever you call it my friend but I need to know how you did that delete on that muffler can you get back with me as soon as possible thank you thumbs up
DKW CDW Williams the mods I spoke of are all that has been done to it in the video. Other then that it’s mostly stock. There did have to be some tinkering to get the shock to work. I believe I also had to cut the spring down to lower the bike for my wife.
Hey Anarchy! I just bought one of these bikes and I really like it. I am thinking of upgrading it with a 80cc and a bigger scooter carburetor. Have you had a chance to replace the carb on yours yet?
Nicklas Bakov I have added the same 80cc upgrade that actually made it a 83cc motor how the scooter store put it together. I have added the 150cc carb from a scooter and changed the filter to a thinner element in the carb, drilled wholes in the front of the air box to help get more air into it and left the stock #90 jet in it and it has smoother acceleration of the line and better throttle response. Of course this goes along with all the other mods done so far.
Nicklas Bakov so far our average speed with the Wife on it is about 43-45 and she’s only five foot and a little woman. I’m 6’2” 240 so probably not that fast with me on it. I think we can get a little more out of it with the heavier sliders. I still haven’t installed the 7.0 gram sliders. I think I’m still running the stock 5,0’s.
Hi, thanks for the useful video. I have couple of things to ask. I bought a 50cc scooter and I had to sell it off. I am planning to get one of these in span of few days or a week. Do you think, this would be a good investment ? I never owned a scooter or a motorcycle. Please give me a best advice, I saw few comments you have asked to change or modify it, I'll have to find a repair shop to do that. Another thing is, can I ride this on a freeway or interstate ? 55 speed limit or 65 speed limit. I want to get this to mainly use it for work purpose. There is a best price for this 2021 for $1999. I was interested in other scooters like Wolf brand rugby 2 150cc and kymco agility 125cc. Please help. Since, I can see you are a master in motorcycles and scooters.
It’s top speed is closer to 45 so I would stay away from any road that requires maintained speeds over 40 miles an hour. As far as upgrades if you are mechanically inclined they are very easy to do and in most cases require more time than any thing else. It’s a great cheap way to get back and fourth to work and super cheap as far as gas. Light enough to be very maneuverable in traffic.
James Bell I would say carb helps along with the sliders and clutch springs. It’s going to be most of the mods I’ve done and then some potentially. Me and the wife still haven’t got 50mph out of it yet.
@@anarchyinktattoos5926 Weird. The one I've got on layaway, the headlight looks like an evil robotic jester. Wish I could figure out how to post an image here.
Almighty Hendrixxx pretty easy. You just remove the cover and any thing attached to it then the pulley and it comes off, then obviously the reverse to install the new one.
You register it as a moped. The time that will take is up your Secretary of State / DMV office. As far as speed, with all the mods I’ve done we’ve been able to get it up to 43 miles an hour consistently.
Babycornball49 My wife is 5’1” and she rides it comfortably and in Michigan just a drivers license is all you need as it is just considered a scooter/moped.
So far the only issues were the Speedo and gas gauge quit working. But it’s not a big deal we just ride around town so the gas stations are your friend.
Hailey Phillips the can bore them out to 150 I think (not at all sure) but then that’s more stress on the internal parts and they say (where I bought it) the bottom end doesn’t hold up to the higher compression parts.
Hi , I am going to buy one in some days , and I would like to know whether It is bad / average or good for a Chinese moto bike .
What are main issues I will encounter with it ? Thanks for a reply .😊
If you get the time, I would love to see more videos of the grom and the beast. Maybe some how-to's and definitely some riding videos!
Are there any how too's you would like to see. I haven't been out ridding lately as Michigan weather has turned a little rainy and cool out but I would for sure post any particular videos or things you would like to see of have explained.
Hey! I live in Kalamazoo and I want to upgrade the engine with a big bore kit. Are there any places near by that I can get that installed?
Alix Sobh there is a place called Grand Rapids scooter on 36th and Division. Great guy owns it and he and his mechanics are really into motors and doing things the right way. I wouldn’t trust any one else with my scooter.
koooy Carlee I just mounted a camera mount so I will see what I can do.
