Quick cut in after your done and open the door. If you know how to use a brush it'll blend the brush marks too on such a small strip all the way around. Leaving the door closed means you don't have to worry about over spray going past the door or masking anything inside the door. Best way to do it 💯
He has a piece of paper in the inside (Masking), all you do is have it slightly open and you can get the inside edge of the door. I’m a pro myself so I know.
1st idk about that sprayer I'd love to learn more. 2nd to the haters, pull the weather stripping and u can spray the whole door while it's closed no lines at all just have to know how it works
People think this guy don't know what he's doing or something.he does thing differently than me sometimes but he's a very successful painter!. he's just testing a spray gun on his back shed now everyone's the expert 😂
What about overspray going everywhere?? Lemme guess, you brush and roll.😂Nah… you take the weather stripping out and spray it at a slight angle to get the edges.
@@inkstain7193 By the time you mess around masking, setting up spray equipment, removing weather strips, in England that's door stops, etc etc, I would have already removed the handles etc and painted the door and be drinking tea 🤣
I would love to learn how to do this I wonder how easy it is just to put a tip on and just start painting and I wonder if the paint runs after applying I wonder how fast you would have to paint and I wonder how easy it would be to go back over the same spot and repaint it and would it look horrible if you went over it again I would really love to learn this method because I have two walls inside my house I would love to paint but I don't know if the standard traditional paint roller is sufficient or if this is a much better and a lot quicker
If you take the weatherstripping off on the door frame then as long as you spray upwards towards the top of the door and into the sides it will get it all
That’s the only way to spray paint a door , if you leave the door open you will get overspray all over , when you finish spraying you can go back and touch up where is needed .
@@Idahopainter I'm going through a ton of vids to learn about spraying vs rolling an empty home. So many complainers, whiners, and naysayers that haven't ever contributed more than a negative comment. Thank you for making these vids and sharing your wisdom with the world.
I'm guessing he has figured out that you get a significant more amount of traffic when you put a video of the wrong way todo stuff. More traffic = more views. Views=$$$
You don’t need to remove the door. Just removed weather strips and if you know how to spray it will cover to the edge sod the door. Also he masked the hardware and in this video is reviewing a cheap spray unit.
@@jasonvaughn1096 ya right any time you want to move 3 wire bales let me know I've been in the hay business for over 20 years and moved more than you'll ever see in your life
@@jimowens3201 dont want overspray inside, plus he's using exterior paint on the outside, and interior paint on the inside that probably also matches the inside trim color as well. He's a pro, he knows what he's doing.
💯 okay True Confession. I bought a harbor freight sprayer also for less than $200. I've used it for fence jobs and over 6 houses. I made my money off it. But I hear what you saying👊🏼✌🏽
I wonder what you use it for if it can’t spray a door most definitely can’t spray a cabinets. Maybe for the spray tip is to big or the paint is to thick?
The sound alone of that machine makes me want to throw it off of a bridge haha #gracoisking
you have a point
Why doesn’t he open up the door?
Isn’t he gonna leave a unpainted area all the way around the perimeter of the door?
House painter
Yes this is wrong
Quick cut in after your done and open the door. If you know how to use a brush it'll blend the brush marks too on such a small strip all the way around. Leaving the door closed means you don't have to worry about over spray going past the door or masking anything inside the door. Best way to do it 💯
If you take the weather stripping out, it'll get everything.
He has a piece of paper in the inside (Masking), all you do is have it slightly open and you can get the inside edge of the door. I’m a pro myself so I know.
1st idk about that sprayer I'd love to learn more. 2nd to the haters, pull the weather stripping and u can spray the whole door while it's closed no lines at all just have to know how it works
Thanks to watching Chris several years back, I now pull the weather stripping and crack the door just barely... perfect every time!!
Yep
Can’t finish spray a closed door! Leave a beautiful unfinished rim around the whole thing. Then it’ll flash like crazy when you touch it up.
first day?
