That’s about as straight forward as one can make the process. Love it. Switching from civilian to military models and needed an idea on how to do camo.
I am going to try this on the type 97 I am building. I don’t have an airbrush and I tried free painting with mediocre results. I will update with how it went when I am done.
Cześć from Winnipeg, Canada! I subscribed and am going through your how to paint videos. I find your no nonsense approach easy to watch and to learn from. I hope you continue on to make videos to learn from.
Nice explanation of the process buddy, im trying it, its all about layers, paint then tape, i used to draw on the surface with a pencil and just paint in the lines
Metoda nieskomplikowana efekt mistrzowski! Kolejny niezwykle pomocny i inspirujący odcinek. W planach mam R-35 i zastanawiałem się jak "zaatakować" francuskie wesołe łatki, miał być tradycyjnie patafix bo "sprytna" plastelina jest dla mnie trochę za szybka a teraz już wiem, będzie taśma! Dziękuję.
@@coldemonspl Dawno temu "wypędzlowałem" Char B1 i wyszedł, chyba nie najgorzej bo sprzedał się szybko i zyskiem:) Teraz pora na nowe techniki:) Ta mi się podoba i nie lubię malować pędzlem :) tylko detal.
This is about the fastest, cleanest and best camo video I've seen. Now I'm off to watch all your others. Chodzi o najszybszy, najczystszy i najlepszy film z kamuflażem, jaki widziałem. Teraz idę oglądać wszystkie twoje inne. (Mam nadzieję, że Google wykonał dobrą robotę przy tłumaczeniu).
It looks cool, but from a historical perspective, the green (Olivgruen RAL 6003) was used sparingly towards the end of the war as it was the most costly to manufacture regarding chemicals. The brown & dark yellow are spot on, as by 1944 the " dark yellow" became more of a sand / tan colour while still retaining the same RAL code of 7028 & Chocolate Bown ral 8017 which was used widely in the first years of the war was replaced by Red Brown RAL 8012 as it was basically red oxide primer mixed with some pigment to give it a brown tint. All so 2 two-tone camo was more common towards the end of the war as some units only got one of the colours for camo ( either the green or the brown) Overall a great demonstration & your technique is excellent, I look forward to trying it.
I really like this SWS vehicle. Well done. You asked what we would like. Anything from you is good Lucasz but I do love the German WW2 soft cammos. Love the chanel & content !!!
Such a simple method and looks so great. And if you add colour modulation into the paint job it will look awesome. Thanks for sharing. I search so long for simple technique to apply a three tone camouflage. Your paint job looks really good. Greets and Cheers. 👍
About the red button, I don't know if I'm the only one having this problem, but although I click it, RUclips doesn't allow me to subscribe. That doesn't only happen with your channel, but it also happens with many other channels. I have to come and check for the updates. I really love your channel, and I always check it.
Andre, please check on other computer or mobile. Maybe you have something in you options marked? But remember - always at 6pm on Mondays and Thursdays! :)
@@coldemonspl I checked on my desk-top, my tablet and my mobile phone. I believe that I got selected by some youtube algorithm as persona non grata. I check this everyday ... just in case ... ;)
@@coldemonspl oops my mistake! Thanks for the reply and the info, really appreciate it! Just getting into modeling in the last month and learning a ton from vids like yours!
Super odcinek. Próbowałem wyważyć otwarte drzwi inną kolejnością działania. Najpierw przygotowałem maski na cały model a dopiero potem rysowanie i wycinanie. A tymczasem... można prościej. Mam jednak dwa problemy. 1. Skala 1/72. Nie wszystkie patenty da się tak łatwo na nią przełożyć. 2. Gdy odrywam taśmę odchodzi nieco brzeg farby robiąc brzydkie purywane krawędzie. Za duzo/grubo farby? Za bardzo wyschnięta przed usunięciem taśmy? PS robię Kubusia 1/72
Ad.1 Da się, ale trzeba do tego dobre oczy i narzędzia w postaci super noża - non stop ostre ostrze wiec wymiana co krótki czas. No i zdecydowanie wiecej czasu na zrobienie takiego kamo. Ad.2. Za grubo farby. Ja zrywam taśmę praktycznie zaraz po pomalowaniu jak juz tylko farba przeschnie odrobinę. :) Powodzenia! :)
Preshading - no, I dont like it; modulation - yes but not on each kit; highlights - rarely. I dont keep the borders of realism - the most important is to make it as an eyecatcher.