Nice bike. Bro you gotta upload a startup/drive off type video so we can hear that beast, there's almost no RUclips coverage on these bikes but they seem damn interesting
Oh wait, shit I just realized you got the MI winters. Ah well in the spring then
Will do as soon as the summer decides to come back around lol.
@@anarchyinktattoos5926 we need a video I'll be watching this channel waiting on a update love the bike
Great video...thank you!! You remember what model shock you got from Amazon? Having trouble finding one for ours. Thank you
I'd love the link to the rear shock.
I'm in GR as well and got a wolf RX50 for my wife and am heading tomorrow to see about getting a beast for me hopefully. thank you for video it gives me a idea of what i'm gonna do to it right off the bat. thank you
VapinYoda - FLAK Jackets Airsoft no problem we ride ours all over it’s a fun machine.
all i have to say is if you purchase one from a dealer you should be doing weekly safety checks my nephew bought one and the lights were falling off on his first ride home and a week later he had to tighten down all screws
With a little modification I added the 150cc carb but haven't been able to test drive it yet due to other projects to see if their is a increase in top end speed plus I got the wrong sliders from the scooter shop so I need to hit them up this week and get the right weight.
Anarchy Ink Tattoos yo are you in the Gr area? I think I seen you today at the store.
Everything Possible yes me and the wife are in north east grand rapids.
Now that we got it out and about the scooter easily maintains 45 miles an hour. It's faster off the line with the 100 jet in the 150cc carb and smoother through the spool up with the centrifugal clutch. Still have to put the 7.0 gram sliders in but other than that it's a pretty nice scooter.
Where is the battery located on it
When do you supposed to change the oil on a bintelli beats
My uncle was gonna take me to get a moped for my 1st transportation. Should I get this and work on the speed or should I just by a moped that goes a bit faster
I would say buy what you can afford and learn how to handle it from there then upgrade or trade up as time and experience allow.
@@crawlerspacercllc9982 I did I had this one in blue then I have another in black and it's a 150
I want to know of the bike is too small?
Did you ever so a startup\driving video of this scooter? I don't seem to be able to find one on your channel.
Brian Pepin no I haven’t done one yet I will try to get one up before we put it away for the winter.
i have a 2020 and have got my up to 45 but that was down hill i can get it up to 40 41 on a good day
i want to lower my bike plus put a new card air and cdi on it is it wort it
I believe these engines are GY6, so any gy6 part should fit.
Go to Cajun maddog, Get a NCY lowdown rear shock to Lower it, 20mm carburetor, red air unifilter, but for now you can even just swap out the ugly box it’s in and have it just with the stock cone it comes with for now, swap the black fuel/vacuum lines with clear ones 3/16th check autozone they have them too. For muffle I would find one you like and then go to a exhaust shop see if they can fabricate something for you with the muffler. Grab a mikuni fuel pump & a fuel filter. I’ve done all these with my 150cc gy6 maddog and went easily from 45mph to 53. Replacing the fuel/vacuum lines & removing your air box are simple mods that will boost your top speed.
I believe you said the word "Grom" at least 400 times, lol. Seriously tho, good video. Great info.
Can you tell me what rear shock you used ? My wife is the same size and her bike comes today. I know I’ll have to lower it
Where you get the bag on the back of the bike? I just copped my beast & I love it
It was a mountain bike bag from Walmart.
I was wondering if a stunt cage would fit on one of those on the side at least
panda Tayloe Probably not as the mounting points are different from the Honda groms.
@@anarchyinktattoos5926 I was afraid that was the case
Would you be able to share a link for that exhuast please?
I live in Grand Rapids as well, right downtown. We should meet up sometime I’m looking to buy one and I am a young mind in need of some knowledge for upgrading it to suite my size
Austin Deuman yeah dude. Not a problem. Me and the wife live a couple miles from downtown. We usually ride on our days off. So we are out and about. Check out the Grand Rapids hooligan page on face book. It’s full of guys who have tips and tricks.
Without any of the upgrades and modifications that you did, would you consider this a good starter scooter for a beginner? It sounds like it’s crap and you need to mod it to be better.
Would the Grom headlight be a direct swap with the Beast? Seems like almost everything is direct swap.
I’m sure it would every thing about the front of this bike is the same.
