What a professional job 👌 I watch Charlie Collison alot, and watching your video reminds me of him at work, you are meticulous, and “clean” with your work, top man!! Please post more video’s
Thanks alot John! Appreciate it! I put a new video up yesterday with a load of ticks I use daily while bricklaying! Make sure to subscribe fella! Hope you have a good weekend buddy!
Great work there mate! As soon as the gobbo is dry, it'll look like nothing ever happened!😀 keep up the great work buddy, looking forward to the next one as always! 👌😁👍👷♂️🧱
Great job mate as always your gonna get ppl putting ur work down. Just ignore them. I’m sure if the shoe was other the other foot they wouldn’t make sill digs at ur work.
Appreciate your support as always mate! Ah mate..water off a ducks back! However do appreciate criticism if its actually helpful! Hope your well buddy 😁👍
Canadian viewer here. Pretty creative on your top row. Good job. Gotta ask about the poor insulation blanket squeezed in between. Is this this only layer of insulation the house gets?
Hey mate! Yea that top course was alright in the end👌 Pretty much so..the existing house cavity was only 50mm so there isnt much insulation, however the Extension we built has a 100mm cavity with 100mm of insulation..so should be warm in there👍😁 Cheers for the comment buddy! Hope your well!🍻
I always keep one set of lines with a nail attached one end rather than thick pin so you haven’t gotta smack 30 nails in the wall but still nice idea, also I grit my teeth when builders lever a bar or brick hammer off existing brick when toothing out 😬😬 nice idea with the wire brush though I’ll take that onboard
Cheers for the comment buddy, I actually snapped a few stretchers while levering the halfs out. So can see why you grit your teeth 😂 yea lovely finish on that wire brush technique rather than the chariot! Hope your well buddy and had a good weekend mate!
Ive just subscribed mate... When you hit 1000 subs, probably today maybe, be careful when you've got that radio on and explaining something on the video, like when you threw the muck between the two bricks... Take it from experience, not worth the copyright claim 😂
Eeey thanks alot mate! Been watching your videos for ages now! Will do mate! Are they proper strict on it? Cheers mate, I love little tricks like that Thanks for the support and sub mate! Appreciate it! Haha only 12 more subscribers now😁😁👍 Enjoy the rest of your weekend lads!🍻😊
Ayup mate! Yes lad always paying tribute to the other lads on RUclips! Love the community on here, as everyone shares their tricks and tips! Haha Budd, Steve and alex and bricklaying worldwide are all fantastic lads!
Love the vids mate. Very tidy work. Is it me or are you laying them upside down ? The brick has a sharp edge and a rolled edge I thought rolled is at the bottom ?
Ayup mate really appreciate it! I'm hoping to be working on a few videos next week 😃 yes they were upsidedown 😨😨The house I toothed into was like that, so followed suit 👍 You know how it is following existing buildings 😨😨
Thanks buddy! Thanks to telling me to get a tuck pointer...tell you what, dont know how I've gone all these years without it😂😂 used it every day since buying it! Apologies for getting your channel name wrong! Enjoy your day buddy, hope the rain hold off for you lads!
@@IzzytheBricky . No probs . I got told by our viewers to get one so only had mine about 3 years ago . It’s one of those tools that once you have it you wonder how you managed without it 😆 . Me and Al are doing a 200 mile round trip to appear on the On the tools show tonight , make sure you watch tonight . 6 till 7 😉🧱👍🏽
Took the soldiers off today and just put x3 course over👌 yea but would have been hard to get I'd of that boe in that lintle 😮 Cheers David, hope your well fella
What a professional job 👌
I watch Charlie Collison alot, and watching your video reminds me of him at work, you are meticulous, and “clean” with your work, top man!!
Please post more video’s
Thanks alot John! Appreciate it! I put a new video up yesterday with a load of ticks I use daily while bricklaying! Make sure to subscribe fella! Hope you have a good weekend buddy!
CC will never have as good of a hand in the end.
Great work there mate! As soon as the gobbo is dry, it'll look like nothing ever happened!😀 keep up the great work buddy, looking forward to the next one as always! 👌😁👍👷♂️🧱
Haha hopefully! Appreciate it Rhys! Hope your doing well mate!😁👍🍻
⚠️scream specifical⚠️
It was me with the nail trick, I've Messaged you a vid on the pointing 👍
Haha thought it was! Spot on tip mate👍Cheers buddy appreciate it!
Great job mate as always your gonna get ppl putting ur work down. Just ignore them. I’m sure if the shoe was other the other foot they wouldn’t make sill digs at ur work.
Appreciate your support as always mate! Ah mate..water off a ducks back! However do appreciate criticism if its actually helpful! Hope your well buddy 😁👍
great match on the brick. And nice tip for the tight joint up top. Looking good.
Cheers Wayne appreciate it! Yea almost a perfect match!!😁👌
Good match that mate looks good. That green house glass crack when I look at it 😂👍😂
Yea man buzzin with the match! Haha ah mate I was fuming..what can you do but laugh though 😂😂
@@IzzytheBricky 😂😂👍
‘Any birds on the go, or what?!’ 😂😂😂
Hahahaha 😂😂😂
You would have made a great Viking wielding an axe with that back hand hammer technique lol. Keep up the hard work.
😂😂 Thanks Jonathan! Cheers mate, will do!
Canadian viewer here. Pretty creative on your top row. Good job. Gotta ask about the poor insulation blanket squeezed in between. Is this this only layer of insulation the house gets?
