I love that the aspect ratio of the video leaves room for the title and control buttons so that they don't block the video, just came from some other guys video and had to install a chrome extension to disable the RUclips UI to even see what he was doing.
Thank you for the tutorial! It's clear to understand the entire process and your advice on the way are straight to the point! It truly helped me a lot!
Hi @david tomic thanks so much for the video, very helpful. I would love some help by bringing down my design to floor level. Do you mind to give me some guidance? Thanks again 😊
Hello wonderful tutorial. Thank you so much. Love your home design. ou blew me away with objects>water>water-cube....would have never thought. I have a very large scale project that I imported from SketchUP and my water surface is actually square but more of a lake size 25x25m and underground, think quarry lake. I am totally new to Twin motion 23 dabbled around with the older version but could not really fathom the horizon city and UI. My ultimate goal is to bring my project into Unreal Engine 5.3 As I work in the old SKU19 the Datasmith direct link isn't working ( I was told by someone direct at UE customer support, thank you) In my FBX imported file my water surface shows downwards to the depth instead of to the sky, and I have floors that don't show at all and floors that show where they are not supposed to be. I have over 2500 groups in my project and 4.5 million faces 580 materials and 430 textures. Its 9 floors up under a dome and 7 floors down underground into the lake. I have a stainless steel circular overhanging roof that only shows the chrome from the street up but is like in existent from a drone view. I will go back and try "two sided" with the hope this will resolve the issue Once I had it all loaded into Twinmotion I am at a loss to single out anything I have 32GB ram. Would you recommend to explode and "ungroup" everything before importing ? Thank you again Mate from Canada
Hi! I haven't used TM yet but it looks great. Im a drafty located in Dunsborough. Just wondering if all the materials, furniture and trees (not the grass tree as you have purchased them) but is everything else in the librarys standard to TM that you have used. Or do I need to purchase these. Thankyou
Thank you so much ❤ but What about render ı can not take render because program gave wonder about path tracer. when ı watch your video ı saw ıt also you can not take render ?? How can ı take render from mac
Mr David. Architecture passionanist of Archicad student here from University. Khwezi am and I need a Course of Tuturials on "How to understand & use Archicad Curtain wall Tool" (I know bit how use it but in order be good something need understand it setting so such is my aim). I'd Love if did one for us your followers sir!!!
Hi. I have a question. Do i have to import a project from SketchUp or similar softwares? Is it possible to start a project from Twinmotion itself without having to import a drawn project?
Hey, first of all: thanks for the tutorial. It is my first try with Twonmotion. I have a question... The modell was uploaded without shadow, how do I fix it? Or did I forget something?
Hi David! (working out of TwinMotion for Revit) If I apply a material to one item, it changes all items associated with the base material, is there a way around this in TwinMotion without going into the Revit file and changing the base material on each element?
Hi David. Thanks for the great tutorial. I'm new to Twinmotion. I noticed you have Australian trees in your library. How to I get them for my renders. Cheers Mark
Looking at your project on my own computer, I had a question. Were all the assets made in Twinmotion, or did you use another 3d software and import it over?
So i am guessing this is for setting up a scene to render, not so much for modeling the structures, so i guess we still need to model our objects in a separate software and import it.
Correct. I do have the Timelapse for this exact model creation in archicad as well and many other full tutorials of model creation even into twinmotion
Hi mate, really appreciated for your video. I learned a lot from you. By the way, in the process getting street view picture and transfer to HDR, i followed your instruction on this video but the image i got was curve and look like 360 view of the picture on google map street view. Can you do another video about that and how to change size or scale of the HDR image after input to twin motion? HUGE THANKS. Liked and Subscribed!!!
Hey mate, I haven’t used this trick too many times because the results aren’t always amazing. I’m looking intro custom HDRI map creation from 360 pano images, once i figure it out, I’ll definitely be sharing with you :) Thanks for subscribing means a lot!
@@DavidTomic thanks for the reply, if I use twin motion linking archicad with data smith, would i be able to render a top view in archicad, with objects added with twinmotion i.e trees etc? I’d use twinmotion exclusively however my assignment calls for a top view render also
@@ZAKarchitects M3 is the next Apple Silicon upgrade with its predecessors, M1 and M2. The path tracer should have been a part of M2, but it didn’t make it for the release.
You should make "beginners" understand WHAT the nature and function of this software is. You are simply importing a image and then work on it. What about beginners that want to create their OWN images for the rendering? You do not talk about that, so beginners do not realize, that this software here is only for rendering, and if it is also for creation of images in itself, then start there.
im a second year architecture student. thank you for this super fast and thoroughly covered the basics of twinmotion. i like your accent as well!
Glad it was helpful and best of luck! You’ve made it through the hardest year
I love that the aspect ratio of the video leaves room for the title and control buttons so that they don't block the video, just came from some other guys video and had to install a chrome extension to disable the RUclips UI to even see what he was doing.
