How To Change Toner In a Laser Printer (Brother MFC L2700DW)

Поделиться
HTML-код
  • Опубликовано: 17 окт 2024

Комментарии • 123

  • @muzicmelodeez
    @muzicmelodeez 5 лет назад +3

    Easy to follow video. Spot on. Didn't know anything about a higher capacity toner until you mentioned it. Thanks

  • @riteasrain
    @riteasrain 5 лет назад +3

    Thank you! The one and only video I could find showing me where the cartridge goes, and it's not even my printer's serial number👌👍

    • @DANDLINC
      @DANDLINC  5 лет назад +1

      You're welcome! I'm glad it helped...the printer does a pretty good job hiding the toner. Don't forget to subscribe! (that helps me). DANDLINC.

  • @MCFCTheMadHatter
    @MCFCTheMadHatter 3 года назад +7

    Thank you for the video! It was quick, to the point and gave me just what I needed to get it done correctly!

  • @robinburk8316
    @robinburk8316 5 лет назад +6

    Spot on tutorial! Replacement went exactly like your video. Thank you for your time in making this video, it's much appreciated.

  • @hellagrant
    @hellagrant 4 года назад +7

    Thanks. I am sure I could have figured it out myself or look up the official manual. But this saved me time and it was well done.

  • @silviahurley9379
    @silviahurley9379 5 лет назад +5

    Thank you for your spot on instruction. Lucky you only paying $US 50 in your country. I am living in New Zealand and purchased it for $US 100. Cheers Silvia

  • @jimlowell9630
    @jimlowell9630 6 лет назад +2

    Impressed with the clarity of how to do it!

  • @alaaaly2439
    @alaaaly2439 6 дней назад

    FINALLY!!!! Thank you for this video. Really saved me.

  • @jfs70ss
    @jfs70ss 3 года назад

    What would we do without RUclips.....?!! Read directions....!! NOOOO.....!!! Thanks, made it a piece of cake...

  • @sherrydrake4973
    @sherrydrake4973 4 года назад

    Your video is a life saver. I use my printer for my income and needed to change the toner and get out the door with the printed documents but couldn't remember how to do it. Your video was excellent. Thank you!

  • @EdgarJackson-sr4sv
    @EdgarJackson-sr4sv Год назад +28

    The printer was a bit complicated to hook up ruclips.net/user/postUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 but it does the job very efficiently. I like the ink wells versus the ink cartages that cost an arm and a leg. It prints quickly and the quality is excellent. It shuts off when not in use, so you have to remember to turn it on. Overall, it exceeds my expectations. I'll update my review in a couple of months.

  • @helpinghomelesscats5819
    @helpinghomelesscats5819 3 года назад

    Thank you. I knew I had done it before, but since it didn't open easily I wasn't sure. This was very helpful.

  • @akayomamania9650
    @akayomamania9650 3 года назад

    Thank You! for taking your time to make this video - it sure saved me lots of my time and frustration!

  • @scarboroughstaxaffair43
    @scarboroughstaxaffair43 Год назад +2

    Well done my dear helper.

    • @DANDLINC
      @DANDLINC  Год назад

      @scarboroughstaxaffair43 Thank you very much. Don't forget to subscribe to help my little channel grow. Cheers!

  • @lorianaevans9378
    @lorianaevans9378 3 года назад

    thank you sir, I spend over an hour trying to figure out where to open to enter ink.. about 4:19 of your video.. whew! And it's Saturday so getting any human besides you was impossible! thanks so much #firstprinter/scanner/fax/scanner., etc wish me luck! truely thank you!!

  • @kathrynrobinson2444
    @kathrynrobinson2444 4 года назад

    OMG! I just spent an hour trying to figure out how to change my toner cartridge in my Brother MCF 3770...Duh! Thank you.

  • @isolatedfavorites5094
    @isolatedfavorites5094 5 лет назад +2

    Fantastic tutorial. In less than 5 minutes I was printing like Gutenberg. Thank you so much for your helpful tutorial!!!

  • @ubergeraldine
    @ubergeraldine 4 года назад

    Thankyou for a very clear and well demonstrated video! On the official Brother one the cartridge is just pulled out - but actually it wont - your trick of holding the printer with one hand an pulling the cartridge is the difference as it allows for just the right resistance at the right angle! Well done!

  • @donnadansie1283
    @donnadansie1283 2 года назад

    Thank you! Didn't remember one step and this certainly helped!

  • @tonicopm
    @tonicopm 6 лет назад +4

    Clear, short and to the point. Thanks a lot!

  • @waimaaka9181
    @waimaaka9181 8 месяцев назад

    Brilliant instructions. Clear and concise. Thankyou

  • @alhamachidiac2712
    @alhamachidiac2712 2 года назад

    Thank you so much for this clear and very precise video step by step that was done with so much ease.

  • @aberwocky
    @aberwocky 4 года назад +2

    Thanks for the straight forward instructions! Managed to get my toner changed in minutes. Couldn't figure out how to open it before.

  • @holliehazzard
    @holliehazzard 3 года назад

    Thanks! Clear, concise directions.

