Worlds Fastest WLTOYS 124019 Project 120
HTML-код
- Опубликовано: 22 янв 2021
- Want to make the Worlds Fastest 124019? Here's what we used in the build of the ultimate wltoys 124019 'project 120'. Get Your Very Own WLTOYS 124019 Right here - www.banggood.com/custlink/KGG...
Get The Gensace 3S Lipo Right here - bit.ly/3rvexpn
Get The Wheels/Tires Here - bit.ly/37W6PNj
Get The Motor Bracket here - www.banggood.com/custlink/DG3...
Get the Radio Here - www.banggood.com/custlink/mD3...
Get the Power Hobby Hex bits here - www.powerhobby.com/pht005-1.html
Get 11000Kv Brushless Motor Here - ebay.to/3ocMB6S
Get A Mamba X Here - bit.ly/3f0lt6G
Buy The Best ESC & Motor Extension Leads Right here - www.ebay.com/itm/153961222007
The RC Gear We Use: -
Power Hobby GNSS Speed Meter (Used in our speed tests) - www.powerhobby.com/powerhobby...
High Quality Batteries we recommend for power and speed: -
Get Awesome Gensace Batteries here - genstattu.ositracker.com/1931...
Get Powerhobby Batteries Right here - www.powerhobby.com/batteries-...
Cheap Batteries For Bashing: -
2S - www.banggood.com/custlink/mDv...
3S - www.banggood.com/custlink/DGv...
4S - www.banggood.com/custlink/333...
6S - www.banggood.com/custlink/KKm...
1-8S Battery Charger (400W) - www.banggood.com/custlink/DGG...
Lipo Checker (Full color) - www.banggood.com/custlink/GvG...
The Servo's We Use: -
25KG Metal Geared Waterproof Servo - www.banggood.com/custlink/vGv...
1/5 Size Servo - www.banggood.com/custlink/m3D...
Best RC cars Under $100
1. WLToys 144001 (40mph!) - www.banggood.com/custlink/vmm...
2. WLToys 124019 (43mph+) - www.banggood.com/custlink/KGG...
3. Q902 - www.banggood.com/custlink/Dvv...
Best RC Crawlers Under $200: -
1.) HobbyPlus CR24 G-Armor - bit.ly/3rws4Nt
2.) RGT136161 - www.banggood.com/custlink/3KD...
3.) Redcat Everest 10 - bit.ly/36ng2xr
Buy The Best ESC & Motor Extension Leads Right here - www.ebay.com/itm/153961222007
Like It? SHARE, SUBSCRIBE & HIT THE BELL - ruclips.net/user/Driftomaniac...
To get a great deal on Traxxas Cars Contact Nor-Cal Hobbies on 408-293-5555 or e: CustomerService@NorCalHobbies.com
Want to send something to Driftomaniacs to review and see it on the channel? Contact us via the link on the 'about us' page
Music: www.bensound.com
#RCCARS #WLTOYS #WLTOYS124019 #RCINSANITY
put 6s in there just for a laugh!!
bye bye diffs haha
He s using castle🤣
Yes
HELLO KEVIN!!!
Tumble Wumble
You could at least wait for me to get to 100mph before moving the goal posts hahahaha. Look forward to the first run! I have a feeling you'll need your Private Pilot License first!
Not much chance of us getting up to that speed until we get some better weather in the UK, but it will happen as both of our cars are very similar in spec bring it on
Great job putting that "speed monster" together. Can't wait to see it run in your next video! Thanks Richie!
That freakin quick mr Richie 👏👏😁
Richie, that thing is insane dude! Looking forward to seeing the results 😁
You got alot of competition Matt! Better hurry lol
@@daytonarob-rc4402 haha, slow slow steady mate 😁 I've got a lot planned! You'll see this week
Ohhhh man! You've built a wheeled bullet.👍🏻👍🏻👍🏻
Nice one Richie. Should be Crazy Fast...lol.. Video of my set coming soon. Thumbs up bro.
Awesome build,can't wait to see the runs
That's a cool screwdriver Richie. Very unique.
