If the front tires look like the rear tires; I would just rotate them and get all I can out of them. If you buy new tires I personally would stick to the same size on all four. If you stagger them; you cannot rotate them. If you put bigger tires; it may affect your mileage. It is like if you wear New Balance shoes and then switch to work boots. More energy required. As far as the dings in bumper go; use touch up paint. Do 3 or 4 coats over a few days. You won't even notice it. The car looks and sounds great. Hopefully this helps and not just in 1 ear and out the other. LOL
If you're sticking with your stock foundry rims I would put on 255/35-18 all around if you're going after upgraded rims I would go with a 19x8.5 in the front with a 245/40-19. And in the rear Go with a 19x10 with a 265 or 275/40-19. That set up tracks perfect with no alignment needed. Also no speedometer adjustment.
Anything made by Borla is is gonna be great quality. The S-Type is perfect for this 3.7 because it's loud and has a slightly deeper tone than the ATAK series. Bbk shorties deepen it a bit. The down side to Borla is the price. But 100% of people who have them will say it well worth it.
Those Goodyear’s are garbage, I kept them on since I didn’t want to buy new tires. I saw you got new tires from your other video, I hate Goodyear tires though, absolute trash.
Do you guys have a tire ( or tire/wheel) combination that you think i should get?
Please tell me you suggestions!
Nice I have a set of 20's with Nankang tires they are super cheap and have a long tread life
Did acceleration get affected when you went with 20's? I'm assuming you have a v6 too
No I’m running 20x10 on the rear 285/30/20 and in the front is 20x8 255/35/20
V6 sounds great!
If the front tires look like the rear tires; I would just rotate them and get all I can out of them. If you buy new tires I personally would stick to the same size on all four. If you stagger them; you cannot rotate them. If you put bigger tires; it may affect your mileage. It is like if you wear New Balance shoes and then switch to work boots. More energy required. As far as the dings in bumper go; use touch up paint. Do 3 or 4 coats over a few days. You won't even notice it. The car looks and sounds great. Hopefully this helps and not just in 1 ear and out the other. LOL
I could adjust the issue you are talking about with my tuner
I added some nice Hancook tires to mine
check out the Shelby on Ebay there are good deals there as a package
If you're sticking with your stock foundry rims I would put on 255/35-18 all around if you're going after upgraded rims I would go with a 19x8.5 in the front with a 245/40-19. And in the rear Go with a 19x10 with a 265 or 275/40-19. That set up tracks perfect with no alignment needed. Also no speedometer adjustment.
Costco sells tires
Bro try tire rack there prices are great
Have u been rotating, the tires as recommended.
Nitto tires make a radial tire, a good ride is Michelin tires
Longevity Good years.
I have been getting them rotated
Hey man I’m about to get a 2016-17 mustang v6. What’s your exhaust setup?
Borla s type axle back with bbk shorties
Quick Drive! Do you recommend it? Also do you just hook the axle back to the regular exhaust? Thanks.
Anything made by Borla is is gonna be great quality. The S-Type is perfect for this 3.7 because it's loud and has a slightly deeper tone than the ATAK series. Bbk shorties deepen it a bit. The down side to Borla is the price. But 100% of people who have them will say it well worth it.
It’s camber wear. Just get it corrected and you should be fine.
Those Goodyear’s are garbage, I kept them on since I didn’t want to buy new tires. I saw you got new tires from your other video, I hate Goodyear tires though, absolute trash.