Haha just bought one of those to spray 800ft of white picket fence, it didn't do bad went through 15 gallons without exploding.
Awesome
What machine u using to paint
People think this guy don't know what he's doing or something.he does thing differently than me sometimes but he's a very successful painter!. he's just testing a spray gun on his back shed now everyone's the expert 😂
Feel like he's doing a bad job on purpose. It's a hoax.
Landlord special
LL here, I would not do that, this in is the slumlord special
What is that ? AVANTI ?
Lmao i have an avanti 821, sounds like it
that xpray machine sounds like disposable !!! one time and that's it 😂🤣
I'm a decorator and usually I paint an inwards opening door with it open !!
What about overspray going everywhere?? Lemme guess, you brush and roll.😂Nah… you take the weather stripping out and spray it at a slight angle to get the edges.
@@inkstain7193
By the time you mess around masking, setting up spray equipment, removing weather strips, in England that's door stops, etc etc, I would have already removed the handles etc and painted the door and be drinking tea 🤣
I would love to learn how to do this I wonder how easy it is just to put a tip on and just start painting and I wonder if the paint runs after applying I wonder how fast you would have to paint and I wonder how easy it would be to go back over the same spot and repaint it and would it look horrible if you went over it again I would really love to learn this method because I have two walls inside my house I would love to paint but I don't know if the standard traditional paint roller is sufficient or if this is a much better and a lot quicker
Just wondering how this doesnt miss behind the door stop?
If you take the weatherstripping off on the door frame then as long as you spray upwards towards the top of the door and into the sides it will get it all
Yep
@@juniorcarmack8741 oh ya we dont really use weather strips in nz so thank
@@kaynify how don’t you use weatherstripping? they come in every exterior prehung door
@@juniorcarmack8741 builders generally wont use it in nz, most doors ali. Idk building just different
She so cute! Lol…. We just bought the little battery powered Graco and it has absolutely been amazing
Chris actually gave me my first! I've purchased 2 more since. Love that handy little handheld guy!
What happens when the battery dies?
@@Idahopainter 🤣🤣 Grab a new one.
Every painter does things different.
Salute to all the dabbing wagons outthere!
So you just painted the door that is shut. That going to look real nice around the weather stripping when you open it up.
Pro Tip: You take the weather stripping out and open the door just a smidge and the edges get painted…..😉
That’s the only way to spray paint a door , if you leave the door open you will get overspray all over , when you finish spraying you can go back and touch up where is needed .
You take the door off to spray. Pro tip
@@troysilver6853 hear hear
Why not take door off to spray
Haha he’s talking to the sprayer. Sometimes we all need a little encouragement
Harbor Freight ?
the little pump that could. Change the tip lol
Looks like a Harbor Freight machine
Always, Always release the trigger at the end of each pass! Always, Always remove hardware. Lose the extension too.
OK
@@Idahopainter I'm going through a ton of vids to learn about spraying vs rolling an empty home. So many complainers, whiners, and naysayers that haven't ever contributed more than a negative comment. Thank you for making these vids and sharing your wisdom with the world.
Take the extension of and use smaller spray tip please 🙏
Bruh this man the most hated person on RUclips and I’m my book that means he must be doing something right. Keep ‘em hating
Of course
That tip size is over killing
How does he paint the edges of the door?
He just did. Remove the weatherstripping and angle the sprayer slightly.
I see a little bit of over spray on the first and second stroke, do they have tips that might make a difference?
A good painter would have pulled the handle off that way if you ever change the style of handle you don't have a unpainted surface underneath
I hate when painters are too lazy to remove door handle sets!
How do you know he’s not replacing it? That doubles your effort, now you need to take your screwgun out twice instead of once
You've fallen to the dark side! Didn't remove the door, the hardware, and have stayed from Graco? BAH
This is likely how he really is, before he just had hours of editing in preparation retakes etc..
