VW / Audi TSI 2.0 Turbo Engine Sensors & Components Locations
HTML-код
- Опубликовано: 6 фев 2023
- Locate sensors and components on your VW/ Audi TSI 2.0 turbo fast, including high pressure fuel pump, vacuum pump, camshaft sensor, crankshaft sensor, water pump, VVT solenoid, engine coolant temperature and etc.
❗️If you find this video helpful, I would appreciate a $uper Thanks that can be found below the video.
🎦 More videos related to this engine:
2.0 TSI Engine Serious Common Problems to Watch Out For on VW and Audi
• 2.0 TSI Engine Serious...
VW/ Audi TSI 2.0 turbo 2008-2013 Timing Chain Tensioner Failure
• VW/ Audi TSI 2.0 turbo...
How to Replace Upgraded Timing Chain Tensioner on 2.0 TSI VW/Audi 2008-2014 engines
• How to Replace Upgrade...
Cranks But No Start? - VW Passat, Tiguan, GTI TSI 2.0 turbo 2008-2013 - Check This First
• Cranks But No Start? -...
How To Diagnose & Fix a P2440 Code on VW / Audi 2.0 Turbo TSI 2008 & Up
• How To Diagnose & Fix ...
Timing Mark Alignment for Valve Train On TSI 2.0 Turbo VW And Audi 2008-2015
• Timing Mark Alignment ...
Rear Main Seal Leak? Check This Easy Thing First - 2.0 turbo VW Passat, Tiguan, GTI 2008- 2014
• Rear Main Seal Leak? C...
Serpentine Belt Removal and install on VW Volkswagen 2.0 turbo engines 2008-215 - Simple & Fast
• Serpentine Belt Remova...
Complete Cylinder Head Removal & Install On Popular VW, Audi 2.0 T TSI Engine Gen 1,2,3 2008 & Up
• Complete Cylinder Head...
How To Diagnose A P2015 Code On VW Passat, Tiguan, CC, Jetta TSI/ CCTA 2.0 Turbo 2009 & Up
• How To Diagnose A P201...
Crankshaft Position Sensor Replacement On VW Tiguan, Passat, Eos, CC - TSI/ CCTA engine 2.0 Turbo
• Crankshaft Position Se...
💰Save money on other vehicle maintenance and repairs :
Top 3 Reasons Why Your Car Won’t Start
• Top 3 Reasons Why Your...
Pittsburg Harbor Freight Engine Support Bar 1000lb. Capacity - Review& Install
• Pittsburg Harbor Freig...
How To Remove A VERY Stripped Lug Nut - When All Tools Failed - Guaranteed
• How To Remove A VERY S...
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
• Cheap Way To Check For...
Brake Burning Smell? - Frozen Brake Caliper Replacement on Any Car
• Brake Burning Smell? -...
Brakes Dragging? And Not a Frozen Caliper?
• Brakes Still Dragging...
Save money and learn how to bleed brakes by yourself on any car
• Save Money And Learn H...
How to properly gap spark plugs
• Car Misfiring? Running...
Proper way to install valve stem seals
• Proper Way to Install ...
Hot Tip: Broken Stud Removal
• Hot Tip: Use a Torch f...
Remove a Broken Stud Below the Surface
• Remove a Broken Stud B...
Oil Bearing Clearance measuring - simple to understand video
• Oil Bearing Clearance ...
Symptoms Of A Seized / Locked Engine - How To Tell It’s Not A Bad Starter
• Symptoms Of A Seized /...
How to properly gap and install piston rings
• Piston Rings Replaceme...
How to check cylinder head or block deck for warpage
• Cylinder Head Warpage ...
Why is it important to replace the timing belt at the manufacture’s intervals
• Check and Change Your ...
Fast & Easy way to lap “grind” intake and exhaust valves
• Seating Intake & Exhau...
Replace Front Exhaust Flex Pipe on most 4 or 6 cylinder cars - Cheap Way
• Replace Front Exhaust ...
Better Throttle Response in Minutes
• Better Throttle Respon...
⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the
future.
#motorcarnut
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video. 
Авто/Мото
I was looking bloody everywhere for the engine coolant temp sensor on my Mk3 Octavia VRS, thanks for taking the time to make this vid, very helpful👍
Very welcome! Thank you for the feedback!