Just go a bintelli beast only do about 30 on 1/2 mile straight
I really never had a motor scooter before can you offer any advice?
This one with the modifications does 43 on a regular basis with the modifications Ive done to it.
I have been trying to get the rear fender off, and I cannot find all the bolts and screws to get it off. How did you get yours off and do you have a breakdown for it? I looked everywhere online, thanks!
This summer I will try to post some simple how too videos but with covid and having to work more hours it will be a bit far and between.
If someone is to keep it a 50cc so it’s still a scooter what should be changed so it’ll last? And is there a way you know to get this bike to comfortably go max 70km or 42ish mph?
Same city lol so all Honda Grom plastics will fit on these bikes
Hey man! Thanks for posting this. I was wondering about the saddlebags. I just bought the 49cc beast. Decided after seeing this video, I want the saddlebags instead of a trunk. What saddlebags do you recommend?
I just picked up a couple mountain bike packs from the local supermarket and we added Velcro straps to affix them and they turned out to work very well.
I’m going to buy this very soon. I was wondering overall would you recommend this over other motor cycle style 50cc bikes for a first timer
It’s a great scooter to get rid of the “ridding in traffic” jitters because it’s easy to maneuver and you can park it any where!
I'm just curious... With all the upgrades (time and money) you put into this scooter, why not just find another good used Grom? Thanks for sharing!
Jeff Bateman I don't really have that much into it. The machine was 2050. The sliders were 16.00, the dr. Pulley set up was maybe fifty, the carb was 40 I think. The grom plastics were some thing I did just to do but weren't necessary. So all in all it keeps up with my grom pretty well and the wife has the luxury of not having to shift.
This is her stepping stone to either a grom or a Honda rebel 500. She is in the process of getting comfortable on this to graduate to some thing bigger.
Used groms around me go for right around 2700 so this was a nice cheap stepping stone and once we are done with it I'll easily get most of my money out of it the store I bought it from re sells them in consignment.
+Anarchy Ink Tattoos AHHH! Didn't think about the shifting thing for beginners! Makes total sense! I would love to have a little Grom to cruise around and run errands on.... How fast are the stock Groms? Thanks again for your time.
Jeff Bateman the groms are a awesome fun time bike! We ride all over Grand Rapids and the surrounding area. Once she jumps up we will get her the full size bike. The grom can do 55 or better depending on the weight of the rider. Gearing etc.
Hey man. Thanks for the vid! What year grom front fender did you get? 14-15?
Zach Joyner Yes I used the 14-15 year grom parts.
I just got one of these in a 150cc it RIPS! I was curious, if you changed out the bulky air box
Yeah I pulled the old one apart and changed the air filter then drilled wholes in it to flow better. Much nicer now.
So what exact carb did you use? I picked up one for a 125 and my cable wasnt long enough so it was stuck about full throttle. Had to put the original back on.
M&L Maintenance Solutions I used a 150 cc carb of I think another bintelli machine. I bought it from the Grand Rapids scooter store. They had a new one on the shelf. If I remember right I did have to move how the throttle cable was routed through the frame.
Hey man I am getting the 150 beast and was wondering if it is the same as the 50 as far as the grom fairing and was also wondering if my unit air filter intake kit would work better then the factory air box
Cody Lewis I’m not sure. We got the 50cc so I don’t know if there are any differences.
Any is better than factory air box
Definitely from MI, he said "Meijer".
What is the first thing to do when you get it? For modifications or upgrades for something
Just little stuff here and there. Nothing that needs to be done.
Should I buy this or a regular 49-50 CC scooter , I need transportation to work and I need something reliable . Also I'm on a budget of 2,000 please help
Luke Raven I would say if you want a scooter and you are able to tinker with stuff then get one of these.
This scooter needed a little tic “out of the box” even though it was new. Bintelli to me isn’t going to be as reliable as let’s say Honda who over time has done a better job perfecting their machines.
This is a newer company biased I believe in Florida or California and they import from China (or where ever) So the build quality isn’t quite there. Just my two cents though.
Can u do a video on the paint job
TRTL Galaxy All I did was tape off what I didn’t want painted then used the spray on plastidip and it worked out fine.