Cheers from the U.S.! I just got into these cars and nobody I've seen is doing more with these, or offerering better info on them than you. I'm also an RC noob, so you're saving me a ton of time and frustration. Bravo, good sir! 👏 Thank you x 10!
Stan any questions no matter how silly ask away, it's better to ask than get it wrong and fry something
@@DriftomaniacsRC Much appreciated!
I’ve been waiting for this video all week!! Thanks for the insanity!!
Your a Mad Man...hey thanks
love the projects
Richie One tip, make the motor cable shorter as you can, i thought my motor was broke becouse of too long cable
That motor looks awesome
I can't wait!
Looks like it going to hit some big numbers
Love that Dumbo. Just got one for my mini q monster build!
Looking forward to this one mate it's going to be insane 💪 😎 thanks for the shoutout! 😊
No problem 👍 did brief test on 2S, but rain stopped play, it's rained for 5 days non-stop, it was supposed to clear today but still raining out there. Wish I had your weather! I've ordered a new chassis and driveshaft to convert my 144001 to one of these as it's so much easier to work on with the extra room. Anybody make any 'funky' car bodies for the 124019 as yet? Not a speed run one just a nice looking shell
Really cool channel
NICE!!!
What model servo is that?
Also got a link to the electronic screwdriver?
Nice 👍
that screwdriver is sooo china, im literally blown away
Can't wait to see that crazy beast crush 100mph!! Maybe fit some lead weight to the front end to help keep it stable and not flip up. Good luck Rich.
You make me smile🙂
taking this car to extreme speed levels is very cool... but it would be nice to see someone take this car to a top level racing buggy also...thanks
Glad I'm not the only one that has to take stuff apart multiple times during a build, that mini q tested my sanity. Still have a zip tied jumbled mess of esc clutter I just have to mash that bonnet down and pray the magnet latches. Lol
Hi, do you recommend any 2s gen ace batteries that fit on the Wltoys 144001? Thanks.
Hey Richie learning so much from your vids! I'm about to start my build. I noticed you servo zip ties locking mechanism is underneath the car. Worried at high speed if hit by a rock they can snap off. Thanks so much and keep the awesome videos coming.
This is cool! I'm building an A979 chassis stretched using the 144001 driveshaft. The a979 is narrow enough to fit old pan car 1/12scale car body's and is so light weight should do well over 100 mph on 3s lipo. I don't expect the diffs to last forever and I have to shim the bearings etc. Build tolerances on the A979 are a bit loose but I can make it work.
I can't wait! I just fitted 2 motors in my 124019, I don't think the kv I'm running will top 100mph, but I wanted to see how it does since no one I can find has put 2 in a 1/12 car, I can fit them in the 144001 also, but need side trays for both. I laid my escs on thier side, and it worked out well.
One benefit of 2 motors is that you can gear up. Try larger pinion gears and/or smaller spur gears. The rpms of the motor dont matter all that much if you have twice the power behind them and proper gearing. High rpms don't matter if you don't have the power under load to actually reach anywhere near maximum rpms. That's why higher kv often doesn't actually mean a faster car. Having two motors actually allows you to overgear even higher. Theres a reason that none of the fastest speed runs have been done with high kv motors. They are generally done with high voltage and low kv motors. 2 motors for speed runs is actually not unheard of either.
Insanity working overtime...in a good way, of course.
Hi richie i cannot find tje right servo for my wl. I try to use yor links but i only find 25 and 60kg!!
Great one Rich can you put a link to the savox servo you use in wltoys 124019 thanks .👍👍👍👍💯💯💯
Scrolling for action, but there is no action
Have any problems getting the servo to center?
Dam I wish I could afford one of those...I wanna try it so bad
A motor swap amd suspension adjustments really doesn't need to be a two part video. Feels like your dragging it out on purpose instead of not having time because it's such a major undertaking. If it was gonna be two parts there should've been way more bench time in this first video. The way this video is rushed through their should've been a few mina of road testing even if you didn't go for the record in it. Love your content and don't mean to insult you in anyway just wanted to give honest feedback.