Hey Lukas i have a question, i remember like 9 years ago you made a croatian T34 85, aka the Croatian Devil, do you maybe know what kit it was cause i cant seem to find a kit with the mounted m2 browning, thanks.
yeah, it was one of my first serious kits I built. I remember becasue it was a challenge to mix 2 kits in one :) T-34 was from dragon with Tamiya wheels from T-55. The M2 on the top was scrachbuilt and I use RB Model to enrich browning. Please check the Live Resin - they have some M2 mounts. Maybe you will find something there. :)
in my opinion, its ALOT LOT easier to simply just decrease your airbrush spray size and then do it like that. this methood that he is using above is mainly used for people without a airbrush
Fajna , prosto i oczywista metoda, ale dopóki nie zobaczysz u kogoś na kanale to sam nie zrobisz :D Na pewno będę korzystał , do tej pory jechałem z offhanda ale to nie zawsze wychodzi tak jak by człowiek chciał :D
Cieszę się, że udało mi się to jakoś łatwo pokazać. W sumie jeden z moich pierwszych filmów i nie miał być publikowany, ale widzę, ze to był dobry krok żeby jednak poleciał w eter. ::)
Not a big fan of hard edge camo ….always looks fake to me….i know it was used. Just don’t like it! Having said that, this is an excellent way to do it!
That’s about as straight forward as one can make the process. Love it. Switching from civilian to military models and needed an idea on how to do camo.
No problem. Just use my videos to find some ideas! :)
simple straight to the point i love it
Thank you very much buddy! :)
非常感谢！你的这个方法也比较简单，我之前从没有制作过硬边的迷彩，正好可以学着用。但我有一个构思，就是拿儿童玩具橡皮泥来当遮盖物，有一种儿童的化学胶泥在空气中放置一阵子会变得偏硬一些，这种质感粘在模型表面的时候手指的按压会自动呈现出饱满的圆形，当然以上是我的猜测，我没有实践。
There are different ways to paint this camo. Your option is also good! :)
Nicely done It does work well on the tri tonal camo also gives you plenty of great options
Correct :)
I am going to try this on the type 97 I am building. I don’t have an airbrush and I tried free painting with mediocre results. I will update with how it went when I am done.
It's very easy, just try it! Good luck! :)
@@coldemonsplUPDATE: I finished my painting and it turned out very well. Thanks for the tips.
@@karkanrey1463great mate!
Very nice technique, very creative and effective.
Many thx mate! :)
Well done brother - BEST technique I have seen to date. And for a new modeler like me, easy to understand and do!!! Thanks for this!!
Great mate! Good luck! :)
Great technique :) thanks for sharing with us. I have a hard-edged camo to do soon and I may go for this method.
Thx a lot mate! It is really easy to do. Good luck! :)
Well done. Thank you.
No problem! :)
This is a brilliant idea, thank you very much for your video, very helpful!
Thx mate! Nice to see you here! :)
Thanks for the lesson mate, much appreciated. Very well described and easy to follow
It's very easy, just try it! Good luck! :)
Great clear and simple video, congratulations
Thank you Stefano! :)
Great technique! I hadn't thought of doing it this way so thank you, I will give it a go.
Thx a lot for your comment mate!! :)
Thanks you a lot. That was very informatively and interesting for me. I will try it! :)
Good luck with it! :)
Cześć from Winnipeg, Canada! I subscribed and am going through your how to paint videos. I find your no nonsense approach easy to watch and to learn from. I hope you continue on to make videos to learn from.
thx a lot and im glad they are useful. :)
Great tutorial. Thank you. I subbed.
Thx a lot mate! :)
Loved it thank you.
Thx mate! :)
I love the end result
Świetny wynik
dzieki Szymon! :)
@@coldemonspl powinienem ja tobie dziękować naprawdę dużo mi to pomoże
Excellent paint job 👏 I love those late war German scheme's. Gives me lots of inspiration. Thanks
No problem mate! My pleasure!
Nice explanation of the process buddy, im trying it, its all about layers, paint then tape, i used to draw on the surface with a pencil and just paint in the lines
Thank you very much buddy! :)
Great looking paint!
Thx Andrew! :)
great video my friend excellent tutorial really handy thanks for sharing
Thx mate! :):):)
Perfect timing; just got done priming my Stug IV
yeah! Good luck with Stug! :)
Ty so much for this video. It helped a lot. Great work mate
No problem! Thank you very much! :)
Wow ! Simple and perfect ! This is what I'm looking for. Thanks. So my MAZ 537 1:10 waiting for nice painting.
Supoerb! Thx for your comment! :)
This was a huge help! Thanks
No problem! Thank you very much! :)
Beautiful
Thx :)
This is my preferred method rather than using putty masks. Great camo job.