Can y'all do a riding video so I can see how it flows with traffic and the grom
Marvin G that will be a plan once it gets warmer here in Michigan. The summer is trying to come in pretty slow lol.
Ok
Hey I’m getting be bike this week. I recall you saying you put a big bore kit on it, which one did you and did it make any noticeable difference in soeed
Speed
I had the 83cc big bore put on it. I was told they had a 100cc big bore kit but in less then 500 miles I would have waisted the barrings in the bottom end. It's just not meant for that big of a cam.
As far as I can tell it does closer to 45 miles and hour so I would have to say it did some thing to the motor. Lol.
The other things I did I'm sure all helped. And it was pretty affordable to buy and do myself.
Ok thanks I’m definitely gonna look into that and peel off those horrible stickers. Mine is all black. I love your setup mechanically and aesthetically as well that’s the look I want for mine looks amazingly
Hi there! Thank you for this video. Your wife’s Bintelli Beast looks very nice. I own one as well with Honda Grom parts. My question would be where did you purchase the new pulley? A local dealership has the option to install the 80cc big bore upgrade which I think would be worthwhile as I get up to about 35 on mine with no internal upgrades. How much modification. Was needed to install the carburetor from the 150cc? Thanks, and be safe riding!
KS_2015 I purchased the Pully from Grand Rapids scooters. The install was super simple. Just a few wrenches and it was done in a matter of a couple hours.
Is it still considered a scooter even with a big bore kit on it and in turn you need a motorcycle license to drive it on the road?
In michigan any thing under 100cc is considered a scooter. That’s why we went with the 83 cc big bore.
Looking to lower my beast I seen your girls and had to have one got one from gr scooter but I'm to short what would I be looking for on Amazon adjustable spring for moped beast....
Amber Goble I believe I bought the rear shock off amazon or eBay. It’s a adjustable shock with a spring I think it said capable of up to 900lbs. I also believe it was meant for a go cart. Hope that helps.
Anarchy Ink Tattoos ty
Hey I have one the same style but the speed it's only 50 how can I fix it for more speed
If you want more speed one of your main options are going to be the big bore kit and the mods Ive done to it.
Also what do you recommend be my first upgrade for this
CrimsonCharger I would say the cheap quick upgrades are the clutch springs, taking the pipe apart to get better flow and re jetting the carb. Then maybe drill some holes in the air box facing the front of the bike for better inlet air. All relatively cheap and quick up grades, then try going with the heavier gram sliders to get you moving a little faster as well. I've gone to seven gram rollers and they were a cheap enough step up that the gain was well worth it.
What does it sound like make a vid with it
I will try to get one posted this summer summer.
where did you get the plastics?
eBay had pretty much every thing I needed or the local grom groups.
Hey how you doing my friend this is Eric from Ohio and it'll comment on them lights man that I've been telling the kind of sturdy I just ate crap doing like 35 and flew over the handlebars my left light my left foot rest broke and nothing happened to that light that's a study LED light or whatever you call it my friend but I need to know how you did that delete on that muffler can you get back with me as soon as possible thank you thumbs up
What’s the name of the rear shock your using I’m trying to find one also ???
DKW CDW Williams it’s a gocart shock I found on eBay.
Thanks I just fount it. Did you do any mods to make it faster if so can you list them for me. Thanks again
DKW CDW Williams the mods I spoke of are all that has been done to it in the video. Other then that it’s mostly stock. There did have to be some tinkering to get the shock to work. I believe I also had to cut the spring down to lower the bike for my wife.
@@anarchyinktattoos5926 Can I get a link to that shock???
Hey Anarchy! I just bought one of these bikes and I really like it. I am thinking of upgrading it with a 80cc and a bigger scooter carburetor. Have you had a chance to replace the carb on yours yet?
Nicklas Bakov I have added the same 80cc upgrade that actually made it a 83cc motor how the scooter store put it together. I have added the 150cc carb from a scooter and changed the filter to a thinner element in the carb, drilled wholes in the front of the air box to help get more air into it and left the stock #90 jet in it and it has smoother acceleration of the line and better throttle response. Of course this goes along with all the other mods done so far.
Anarchy Ink Tattoos what is the top speed that you achieve with all the upgrades?