This was really informative. Great job. A little confusing, but great none the less. I would have never looked for a belt for the water pump in the back of the engine. Never. I'm saving this video since my grandson just got a car with one of these runs in it.
Thank you for the feedback, if you needed a little more info just let me know.
@@Motorcarnut do you know if anyone makes a video of the coil and plug replacement for these engines? The one he has looks like it has 2 sensors per cylinder. I don't recognize what I'm looking at. Mine is so much simpler.
@fredericocorrea9814 I don’t at the moment, sorry.
Thanku for helping us find where the coolant sensor is thankyou THANKU
Sure no problem.
Appreciate the video!
Thank you!
Thanks a lot sir @Mototcarnut. This video helped me.
Sure, no problem! Glad it helped!
I have a 2021 Cupra Leon estate with the 2.0 engine. 310 hp. Im struggling to locate the underside boost sensor that’s meant to be connected to the inlet pipe… could I have some help? Any advice?
I don't have that vehicle in my repair system because it's not sold in the US. Seems like an awesome car! Just follow the the inlet pipe from the boost side on the turbo all the way to the throttle body. Or if not there on the intake manifold there will be a couple of sensors, just search online for the correct part and compare it to the ones on the manifold.
Thanks 👍
No problem 👍
I have a 08 EOS 2.0t komfort, and Im having a difficult time locating the transmission speed sensor. Not the crank speed sensor or ABS speed senor. Google searches always show different cars and videos are too low quality or dont explain it well. Any help would be appreciated
I believe on your vehicle it’s in the valve body in the transmission
Question sir, for replacement of the coolant sensor next to the water pump, can it be reached and replaced without removing the intake manifold?
Yes, but difficult
Is it the same place for Volkswagen Passat 1.4 TSI 2010? I need to change crankshaft on mine.
It’s a different engine but should be in the same general areas.
I got a 2010 cc 2.0t , I got the crank sensor on the valve cover but that harness splits off with another plug that I can’t seem to find the connection for , any help?
There is not supposed to be any other wiring that splits off that plug
what's the black plastic cover to the left of the crankshaft sensor (1:04)? It has a number of torx screws holding it on. I have some oil leaking out of the bottom of that area. Thanks for pointing everything out.
Thats an access for the balance shaft, you can just reseal it.
Great. Thanks for the information. Very helpful@@Motorcarnut
@sanyopoweraid1 Thank you for your feedback appreciated!
Wow motorcarnut you really answer all questions.. it’s old post so response totally understand .. have 2006 Vw Passat 2.0t and car starts good runs good but seems after awhile it stalls and does and if I give it 20-1 hour starts back up .. maybe worse as wetjer gets hot .. researching seems maybe low or high pressure fuel sensor .. what’s your professional opinion?
Does the car have any codes coming up? Could be fuel related
What is that hose with metal on the end hanging next to the oil pressure sensors
Coolant hose for turbo
HI, thanks for the info but you missed 2, bottom of oil pan and there's 1 next to crank pully above the sump do you know what that's called
Thanks!, Bottom of oil pan doesn't have any sensor unless the Audi does which would be oil level sensor. In the other location I didn't see one but that area would be a crankshaft position sensor.
@@Motorcarnut oh sorry I should have said I got the GTI motor, I thought they all be the same for ea888
No they aren’t, but not sure as I don’t have one in front of me right now.
Does this apply to a 2015 audi s3 2.0t tfsi?
It's a little different but should be close
I’m trying to found out where my crankshaft sensor would be on my 2017 TSI SE Jetta 1.4
Should be in the same location, near the back of the engine towards the front of the car
Are there two coolants sensors? 14 jetta gli 2.0t in question
Yes, one is on the lower large coolant hose right near radiator and the other one is underneath the intake manifold, hard to get at.
I have a 09 Passat 2.0t with a p0299 code and was told I need a new turbo. Do you have a video on the removal for the turbo
I’m making one as we speak, hang tight
I’ll be waiting have the new oem turbo coming in this week but I’m also looking to replace my catalytic converter and I’m wondering if the cats from a 2008 Passat 2.0t are compatible with my 2009 Passat Komfort 2.0t? I see the cats for a 2008 Passat being sold for cheaper but a lot of the websites say it’s not compatible with my 09 Passat
Good video.