Hey mate! Yea that top course was alright in the end👌
Pretty much so..the existing house cavity was only 50mm so there isnt much insulation, however the Extension we built has a 100mm cavity with 100mm of insulation..so should be warm in there👍😁
Cheers for the comment buddy! Hope your well!🍻
Lovely tidy work 👌 👏 👍
Thank you very much fella 👍😁
Watching from Canada, great work
Thanks Daz, appreciate it! Hope your well buddy! Bet it's getting cold up there now?
@@IzzytheBricky I’m on the west coast so it’s more wet than cold, at least it’s doesn’t get like -40 like the interior does,
I always keep one set of lines with a nail attached one end rather than thick pin so you haven’t gotta smack 30 nails in the wall but still nice idea, also I grit my teeth when builders lever a bar or brick hammer off existing brick when toothing out 😬😬 nice idea with the wire brush though I’ll take that onboard
Cheers for the comment buddy, I actually snapped a few stretchers while levering the halfs out. So can see why you grit your teeth 😂 yea lovely finish on that wire brush technique rather than the chariot! Hope your well buddy and had a good weekend mate!
I liked the cheat on the top course - i've logged that one away. Nice job!
Haha good man! You've got to have plenty of cheats up your sleeve doing these sorts of jobs!😂😂👌🍻
Cracking job mate 🤙🏻🤙🏻🤙🏻
Thanks baby!😍👍👍
Another great job izzy 👍
Thanks Michael 😄👍 hope your well fella!
Great job mate👍
Thanks mate! Hope your well!
Ive just subscribed mate... When you hit 1000 subs, probably today maybe, be careful when you've got that radio on and explaining something on the video, like when you threw the muck between the two bricks... Take it from experience, not worth the copyright claim 😂
Eeey thanks alot mate! Been watching your videos for ages now! Will do mate! Are they proper strict on it? Cheers mate, I love little tricks like that
Thanks for the support and sub mate! Appreciate it! Haha only 12 more subscribers now😁😁👍
Enjoy the rest of your weekend lads!🍻😊
Nice to see you guys all paying tribute to each other like Steve and Alex.
Oh and Budd… OLD BOY STYLE!! 🤣👍🏼
Ayup mate! Yes lad always paying tribute to the other lads on RUclips! Love the community on here, as everyone shares their tricks and tips! Haha Budd, Steve and alex and bricklaying worldwide are all fantastic lads!
Steve and Alex shilling for Chinese tools Ox. Free tools made from a slave country commiting GENOCIDE.
Looks nice mate 👍👌
Cheers Rob! 👍👍🍻
Aren't them bricks meant to be set frog down ? Been putting the side with all them dots down but notice you're setting them with the dotty side up.
Ayup buddy, I laid them like the original house buddy, so just followed suit. Bloody pain with the faceplane though!
Have a good weekend fella
@@IzzytheBricky makes sense !
Love the vids mate. Very tidy work. Is it me or are you laying them upside down ? The brick has a sharp edge and a rolled edge I thought rolled is at the bottom ?
Ayup mate really appreciate it! I'm hoping to be working on a few videos next week 😃 yes they were upsidedown 😨😨The house I toothed into was like that, so followed suit 👍 You know how it is following existing buildings 😨😨
Nice tidy solid jobs. Thanks for the mention 😉🧱👍🏽
Thanks buddy! Thanks to telling me to get a tuck pointer...tell you what, dont know how I've gone all these years without it😂😂 used it every day since buying it!
Apologies for getting your channel name wrong! Enjoy your day buddy, hope the rain hold off for you lads!
@@IzzytheBricky . No probs . I got told by our viewers to get one so only had mine about 3 years ago .
It’s one of those tools that once you have it you wonder how you managed without it 😆 . Me and Al are doing a 200 mile round trip to appear on the On the tools show tonight , make sure you watch tonight . 6 till 7 😉🧱👍🏽
@@SteveAndAlexBuild awesome mate! Yea mate I'll be watching! What is it being streamed on mate?
@@IzzytheBricky You tube and Facebook I think 🤔 🧱👍🏽
@@SteveAndAlexBuild eeey watching you guys live now!
Nice job shame you didnt take the boe out of the top as will always look like an opening
Took the soldiers off today and just put x3 course over👌 yea but would have been hard to get I'd of that boe in that lintle 😮
Cheers David, hope your well fella
@@IzzytheBricky im good mate keep up the good work
Looks mega that mate 👍👍
Cheers Andy appreciate it! Was really pleased with how it come out! 😁
Should parge back of brick where it's going in the toothing also.
Very neat job, but if you dont mind me pointing out to you, an edge is called an arris, not harris.
😂😂😂😂HONESTLY..I thought it was Harris! Thank you for letting me know😰😰😂
Cheers for the support buddy! Hope your having a good weekend ao far mate!
Excelente y muy bonito trabajo felicitaciones 👌👌 saludos desde Chile 🇨🇱🧱🏠
Thanks Vianka😄🍻
*Arris
How come you nail the damp tray onto the block work?
Ey..sick tbow mate😂👍 other bricky didn't put it in, just a bit of safety to make sure no moisture gets trapped in the cavity mate
@@IzzytheBricky hahaha you legend! You still play? Ahh okay mate nice one
Sometimes mate! Dont have much time since I've shifted my focus. Add me though, Thieving H
@@IzzytheBricky 145m xp in thieving FUKKK. Add me also.. GTA vicecity
Open joints on block work at door is bad.
Just Wait 2 mins...I flushed them all up 😂
@@IzzytheBricky still a few not done 😭
@@PaddleDogC5 😂😂😂
Keep thumb off line bad habit, especially if you're working with others.
Is this the blonde bird with the big bangers house pal
No insulation bud ??
It's in there fella! 👍👍🍻 hope your well matey!
🤦