Sorry to be so off topic but does any of you know of a tool to log back into an instagram account? I stupidly lost my account password. I would love any tricks you can offer me!
@Marc Jordy thanks for your reply. I got to the site thru google and Im in the hacking process atm. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
@@BoxAttackik this is an older video, and i love this idea, i did something similar, but i used an exacto knife, and just carefully went around the window, and just glued the new window on top of the remaining parts of the window that are hidden, it looks mint now!
I know this is an old video, but with your guide I restored a $140 box lunch exclusive blue eyes white dragon back to its $210 glory. The window had been stabbed through with a knife narrowly avoiding the pop and sticker when I bought it, can’t thank you enough
I just ordered a Percy de Rolo from ebay with a pretty messed up window but it was soo cheap I had to get it. This technik was my first idea to fix it, im so happy that I found your tutorial
The only bit of advice I would give the RUclipsr and everyone else out there reading this comment. When you're removing your window from your cheap pop.. literally open up the box down the side .. it opens up the box completely and it makes taking the window off so much easier.. Besides that, great video, great advice! Keep it up
this video is great. i just purchased a jason david frank autographed tommy pop but i love the new power rangers 30th anniversary green ranger pop so i want to swap the window to the new pop and this video is going to help me do so. thank you!!
Can the same Funk Pop exclusive, but from different countries, have different stickers? I am seeing some Emperor Palpatine holographic exclusives. Some are different. Some has the sticker of 14+ for the age, and even underneath the box as well.
Have you tried lighter fluid to remove the window thats an old toys collector trick to remove stickers off of boxes without leaving residue or stain on the box.
Why not buy a film acetate on school supply stores? Cut it the same size of the damage funko film and glue it on your box. You can also heat up the film on the side same process that you did on the sticker. 😀😀😀
question..... My brother attended D23 Expo 2019 and he gifted me one of my all time grails, Mr Toad (SDCC 2017 1500 piece limited edition) from a vendor Fugitive Toys. However its legit and in mint condition but its missing the sticker but it doesn't seem like it was removed. I have reach out to the vendor but no answer yet. What should I do?
@@tothepanels Shoot man because it says LE 1500 it might be harder to find a legit one. I mean some has like a replacement sticker (not real) but close to it. But I rather have the real thing.
I NEED HELP! I've just noticed that quite a few of the windows in my Funko Pop boxes no longer have a straight edge. Theyre actually rounded out and have lost the straight edge. Almost like the corners of the windows have bubbled out. What causes this and can it be fixed without doing a window swap?
This dude deserves way more recognition for the videos he puts out
Thank you! Just started a couple of months ago! Tell your friends! Appreciate it!
Sorry to be so off topic but does any of you know of a tool to log back into an instagram account?
I stupidly lost my account password. I would love any tricks you can offer me!
@Johnny Abdullah instablaster :)
@Marc Jordy thanks for your reply. I got to the site thru google and Im in the hacking process atm.
I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
@@BoxAttackik this is an older video, and i love this idea, i did something similar, but i used an exacto knife, and just carefully went around the window, and just glued the new window on top of the remaining parts of the window that are hidden, it looks mint now!
I know this is an old video, but with your guide I restored a $140 box lunch exclusive blue eyes white dragon back to its $210 glory. The window had been stabbed through with a knife narrowly avoiding the pop and sticker when I bought it, can’t thank you enough
I just ordered a Percy de Rolo from ebay with a pretty messed up window but it was soo cheap I had to get it. This technik was my first idea to fix it, im so happy that I found your tutorial
By far my favorite pop collector youtuber, keep up the good work
The only bit of advice I would give the RUclipsr and everyone else out there reading this comment.
When you're removing your window from your cheap pop.. literally open up the box down the side .. it opens up the box completely and it makes taking the window off so much easier..
Besides that, great video, great advice! Keep it up
this video is great. i just purchased a jason david frank autographed tommy pop but i love the new power rangers 30th anniversary green ranger pop so i want to swap the window to the new pop and this video is going to help me do so. thank you!!
And use gel glue to avoid running . You can also use foam probably shape to help push clear onto the box once set .
If you want to get creases out of the box you can iron it but make sure the iron isn’t too hot, it has to be warm but not that warm
Thank you so much. My signed Naruto box got wet and this is gonna help me a lot.
By far one of my favorite youtubers, keep up the good work man
Thank you’
This video is old but thanks so much. Helped me counter a crappy mecari pop
Nice! Anyone know where I can find a big plastic window like this for bigger boxes?
Love all your videos man thank you
Shame there isn’t a company that can supply clean replacement windows for Funko pops
You can use low contact blue tape to minimize glue run onto clear face
How about using a glue stick instead of the super glue cuz won't super glue wrinkle the cardboard on the box from being wet?