Come on bro....hittt 120mph
Can't wait to see the speed run. Where did you get the gyro power screwdriver from. Cheers
I would like to know as well
so you must buy that remote to go brushless?
Richie, I have a question for you. So when I place the MOD 1 gearing using the Traxxas 6492 29T pinion the center spine is not wide enough for the gear??? Can I or should I place the center spine back on? Is it critical for a speed run? I don't really want to grind away at the gear for proper placement?
Looking forward to seeing how she runs as my car is the same spec motor although I have a new spectrum firma esc going in just need some goog weather in the UK and a lot of tarmac lol
Raining here in California today but -8C at my parents in the UK tonight! Oh and yes you’re going to need a lot of room! Like double what you think!
my mate zip tied his emax haha ...thats is going to go some rich ;)
Didn't know you were a fellow Brit 🇬🇧? 😊
What driver are you using?
is the stock servo is enough?
Where did you get those aluminum wheel hexes. I bought a set from Banggood but the pin that came with them were too small for the 124019. Thanks
Let me double check as under COVID I’ve bought a lot on eBay and Amazon as well as Banggood. Also if you’re in the USA then LC racing have a store over here and as the wltoys cars tend to be lower cost copies a lot of the parts fit and arrive very fast. I bought about a car loads worth of spares inc a set of pins and screws(devil to get anywhere else!)
@@DriftomaniacsRC I looked at the LC racing hexes, they use a grub screw to to attach to the axle. The WLTOYS looks like a plain aluminum hex with a certain diameter pin. The hex I bought has a different size pin than stock WLTOYS.
THATS POWERRRRRRRRRRRRRRR OOO
Nice tires. What kind ???
Another great build Ritchie. Have you considered 3d printing side skirts and rear diffuser to use ground effect that was so successful formula 1 banned them cause it worked too well?
I had to register my 124019 with the FAA after it went airborne from uplift of the top speed. Doubt you will be faster than that.
are you serious? or is that tongue in cheek
Hey where can I get that gyro screwdriver a link would be greatly appreciated
Can u do a comparison of kv on a 1/8 monster truck
What are the stearing knuckles are good for? Can you add a link ?
I have a tmaxx electric conversion and it has a goolrc 2600kv motor with goolrc 120A esc
" stop waffling, more action " (said Kevin Talbot)
doh, just as I was going to bed!
what gears did you use?
What is the size of the droop screws? Anyone got a link?
Where is the screwdriver with clutch link please???
What dose the timing do
Have you a link for that servo cheers
Sorry a bit off topic not sure, but maybe someone can help. My 144001 front wheels dont turn, no power at all rears do though. Could it be the differential?
No worries, It might be the front diff OR if neither is turning it could be the gear (at the front) on the center driveshaft that's the issue (Held on by tiny screw but can come loose)
@@DriftomaniacsRC ok cool yeah maybe the center gear shaft has an issue I noticed its but turning but the rear wheels do. Haven't torn it down yet. Thank you for your feedback.
I was thinking about doing a no prep drag build..........not anymore 😎
Looking forward to seeing this thing fly past ths camera meeeeeyaaaaaawwwwwww "CAR SOUND" lol
Hello, the motor is recommended with 1 S lipo. Does it work well and without risk for the motor with 3 S Lipo?
I'd spotted that as well and was pretty nervous so I test ran it on 3S on the bench (timing on low) with some hard full throttle blips and it didn't get warm so yesterday I tested on 2S at my test spot to see and it ran cool. I am thinking that it'll be okay as it's barely pushing any load/weight. It began to rain so I had to quit but will try again today
@@DriftomaniacsRC Thanks for the answer I look forward to the 3S test and know the speed ;-)
For the moment it is mounted with a BL Motor 5200 kv I have a Castle 7700 kv but the cables do not fit in the ESC
Well Richie i finally got a brushless set up but ita not working right. The whole system is glitchy and cannot seem to make it work right. I need help. Look on my channel what i installed.