  • @faithlaster9837
    @faithlaster9837 3 года назад

    Thank you so much! I have tried to figure this out so many times!! This was so easy!

  • @MrRelax3737
    @MrRelax3737 2 года назад +1

    Very clear and easy to follow......THANKS!!

  • @PrettyFazes88
    @PrettyFazes88 5 лет назад

    I was at work feeling like a true idiot cus I didn't know how to change the toner!! LOl thank you so much your video helped me a lot!! I didn't have to ask for additional help it was super easy!!

  • @5150Crazy
    @5150Crazy 3 года назад

    Thanks . Can’t believe my new Brother’s manual does not say one word about changing the toner

  • @connierice7738
    @connierice7738 4 года назад +2

    Thank you so much. An invaluable video. I wouldn't have done it without this!

    • @DANDLINC
      @DANDLINC  4 года назад +1

      I'm glad it helped. Thanks for watching and don't forget to subscribe, that helps my little channel grow! DANDLINC.

  • @svazzana8594
    @svazzana8594 4 года назад

    There is a little green tab on the back of the cartridge., It slides along a metal rod. Is this supposed to stay on the rod or be pulled/pushed off of the rod?

  • @pamelatanner8775
    @pamelatanner8775 4 года назад

    followed your instruction, which was great, it wont come out seems to be caught on the left side, any advice?

  • @Mira-en9sv
    @Mira-en9sv Год назад

    simple and concise.........thank you

  • @cindygabriel5370
    @cindygabriel5370 4 года назад

    Thank you! Extremely helpful video that was just what I needed to replace the toner!

  • @ferbluesy
    @ferbluesy 4 года назад +1

    Thank you for your useful video. Happy 2020

  • @brendadenlinger7221
    @brendadenlinger7221 2 года назад +1

    Thank you so much. Great

  • @ponymare2
    @ponymare2 3 года назад

    Thanks for the explanation!

  • @mariodavila7463
    @mariodavila7463 4 года назад

    What a time saver. Thanks for taking the time to do it.

  • @kathymallett3603
    @kathymallett3603 4 года назад +2

    Thanks for this information. I noticed on the silver bag that the "drum unit Corona wire cleaning is required every time you replace the toner cartage" There is a diagram on the package. I did this with ease.

  • @koushikvenugopal5712
    @koushikvenugopal5712 4 года назад

    Very useful and to the point. Thank you very much!

  • @kseipp5948
    @kseipp5948 5 лет назад +2

    short & Sweet & to the point

    • @DANDLINC
      @DANDLINC  5 лет назад

      Thanks for watching! Hope it helped.

  • @lilaccana1
    @lilaccana1 3 года назад

    Very helpful video, thanks!

  • @gokhanbaris3198
    @gokhanbaris3198 Год назад +1

    YOU SAVED MY ASS AT OFFICE THANK YOU

    • @DANDLINC
      @DANDLINC  Год назад

      @gokhanbaris3198 Glad it helped! Can you do me a favor and subscribe to my little channel? Every bit helps!

  • @jettdial4639
    @jettdial4639 7 месяцев назад

    I just changed mine and works but some dark spot on the paper after printing, how to remove that dark spot

  • @stephenvannattan
    @stephenvannattan 3 года назад

    Very helpful. Thanks for doing this for us peasants.

  • @Dilparsad-Syangtan
    @Dilparsad-Syangtan 3 года назад

    Very helpful video, thank you.

  • @rahilamohammad4111
    @rahilamohammad4111 2 года назад

    Very helpful! Thanks!

  • @spookypenguin9239
    @spookypenguin9239 3 года назад

    Thanks, this was super helpful!

  • @donnasimmons4583
    @donnasimmons4583 Год назад

    I'm new and confused. There are four colors. So how to install each color into the printer/

  • @err6880
    @err6880 4 года назад

    Great video, very clear and so helpful !!! Thank you

  • @birb_overdose650
    @birb_overdose650 3 года назад

    Thank you, I managed to refill my Printer

  • @scottjackson1420
    @scottjackson1420 3 года назад

    Lol, I couldn't figure out how to open the front of my unit!!!
    But I'm good now!

  • @gunit3333
    @gunit3333 3 года назад

    Great video!!!

  • @tamenge11
    @tamenge11 Год назад +1

    Thank you very much!

  • @Magic420Girl
    @Magic420Girl 5 лет назад

    Can't find change out toner instructions for MFC-L2750DW. Lots on resetting it. What do we do with that little green square on top & @ the back of the Cartridge holder. It has an arrow imprinted on it pointing back at me, and yet a small lable just behind and on top of the square piece that seems to tell the user to make a "U-Turn" with it by sliding it all the way to the right. Anyone know what to do with this gadget?

  • @christophercordeiro5030
    @christophercordeiro5030 4 года назад

    Thank you. U saved me alot of time. ,😎

  • @kingmarkgod3143
    @kingmarkgod3143 3 года назад

    Very helpful!Thank you 😊

  • @atabeka3243
    @atabeka3243 4 года назад

    You the man , excellent information!