Thank you very much! :)
Very nice technique.
Thank you very much! :)
Great video, I have a CorgiToys Saladin tank which I want to give a different colour scheme.
Good luck! :)
Metoda nieskomplikowana efekt mistrzowski! Kolejny niezwykle pomocny i inspirujący odcinek. W planach mam R-35 i zastanawiałem się jak "zaatakować" francuskie wesołe łatki, miał być tradycyjnie patafix bo "sprytna" plastelina jest dla mnie trochę za szybka a teraz już wiem, będzie taśma! Dziękuję.
Hej! dzieki za komentarz! French camo bym zrobił z pędzla w całości. :)
@@coldemonspl Dawno temu "wypędzlowałem" Char B1 i wyszedł, chyba nie najgorzej bo sprzedał się szybko i zyskiem:) Teraz pora na nowe techniki:) Ta mi się podoba i nie lubię malować pędzlem :) tylko detal.
@@robertkabat4509 no i spoko. :) Powodzenia! :)
I'm new to model diorama and this really helped, so does a good drink :)
No problem! Good luck! :)
Another great video. Thanks for sharing. Hull red for late war red/brown… thanks for the tip..
No problem :)
It's such a pleasure to watch your video!!! Awsum and now I have tooo many ideas.... many thanks....blah blah 😉🤗😎
OK. Thx! Just realise! :)
Great work!!!
Thx a lot!
Great tutorial!! Ill be using this technique for the Swedish STRV 103 :)
Thank you very much buddy! :)
Very nice thanks for sharing ❤
Thx a lot mate! :)
Great idea 💡
Thanks for sharing 👍
Thx Bob! :)
Top job my friend. 👍👍
Thank you John! :)
This is about the fastest, cleanest and best camo video I've seen. Now I'm off to watch all your others.
Chodzi o najszybszy, najczystszy i najlepszy film z kamuflażem, jaki widziałem. Teraz idę oglądać wszystkie twoje inne. (Mam nadzieję, że Google wykonał dobrą robotę przy tłumaczeniu).
Thank you very much! :) Google did good job with translation :)
Verry nice job ❤❤❤
Many thx mate! :)
Awesome job stary. Greetings from Oz.
Thank you very much buddy! :)
Well done!
Thx a lot mate! :)
looks great
Thank you very much buddy! :)
Good job 👏
Thx a lot mate! :)
@@coldemonspl 👍
nice one!
Thx a lot Rick! :)
Thanks for making the video its appreciated . Regards Gav.
Thx Gavin for your comment!
It looks cool, but from a historical perspective, the green (Olivgruen RAL 6003) was used sparingly towards the end of the war as it was the most costly to manufacture regarding chemicals. The brown & dark yellow are spot on, as by 1944 the " dark yellow" became more of a sand / tan colour while still retaining the same RAL code of 7028 & Chocolate Bown ral 8017 which was used widely in the first years of the war was replaced by Red Brown RAL 8012 as it was basically red oxide primer mixed with some pigment to give it a brown tint. All so 2 two-tone camo was more common towards the end of the war as some units only got one of the colours for camo ( either the green or the brown) Overall a great demonstration & your technique is excellent, I look forward to trying it.
Thx for your interesting comment! I really appreciate that! :)
Great idea and well made video! :)
Thx a lot! :)
I really like this SWS vehicle. Well done.
You asked what we would like.
Anything from you is good Lucasz but I do love the German WW2 soft cammos.
Love the chanel & content !!!
Thx Steve! I will have something for you after Tiger. And it will be with soft camo :)
Such a simple method and looks so great. And if you add colour modulation into the paint job it will look awesome. Thanks for sharing. I search so long for simple technique to apply a three tone camouflage. Your paint job looks really good. Greets and Cheers. 👍
Thank you Mathias! Well, it is really easy, especially when you know how to do it and dont need to discover any new ways! :)
@@coldemonspl Yeah and so simple that i not think about it. I thank you so much for this Tip.
I often wondered model builders painted camo on their models. Now, I have an idea.
Thx. Im happy my video helps :)
About the red button, I don't know if I'm the only one having this problem, but although I click it, RUclips doesn't allow me to subscribe. That doesn't only happen with your channel, but it also happens with many other channels. I have to come and check for the updates. I really love your channel, and I always check it.