I'd probably try 2s before going 3s. Then 2-2s in parallel. But your crazy for doing amazing build. Keep it up rich. Your great at what you do. Hope it don't rip apart on take off
Why would you do 2 2s in parallel? The weight and space constraints makes that not a viable option. Single 3s or 4s is the way to go
@@roberttruesdell6151 on that many of will draw about 80a. Gogitr yo hey full use of the motor would take 2 batteries
@@walteradams9712 what?
The discharge of the battery can only be so fast. We know it as the c rating. To get more amps to the motor you need higher c rating. The easiest way is to run batteries in parralel. I've ran my wltoys 12429 at 6900kv motor with 3s at 42mph but with 2-2s in parralel it gets 48mph. Sorry it took so long to respond
11000 kv wow
Droop screws are for limiting suspension travel and not really meant to lower a car. You should always lower the RC using the adjustable spring perches.
But on this car that would effect the spring rate which is not what I need though I appreciate the tip though. Bear in mind this car is set up for speed runs not normal use.
What is the price of all these components together?
What is the weight of the vehicle?
As it stands today the world speed record is at 145mph.... so.... any update?
11000 or 1100kv?
If you went to finer pitch, it will only help speed. Finer gears are more precise, so less noise, and thst means less wasted energy. Back in the day, the 1/10 racers even used 64p gears to have better gearing adjustment, and better efficiency and performance. This had to be used on the cleanest surfaces, however
WWWOOOOOOOOOOWWWWWWWW
how much is that silver screwdriver
Why such a low kV?
Lower Kv is faster
Is this 124019 waterproof?
I'd go on the side of splash proof, I've not got it super wet but I've been out in the wet/rain without any issues.
@@DriftomaniacsRC just got 1 the other day and took it out for the first run in snow 😠 and now it wont run the esc light still comes on i was wondering if i messed it up from the snow thank you i love watching your videos
Tengo uno quiero ponerlo más rápido si me mandas la dirección para qué lo pongas otro motor y o tiro sistema cuánto codras para ponerlo como Llo lo quiero
Now that thing looks super BEEFY....
Why didnt u leave the sidewinder4 in it
I have two! at the end of the video I showed both including the one with the SW4 still in it.
So do u think it will run with the 3.5t surpass hobby rocket wirk in it im new and want to have close to the same car as u i just dont know witch of the two motors uve used to buy. What do u suggest?
I also already have the car and sw4 ps this is my first time trying to do any big mods
Lol I'm guessing the 6 thumbs down is the people whose top speed you r beating😎 😁🤘 I'd love to get one of these but customs always send my packages Bak and Banggood just say to retry over and over and it takes over a month to get rejected so I gave up trying. And been trying to find a second hand build somewhere that I can get part in the usa for it. It's my only option i guess.
Thanks 👍
I suspect you'd probably be far better off running 6s on lower kv.
- Firstly and most importantly you could use a 6s ~1300 battery for a racing quad (firmly believe this is where the highest performance lipos are). 4s ~1500 is a close second. RaceDayQuads OEM packs are good value and excellent performance. Tattu R-line and GNB are also good options but I don't know who stocks them on that side of the pond. If you want power in a small package you need racing quad packs, difficult to explain the gulf in performance vs what you are using. 10000000% you need a couple of these to test.
- Secondly although in theory lower kv doesn't equal more torque that will not be true if the rest of your system is under high stress. Your motor might be able to take 100s of amps but the wires and connectors you use will experience significantly lower performance if they are pushed far beyond their current specification. More so as heat increases.
- thirdly 6s wltoys is way better clickbait
SO WHERE'S THE TEST VIDEO LIKE ???? VERY NEXT VIDEO YOU SAID...!!!!
No way's 11,000
Cool video. Remember you can buy parts for the LC racing EMB 1 most will fit the 1440091. I have videos highlighting that and showing my drift build please check them out.
The guy at the hobby shop told me these are trash and cheap I bought it anyway😂
Man does a line of heroin before every video
Ikr
Project 120 is a big fat zero