  • @adonyawilliams398
    @adonyawilliams398 2 года назад

    Great video

  • @Rambat
    @Rambat 3 года назад +1

    Mine still says replace toner 😭

  • @markuzz1982
    @markuzz1982 4 года назад

    Thanks for the information!

  • @robcory3744
    @robcory3744 2 года назад

    Thanks again!

  • @hilloryrobinson5251
    @hilloryrobinson5251 4 года назад

    this was a great video thank you so much for your help !!!

  • @homrajoli6238
    @homrajoli6238 3 года назад

    its not working in my printer, is there any other trick?

  • @amankumarprajapati5221
    @amankumarprajapati5221 3 года назад

    worthy video
    thankyou

  • @garcalej
    @garcalej 2 года назад

    Thanks a bunch!

  • @DwightGaut
    @DwightGaut 3 года назад

    I've never seen anyone use the paperstop for pulling open the door. If you look on the right and left sides of the printer, you will see indents that are intended for your fingers to press and pull the door down. It's a two handed operation although if you use the middle paperstop I guess you don't need two hands.

  • @timothym2241
    @timothym2241 5 лет назад

    Thanks for the valuable information!

  • @TheAfricaice
    @TheAfricaice 3 года назад +2

    Thank you.

  • @jasonlevy4252
    @jasonlevy4252 3 года назад

    First day at my new job. Helpful as hell. Thank You. #TooEasyProductions

  • @Thaboysincere
    @Thaboysincere 4 года назад

    Thanks super helpful

  • @ThaMaskRapper
    @ThaMaskRapper 3 года назад

    I follow ur steps did this at work lol

  • @BroMark1611
    @BroMark1611 4 года назад +1

    @00:03:00 timestamp is probably what you are looking for. At least that is where it takes off and the few seconds I needed to roll.

  • @wolfeinsteinzify
    @wolfeinsteinzify 5 лет назад +1

    Thanks it really help me out 😀

    • @DANDLINC
      @DANDLINC  5 лет назад

      Glad I could help out. Thanks for watching (and subscribe if you'd like, that helps me out!). DANDLINC.

  • @nelabotha3618
    @nelabotha3618 4 года назад

    Thank you that was easy

  • @andreaturpin1298
    @andreaturpin1298 3 года назад

    Thank you!!!

  • @allanbaerg9865
    @allanbaerg9865 4 года назад

    Thankyou for the video to help me

  • @margaritacardoza4744
    @margaritacardoza4744 3 года назад

    thank you so much :)

  • @twaynemoore503
    @twaynemoore503 3 года назад

    What if it says you only need black?

  • @jeffreynobles948
    @jeffreynobles948 5 лет назад +1

    Great video. You would not believe how many "gorillas" I have at my job that think they have to use every bit of strength/force they have to do a simple procedure like this on our printers. Countless numbers of machines have been damaged because of this. This isn't rocket science people!!!

  • @beverlybarlowmorris3021
    @beverlybarlowmorris3021 5 лет назад

    great, easy instructions

  • @laurenlaurenzo19640
    @laurenlaurenzo19640 4 года назад

    Thank you!! Just did it! 😊

  • @neiludage7954
    @neiludage7954 5 лет назад

    Thank you very much!! you saved me!!

  • @jackdelligatti4888
    @jackdelligatti4888 3 года назад

    Thanks BROTHER

  • @MrEfraim14
    @MrEfraim14 6 лет назад +2

    Thanks!

  • @brittanyjewell1024
    @brittanyjewell1024 4 года назад

    Thanks for that!

  • @robinghosh2109
    @robinghosh2109 6 лет назад +1

    thank for the help

  • @adem44573
    @adem44573 3 года назад

    Thank youuu

  • @furqansaeed
    @furqansaeed 4 года назад +1

    Perfect!

  • @BDL090754
    @BDL090754 4 года назад

    Thank you

  • @salamkhorga4884
    @salamkhorga4884 2 года назад

    great thanks

  • @johnx5891
    @johnx5891 Год назад

    Oh my.. please don't pull the "little tabs" in the center nor the paper guide in front (it can pull off or break) to open the front. There are finger pulls on left and right of the cover to open it! You can clearly see the right indent when you point to the toner label.

  • @TheAldarich
    @TheAldarich 4 года назад

    Thank you!

  • @olimpiadeprosperis7699
    @olimpiadeprosperis7699 3 года назад

    Thank’s 👍🏻

  • @catlog1235
    @catlog1235 5 лет назад

    I did this steps but the message still coming up

  • @olimpiadeprosperis7699
    @olimpiadeprosperis7699 3 года назад

    Grazie 😊

  • @jamescollins6927
    @jamescollins6927 5 лет назад

    No one does useful clips anymore I bought generic cartridges it comes with a plastic cover over the jet/ nipple it's stuck fast I mean won't come off so that leads me to believe you just push it in and the printer will pierce the plastic cover but I am not game to try unless it's wrong

  • @jayshad06
    @jayshad06 2 года назад

    you forgot to slide the green tab

  • @kriyaji1923
    @kriyaji1923 3 года назад

    TKS

  • @shankerchauhan3031
    @shankerchauhan3031 4 года назад

    Thank u

  • @kkrall1056
    @kkrall1056 5 лет назад

    thanks