This is pure luck, definitely no planned haha
Highly appreciated as always Mr Tomic, keep up the good work and keep them coming.
Young 🇿🇦 who aspires to be a great architect
Thank you for the tutorial! It's clear to understand the entire process and your advice on the way are straight to the point!
It truly helped me a lot!
Glad I could help
Out of a million twin motion tutorials,this is the most helpful fr
Thanks!
The best twin-motion tutorial I have seen out everything on youtube !
Bravo David!!!
You changed my perspective to swap 3ds max to twinmotion after 20 years useing it.
damn that's a big change! haha glad I could help :)
The grass is so good!
Thank you sir, hope you also share detailed video for rendering
Which will include things to remember while importing
enjoyed it and benefited from all the info you talked about, many thanks for sharing the knowledge.
Thanks bruv. My Twinmotion Journey starts today.
Wishing you all the best mate!
Really impressive tutorial, thanks David!
Enjoyed the tutorial! Very informative video Mr Tomic. Thanks.
Welcome mate
Such an amazing video! easy to understand, comprehensive. wish you make a lot of twinmotion tutorial
Brand new series just dropped. Hopefully this is exactly what you’re looking for.
great tutorial. clear and straight to the point.
Thanks mate
Hi @david tomic thanks so much for the video, very helpful.
I would love some help by bringing down my design to floor level. Do you mind to give me some guidance?
Thanks again 😊
Cmd+7, change the levels
ok lets go!~!!!!!!!
hey David, how can you import project from archicad 2026 to twinmotion 2023? can you please make a video for that?
David, another great tutorial, a lot of information there. Where did you get your Aussie Grass Trees?
Globeplants I believe
Thanks Mate ! All the resources are really great, I only tried Enscape btw, but I'll give Twinmotion a shot and compare the 2. 💯👍
Give twinmotion a go and be sure to let me know your thoughts :)
@@DavidTomic Will do bro, thx!
Hello!Thanks for the tutorial!I m trying to download the street view 360 but i get a warning for virus.What can i do?
Hello wonderful tutorial. Thank you so much. Love your home design.
ou blew me away with objects>water>water-cube....would have never thought.
I have a very large scale project that I imported from SketchUP and my water surface is actually square but more of a lake size 25x25m and underground, think quarry lake. I am totally new to Twin motion 23 dabbled around with the older version but could not really fathom the horizon city and UI. My ultimate goal is to bring my project into Unreal Engine 5.3 As I work in the old SKU19 the Datasmith direct link isn't working ( I was told by someone direct at UE customer support, thank you)
In my FBX imported file my water surface shows downwards to the depth instead of to the sky, and I have floors that don't show at all and floors that show where they are not supposed to be. I have over 2500 groups in my project and 4.5 million faces 580 materials and 430 textures. Its 9 floors up under a dome and 7 floors down underground into the lake.
I have a stainless steel circular overhanging roof that only shows the chrome from the street up but is like in existent from a drone view. I will go back and try "two sided" with the hope this will resolve the issue
Once I had it all loaded into Twinmotion I am at a loss to single out anything I have 32GB ram.
Would you recommend to explode and "ungroup" everything before importing ? Thank you again Mate from Canada
21:15 Me every time I impress myself with my design decisions
thank you bro! your tutorial is amazing!!!
Most welcome mate
Hi! I haven't used TM yet but it looks great. Im a drafty located in Dunsborough. Just wondering if all the materials, furniture and trees (not the grass tree as you have purchased them) but is everything else in the librarys standard to TM that you have used. Or do I need to purchase these.
Thankyou
A local! Welcome to the channel :) everything comes standard and with the recent inclusion of sketchfab you have more options than before.
@@DavidTomic thankyou! Great to know. It's on my list to give it a whirl
Your chanel is great 👍
can you change the mouse color to red for example and make it bigger please easy to fallow you?
So Helpful! Thank you
Glad I could help :)
Thank you Sir, beautiful tutorial!
You are welcome!
nice video , having stability issue with my twinmotion, could it be cause im using M1 ventura version
Thank you so much ❤ but What about render ı can not take render because program gave wonder about path tracer. when ı watch your video ı saw ıt also you can not take render ?? How can ı take render from mac
Mr David. Architecture passionanist of Archicad student here from University. Khwezi am and I need a Course of Tuturials on "How to understand & use Archicad Curtain wall Tool" (I know bit how use it but in order be good something need understand it setting so such is my aim).
I'd Love if did one for us your followers sir!!!
Thanks so much for this video!
Glad it was helpful!
thanks for the videos.
i am learning twin motion and i really need some extra materials for my library, could you help me with some project files?
Hi. I have a question. Do i have to import a project from SketchUp or similar softwares?