I used gorilla super glue I find it much easier and quicker. Just have to be careful with it.
“You’re done son” 😂😂
Where can you buy the plastic were the pop is in? I have some with no plastic protection on the inside.
So say I have an autographed funko. I want my other one to be autographed. Can I do that?
Im going to tell all my freinds to subscribe to you because you deserve it
Thanks!
No need to thank me. You do quality videos and deserve it
Can the same Funk Pop exclusive, but from different countries, have different stickers? I am seeing some Emperor Palpatine holographic exclusives. Some are different. Some has the sticker of 14+ for the age, and even underneath the box as well.
Have you tried lighter fluid to remove the window thats an old toys collector trick to remove stickers off of boxes without leaving residue or stain on the box.
thanks for the tutorial. any suggestions on getting creases smoothed out on top lids?
Aurelio Medina put your iron on low and put it on their but don’t be to rough and flaten the box out like he did while putting the sticker on
@@DrEthan696 yup iron
Just did this for my Finn pop (adventure time)
works great! Scary but it works
I’m about to do this and it’s so nerve racking I pray I do it well
Why not buy a film acetate on school supply stores? Cut it the same size of the damage funko film and glue it on your box. You can also heat up the film on the side same process that you did on the sticker. 😀😀😀
What about the 2015 SDCC shared stickers that are paper ? They won’t come off the window 🪟
question..... My brother attended D23 Expo 2019 and he gifted me one of my all time grails, Mr Toad (SDCC 2017 1500 piece limited edition) from a vendor Fugitive Toys. However its legit and in mint condition but its missing the sticker but it doesn't seem like it was removed. I have reach out to the vendor but no answer yet. What should I do?
Try to buy one on ebay. Let me know which ones you need i sell them
Yeah buy another cheap con sticker funko and replace that to that. I normally do that.
The Relaxing Funko where can I buy one?
@@tothepanels Shoot man because it says LE 1500 it might be harder to find a legit one. I mean some has like a replacement sticker (not real) but close to it. But I rather have the real thing.
The Relaxing Funko same here, try to keep everything authentic as possible
Great video Dom. I like the variety on this channel. Are you going to do any comic book content?
Nothing is out of question here.
one thing i saw others use is glue tape, instead of super glue. less messy and much easier
Now my second question doesn't that deface the value of the pop considering you altered it?
No because no one knows.
Rachel Erdmann no not really as long as they can’t tell if you did it really good like he did ur chillin
Ur the man!
Would it not be easier to put the glue on the window while it is placed in the box?
Do we think double sided tape would work
hey bro can i pay you to replace the plastic on one of my pops?
Do you think this will decrease the price of the pop, and if so by how much?
No one will know lol
Which window did you use to replace for your vegeta?
I have to replace a window for one of my vegetas too
Another vegeta
What is the material of the window called? And where can I buy a clean sheet?
If you have a plastics store by you, they should have it. Like one of those that sells acrylic colored tubes and what not.
How do you just repair a sticker thats peeling off
I think the glue with some paper will be removed by an acetone.
In every way he is responsible if you screw up your pop box.
Does gorilla glue work?
I wish I had seen this video about a month ago before I tried (and failed miserably) to repair the window on one of my Star Wars: Rogue One pop's.
help, my cat is now superglued to my funko pop
Why not using a stock piece of plastic for the new windows? 🤷♂️
Would look different. Not original
I suppose when I buy pops I should check the window to see if someone has done this. Because then it’s not original...
Just use 3M double side tape, way safer and cleaner job
Too thick. Leaves a very noticeable gap.
I’m happy my first pop was 3 pound and it is worth 1100
How can I fix my window?
You collect Funko Pops and i collect Amiibos 🤣
why not put glue on the inside of the box and then put the window?
That's what I do I find it easier. But everyone has it own different ways of doing it.
I see it's too much work. I replaced my broken window by just cutting a cheap pop protector and putting the whole thing inside.
You can press box .
my pop came with almost no glue on the window lol
i’m good with a damaged window
Best way to open box with no damage is using a credit card (or anything like it) just speaking from experience, not to bash you
First
No way I he’ll I would use super glue, u need to use hot glue bruh easily applicable and I u screw up you can peel it off when it dries
I NEED HELP! I've just noticed that quite a few of the windows in my Funko Pop boxes no longer have a straight edge. Theyre actually rounded out and have lost the straight edge. Almost like the corners of the windows have bubbled out. What causes this and can it be fixed without doing a window swap?
I accidentally stabbed my funko box when opening it :(
same
I about to do this on a $500 signed pop and I’m scared asf
How did it turn out?? I’m gonna do the same thing 😮