Nicklas Bakov so far our average speed with the Wife on it is about 43-45 and she’s only five foot and a little woman. I’m 6’2” 240 so probably not that fast with me on it.
I think we can get a little more out of it with the heavier sliders. I still haven’t installed the 7.0 gram sliders. I think I’m still running the stock 5,0’s.
Hi, thanks for the useful video. I have couple of things to ask. I bought a 50cc scooter and I had to sell it off. I am planning to get one of these in span of few days or a week. Do you think, this would be a good investment ? I never owned a scooter or a motorcycle. Please give me a best advice, I saw few comments you have asked to change or modify it, I'll have to find a repair shop to do that. Another thing is, can I ride this on a freeway or interstate ? 55 speed limit or 65 speed limit. I want to get this to mainly use it for work purpose. There is a best price for this 2021 for $1999. I was interested in other scooters like Wolf brand rugby 2 150cc and kymco agility 125cc. Please help. Since, I can see you are a master in motorcycles and scooters.
It’s top speed is closer to 45 so I would stay away from any road that requires maintained speeds over 40 miles an hour. As far as upgrades if you are mechanically inclined they are very easy to do and in most cases require more time than any thing else. It’s a great cheap way to get back and fourth to work and super cheap as far as gas. Light enough to be very maneuverable in traffic.
@@anarchyinktattoos5926 Thanks for the tip. I was planning on 150cc, is it the same speed ?
I just got one 💯
after riding it for awhile,,,,, what upgrade would you suggest ,,,im just trying to go 50 or 60
James Bell I would say carb helps along with the sliders and clutch springs. It’s going to be most of the mods I’ve done and then some potentially. Me and the wife still haven’t got 50mph out of it yet.
Big bore kit, bigger carb, high performance CDI
Did you modify the headlight to a projector?
Curt Jenkins Nope, that’s how it came stock.
@@anarchyinktattoos5926 Weird. The one I've got on layaway, the headlight looks like an evil robotic jester. Wish I could figure out how to post an image here.
How easy is it to change the drive belt?
Almighty Hendrixxx pretty easy. You just remove the cover and any thing attached to it then the pulley and it comes off, then obviously the reverse to install the new one.
I'm going to buy this for my next bike how fast is it and can you get it registered?
You register it as a moped. The time that will take is up your Secretary of State / DMV office. As far as speed, with all the mods I’ve done we’ve been able to get it up to 43 miles an hour consistently.
@@crawlerspacercllc9982 what mods have you done??
@@sarahfrench9309 There has been a bunch I talk about in the video.
@@crawlerspacercllc9982 oh sorry, didn’t realize this is the posters account, sorry
I just brought one and I want to make faster so I can I do it
Can you give me the info to get that from front fender please
*Grom
CrimsonCharger it's a Honda grom 14-15 stock front fender I picked up off eBay for like 30bucks or so.
Thx
could i 5ft tall women ride this bike comfy ? what kind license do you need to ride this bike in Michigan ?
Babycornball49 My wife is 5’1” and she rides it comfortably and in Michigan just a drivers license is all you need as it is just considered a scooter/moped.
I want for. Take in my 18 wheeler
Any issue with this thing in traffic ? Is it too slow
MitchSquad with the mods we’ve done we ride it to work from down town to work on 68th and Division all the time it keeps up with traffic great!
So... you gutted the bintelli and filled it with Grom parts. Got it.
Looks like a gutted bintelli.
Dark EdgeLord nope not at all but no point in arguing you clearly don’t know what your looking at.
can U make a video how to upgrade the Bintelli beast 50cc to 100cc..? Thanks
Tiffany Cheng I didn’t do that upgrade. That was done at the dealership.
Any problems with it
So far the only issues were the Speedo and gas gauge quit working. But it’s not a big deal we just ride around town so the gas stations are your friend.
Can you bore it
Hailey Phillips the can bore them out to 150 I think (not at all sure) but then that’s more stress on the internal parts and they say (where I bought it) the bottom end doesn’t hold up to the higher compression parts.
top speed?
yang mills It does about 43 miles an hour now.
@@anarchyinktattoos5926 way too slow.
Thx was looking at the 150 version and now I know their bikes are crap.