Is it possible to start a project from Twinmotion itself without having to import a drawn project?
There is direct link plugins. So yes you can direct link and sync when you can items without importing a new model every time
Hey, first of all: thanks for the tutorial. It is my first try with Twonmotion.
I have a question... The modell was uploaded without shadow, how do I fix it? Or did I forget something?
Should import without issues, might be a system issue, try checking your view settings to see if shadows are turned on
Hi David! (working out of TwinMotion for Revit) If I apply a material to one item, it changes all items associated with the base material, is there a way around this in TwinMotion without going into the Revit file and changing the base material on each element?
I dont remember the exact step but I remember its possible. Basically you need to make it apply on object instead the whole material
Hi David. Thanks for the great tutorial. I'm new to Twinmotion. I noticed you have Australian trees in your library. How to I get them for my renders. Cheers Mark
Globe plants is were I downloaded the grass trees from and they have a good selection of others too. They’re a bit pricey though
@@DavidTomic Thanks.. I purchased all of Xfrogs library back in 2018 but this for use with 3ds max so I'm not sure if they will work with Twinmotion
amazing vid! cheers
Looking at your project on my own computer, I had a question. Were all the assets made in Twinmotion, or did you use another 3d software and import it over?
House was made in archicad and then imported into twinmotion for rendering only
Putting 3d grass using the scattering icon sometimes doesn't work in large landscape Revit 2025 models! Why?
Too many bugs in twinmotion
Can you set the appearance to 100% easy to read and fallow you? please.
So i am guessing this is for setting up a scene to render, not so much for modeling the structures, so i guess we still need to model our objects in a separate software and import it.
Correct. I do have the Timelapse for this exact model creation in archicad as well and many other full tutorials of model creation even into twinmotion
That would be an idea.
However, from your experience, with the latest Updates, which software makes a more real image, Enscape or Twinmotion?
If your computer is good enough, both are great. Enscape maybe a tiny bit ahead still but not by much
at 25:40 - how do we know what is perfectly in the middle? is this something you just eyeball?
There is usually a line that appears in the middle or you manually find the middle
Loved the tutorial but when did Grunge get to pronounced Grange?
Hi mate, really appreciated for your video. I learned a lot from you. By the way, in the process getting street view picture and transfer to HDR, i followed your instruction on this video but the image i got was curve and look like 360 view of the picture on google map street view. Can you do another video about that and how to change size or scale of the HDR image after input to twin motion? HUGE THANKS. Liked and Subscribed!!!
Hey mate, I haven’t used this trick too many times because the results aren’t always amazing. I’m looking intro custom HDRI map creation from 360 pano images, once i figure it out, I’ll definitely be sharing with you :) Thanks for subscribing means a lot!
Thank you!
Welcome!
Is there a way to set up a 3d top view in twinmotion, similar to what can be done in archicad?
Yeah but it’s terrible quality not even worth trying
@@DavidTomic thanks for the reply, if I use twin motion linking archicad with data smith, would i be able to render a top view in archicad, with objects added with twinmotion i.e trees etc? I’d use twinmotion exclusively however my assignment calls for a top view render also
Can I export my revit project into a twinmotion?
Yes
AMAZING
glad you enjoyed it!
Wow i almost quit using TM because I didn't know how to model the light 💡
glad to hear you're still on board!
Great tuto ! You don't use Path tracer ?
Mac
@@DavidTomic :) Mac...
how to import sketchup file to tm , i did it but it all white color no material
export as an FBX file. otherwise get the direct link from the TM website (I believe they have one not certain though)
where do i download this project?
all the links are in the description
how do you import archicad to twinmotion?
There is a plug-in
M3 will have a PT engine 😅.
What's m3?
@@ZAKarchitects M3 is the next Apple Silicon upgrade with its predecessors, M1 and M2. The path tracer should have been a part of M2, but it didn’t make it for the release.
@@gerardofaustin8156 aha nice.. Thank you for enlighten me
bro just skipped the importing bit
If only Twinmotions HDRI setup was as intuitive as D5 Render. Having to select the hdri and the drag it into the scene is the dumbest design choice.
Or even better if D5 were max compatible haha
You should make "beginners" understand WHAT the nature and function of this software is. You are simply importing a image and then work on it. What about beginners that want to create their OWN images for the rendering? You do not talk about that, so beginners do not realize, that this software here is only for rendering, and if it is also for creation of images in itself, then start there.
Check the channel, hundreds of tutorials exactly like you’ve requested…
Enscape seems to be better. Why don't you make a full tutorial for it?
Might do
D5 Render is much better than Twinmotion
Doesn’t work on mac
Nice video. I have learn a lot from it.
Glad to hear it!
Looks like you really need an extreme good memory, video & graphics card for this... 🫣🫣🫣
You can get away with average hardware but the quality will be similar