Andre, please check on other computer or mobile. Maybe you have something in you options marked? But remember - always at 6pm on Mondays and Thursdays! :)
@@coldemonspl I checked on my desk-top, my tablet and my mobile phone. I believe that I got selected by some youtube algorithm as persona non grata. I check this everyday ... just in case ... ;)
It is good & very easy& impressive 👍👍🇵🇰🇵🇰
Many thx mate! :)
Thank you.
Thx a lot mate! :)
hello lucas wonderful simple precise job 👍, i think i will try in the near future to redo some military gear. Good continuation in your projects 👍👍👍
Good luck mate!!! :)
Nice ... thanks bro ...
No problem! Thank you very much! :)
Cool
thx :)
Looks great! Very nice video. Subbed. Also anyone know what book is being used? Would like to get a copy!
Thx mate! The book is shown and I also added the link to order it! :)
@@coldemonspl oops my mistake! Thanks for the reply and the info, really appreciate it! Just getting into modeling in the last month and learning a ton from vids like yours!
@@FlightLine4240 No problem at all. Good luck! Highly recommend my Patreon! :)
Świetny film bardzo mi pomoże w moich modelach uwielbiam niemieckie czołgi ale nigdy mi nie wychodzi z malowaniem
Trening czyni mistrza :)
Super odcinek. Próbowałem wyważyć otwarte drzwi inną kolejnością działania. Najpierw przygotowałem maski na cały model a dopiero potem rysowanie i wycinanie. A tymczasem... można prościej.
Mam jednak dwa problemy.
1. Skala 1/72. Nie wszystkie patenty da się tak łatwo na nią przełożyć.
2. Gdy odrywam taśmę odchodzi nieco brzeg farby robiąc brzydkie purywane krawędzie. Za duzo/grubo farby? Za bardzo wyschnięta przed usunięciem taśmy?
PS robię Kubusia 1/72
Ad.1 Da się, ale trzeba do tego dobre oczy i narzędzia w postaci super noża - non stop ostre ostrze wiec wymiana co krótki czas. No i zdecydowanie wiecej czasu na zrobienie takiego kamo.
Ad.2. Za grubo farby. Ja zrywam taśmę praktycznie zaraz po pomalowaniu jak juz tylko farba przeschnie odrobinę. :)
Powodzenia! :)
did you made some preshading, modulation or highlitht on your model ? i seemed not . For realism ? I love your style.
Preshading - no, I dont like it; modulation - yes but not on each kit; highlights - rarely. I dont keep the borders of realism - the most important is to make it as an eyecatcher.
@@coldemonspl THANKS for your reply
Hey Lukas i have a question, i remember like 9 years ago you made a croatian T34 85, aka the Croatian Devil, do you maybe know what kit it was cause i cant seem to find a kit with the mounted m2 browning, thanks.
yeah, it was one of my first serious kits I built. I remember becasue it was a challenge to mix 2 kits in one :) T-34 was from dragon with Tamiya wheels from T-55. The M2 on the top was scrachbuilt and I use RB Model to enrich browning. Please check the Live Resin - they have some M2 mounts. Maybe you will find something there. :)
@@coldemonspl thank you so much!
Most times the real vehicles paint would fade very quickly under the sun. So it makes sense to do a faded muted color scheme.
Indeed! thx! :)
How would you aproach to a spesific scheme?
I would have to have all the sides to accurately reproduce the camo spots. The rest is the same as in the movie
Are you mix with water before put inside airbrush pen?
Sometimes. :)
I hate masking. I either do it with a flat edge brush by hand or use blue tack.
Your choice :) Good luck!
👍👍👍
👍 👍 👍 👍 👍
dobra robota
Dziękuję Tomek!! :)
in my opinion, its ALOT LOT easier to simply just decrease your airbrush spray size and then do it like that. this methood that he is using above is mainly used for people without a airbrush
Thx for your opinion Aaron. :)
Where do you get the book?
Check the AK Interactive page please! :)
Fajna , prosto i oczywista metoda, ale dopóki nie zobaczysz u kogoś na kanale to sam nie zrobisz :D Na pewno będę korzystał , do tej pory jechałem z offhanda ale to nie zawsze wychodzi tak jak by człowiek chciał :D
Cieszę się, że udało mi się to jakoś łatwo pokazać. W sumie jeden z moich pierwszych filmów i nie miał być publikowany, ale widzę, ze to był dobry krok żeby jednak poleciał w eter. ::)
blah blah blah, got me to subscribe, love it just modeling
Many thanks! :)
Cześć
hej!
Not a big fan of hard edge camo ….always looks fake to me….i know it was used. Just don’t like it! Having said that, this is an excellent way to do it!
Thank you very much buddy! :)
why do you speak like you will break me
??
😂