I'm guessing he has figured out that you get a significant more amount of traffic when you put a video of the wrong way todo stuff. More traffic = more views. Views=$$$
You don’t need to remove the door. Just removed weather strips and if you know how to spray it will cover to the edge sod the door. Also he masked the hardware and in this video is reviewing a cheap spray unit.
@@sonofamountie absolutely. All of these guys don't know what they're talking about 🫣.
@@Michaelzaermusic yep totally agree with you , they haven't got a clue what they are talking about
Even pros stutter sometimes I personally like saying with the wand
Best sprayer out there.
I'm gonna run out and buy one now 🤣🤣🤣
Maybe LOL
Esas pequeñas máquinas trabajan perfect!
Ya how come the door isn't open to paint the whole door
Because you don’t know how to do it He does and so do I
@@jasonvaughn1096 ya right any time you want to move 3 wire bales let me know I've been in the hay business for over 20 years and moved more than you'll ever see in your life
No need... and I was a serious non-believer until I actually decided to try it. Works beautifully!
@@jimowens3201 dont want overspray inside, plus he's using exterior paint on the outside, and interior paint on the inside that probably also matches the inside trim color as well. He's a pro, he knows what he's doing.
The whole door got painted
Did that sprayer come free with the paint? 😆😆😆 Sounds like a dying turkey.. And sprays like one too.
💯 okay True Confession. I bought a harbor freight sprayer also for less than $200. I've used it for fence jobs and over 6 houses. I made my money off it. But I hear what you saying👊🏼✌🏽
@@archieletsyouknow5508 , @Archie Lets You Know That's not a Harbor freight sprayer, it's a DP. The Avanti airless sprayers are nicer than that POS. 🤣
That's , like.. your opinion man
My opinion
That’s gotta be the dumbest sprayer ever 😂😂😂😂
I wonder what you use it for if it can’t spray a door most definitely can’t spray a cabinets. Maybe for the spray tip is to big or the paint is to thick?
Best painter in the world I wish I was as good as him
U wish u could paint a shut door and what? Get paid before the customer opens it
Till graco don't pay you
Bro why you need an extension. No comprendation
Not better 😂
Dead band on a door?
20 foot plastic hose?
Better than Graco?
Get real.
Aren’t you supposed to open up a door when you fucking spray it so you can get the inside edge and lip
How to paint a door shut in less than 2 minutes
Fired
Geez! Is that a 15 tip? Lol that kids corner airless can’t keep up. Try an 11. Less over as well. Wow
Time for a new pump!
So the door knobs is just too hard to remove?
You paint over switch plates too?
Some real quality craftsmanship there Stud.
Yep, stud 🏋🏼♂️
Pro tip . Remove the door
That door no longer opens once paint dries
Not true
after a half a door and she falls asleep? 🤣 thing is junk. A 390 will do a 75 gallon prime out without blinking
And u have the pressure way down using a huge tip? Wtf 😂😂😂
Yep
Better then what 😂😂😂😂😂
Overspray all over the shingles
Wrong
Phillies honestly your a clown , have you've ever even sprayed before .
Nope
So I fix sprayers and use to paint. 1st don't use a home owner pump and be a contractor and the learn to paint
Wat?
Harbor freight special. No thanks.
That’s not done you have to do the sides what the heck🤪😜🤪😜😱
trolling the short kings
LOL
Sounds like a machine gun. 👎
Paint over door knobs. Really 😆
After taping yes.
They're more then likely getting replaced.
Lmao who pays this guy
gotta have that door open! now you got an outline around the weather strip 😒
He was just testing the machine not painting for a client
False. All of the door gets it Tricks
Wrong. I spray doors on all of the time. There's a process, and you gotta know what you're doing.
He's taken the strip out so the door can be sprayed closed , Jesus bunch of amateurs comments
Not true
Bad job on purpose, make people writing something . he’s making money anyway
Lol
LOL
Hell no 👎. Graco all day long .