Where are the sensor turbo map?
Thank you!
It has a mass airflow sensor and it’s on the air intake near filer box
So close to what I was looking for. I can see the plug for the waste gate position sensor plug. I had to replace the wiring harness after a raccoon ate it. What does the other end connect to (I know where it connects to the waste gate actuator, where does the other end go)
I’m not sure what you mean? Just repair what was damaged.
The raccoon ate all but about 1” from the position sensor on the wastegate actuator itself. I don’t know where the corresponding end even connects to for me to pull and repairs it. The engine is still in the engine bay so it’s a tiny space. I can’t really get a good look around
I’ve searched for days. Can’t find any of the wiring diagrams 🤷🏻♂️
2014 cc tsi 2.0 can I swap the engine for 2014 Passat tsi 1.8
I’m not sure, I don’t change engines that were not originally installed
Where is the thermostat switch... NOT sensor? I'm surprised how little people talk about this since this is what would cause a stuck open or closed coolant path situation. Thanks for the video and any help. My intake manifold is currently off the vehicle Will this make reaching said switch easier?
What year and model or talking about? most are controlled by the computers information from the coolant temp sensor?
@@Motorcarnut 2013 Volkswagen Eos
@duckamuck1756 there is no switch in that car just the cts in the water pump hosing
I can't find anything about the 8 sensors above the turbo in the heads. They look like injectors but are not. What the heck are those things?
What year make and engine?
Hi! Where is the Oil temp. sensor? On the Oil pan?
Near oil filter
I have a 2010 Jetta 2.0 tsi, I’m having trouble finding the location of the boost sensor
On the back of turbo near passenger side rail
How many camshaft position sensors does a 2017 Audi A6 2.0T have
One
@Motorcarnut thanks I changed it with a audi sensor, but I'm still getting a code for the camshaft sensor
You have to check the valve timing and the oil control valve. These cars control valve timing with oil .
Hello. Can you please tell me where the oil temp sensor is on the vw passat b7 1.8 TSI?
Should be near the oil filter housing
@@Motorcarnut Thx...gonna give it a look
@@Motorcarnut Checked...it isn't there...🤔
@puffy8992 what year is your vehicle?
@@Motorcarnut 2011
Where is the knock sensor? What do I need to remove to replace it?
It’s under the water pump extremely hard to get to without removing the water pump if I remember correctly and a 10mm triple square socket
whats the easiest way to replace the coolant sensor?
Underneath the car, it's on the lower radiator hose mid way up.
and thats the one next to the water pump or under the intake because theres two sensors i already changed out (G83) and now just need to change (G62)
Which one did you replace? The one on the water pump housing or the pipe?
@@Motorcarnuti replaced the one on the the pipe i just need to replace the one on the water pump. I have access to it now, i removed some things to access it but i ran into an issue. Are both sensors the same ? the one next to the water pump the same than the one on the hose? if i purchase the same one i used for the hose can i use it for the one next to the water pump?
I believe they are different, should have a part number on the sensor itself.
Coolant Sensor ?
One is on the water pump housing and the second one is on the lower radiator hose.
Where is the turbo sensor located
What turbo sensor?
Map sensor?
Located on the turbo intercooler pipe that goes in the throttle body
Where are the knock sensor?
Should be a green plug
@@Motorcarnut green plug? The engine compartment is really dirty in my 2003 VW beetle 1.8l and I cannot find the knock sensors to save my life, specifically the bank 1 (sensor 1). Other youtube videos mix up the terms crankshaft and knock sensors which doesn't help because my crankshaft sensor is now unplugged...
There is a video out there on 2008 vw beetle knock sensors but I cannot distinguish if 2003 knock sensors are located in the same place. Help!
isn’t there two camshaft sensors ?
Not on the 2.0 TSI engine
Where is the MAP sensor?
On the plastic intake manifold
Where is the boost pressure sensor
On the plastic intake pipe near fans in front
Where the map sensor?
That engine uses a Mass Airflow Sensor ( MAF ) not a MAP. It’s located on the air intake tube between the throttle body and air filter housing.
@@Motorcarnut I’ve got a seat Leon cupra 280 and I can’t find the location of a map sensor.