As an "Old dog -80 years old" you have showed me I can learn new tricks! You have helped me start to learn how to use my new Cricut Explore Air 2! Although my head is so full of information right now, I know that I will continue to learn from you as you are so very good at explaining everything and showing how to use it, especially love the big Red hand that helps me follow where you are using a feature on Design space. I have an old Cricut Expression I used for years but nothing like this one. So Bless your heart for being such a good teacher! I am looking forward to watching and learning all I can from you
Thank you Jennifer. My husband gave me an Explore 3 for Christmas and I felt a bit anxious about getting started. You have so much experience. I’ve watched one and this one of your tutorials and will get on to part 3 tomorrow. Feeing much less anxious now after watching. ☺️
I really wish that Cricut would hurry up and make a lot of different colors for the large/ chunky markers that came out with the Venture. I also hope that Cricut will sooner rather than later release the card mats as well for the Cricut Venture and it would be great if they have multiple mats for multiple sized cards because I'm not into giving A2 sized cards, I like all size cards especially huge sizes. The possibilities are endless! I just love different things!😊💝
Thank you for all the information. I bought the bonded fabric point blade and now will be returning it. I'm also a quilter and look forward to cutting fabric. My daughter also bought me the deep point blades and fine point blades that are gray. looks like I'll be returning those also lol. I look forward to learning everything I can from you.
I was hoping to watch live but work got busy so I'm rewatching now. Thanks for all the information! I've learned so much from you and you do such a great job teaching everything!
You're SO right... it's all overwhelming as a beginner... I think I've got too much stuff and don't know what I'm doing... thinking I need to use it all!!! Lol
Missed being here dor the lives but had to watch the replay. Would really like to get an Explore, I didn't think any of them still took the cartridges and have a bunch.
Thank you Jennifer for this awesome video and for the great tips and informations! Love your video's as always learn so much from you and them!!!! Was using my peens last week and could hear your voice saying check your pens first before using them to make sure they work! Thank you for Sharing!!! Hugs x
Thank you for these lessons! They are really helping me I need to go get some card stock for lesson 3 then I will be moving on to it. Question, can you use thr transfer tape more than once or is it one and done?
Yes, your machine will guide you on what blade to use. When you are using a machine that has the ability to use different blades, it will inform you which blade to use for your specific task. However, the context does not mention if the machine will tell you which mat or pen to use. For mats and pens, you might need to refer to the guidelines provided for different materials and tasks.
Congratulations on your new Cricut! We have a free series of online classes that show you how to set up and begin creating with your machine as a new Cricut owner! Here's the link to sign up: makeracademy.com/cricutkickoff
my air 2 is bad cutting vinyl never cuts all the way. Tried everything from different brands new blade custom settings more pressure. Could I use a deep blade to try to cut it
I would suggest to only use Cricut brand blades. My Explore has had the same fine point blade for over 4 years now. We have a blog post that might help you troubleshoot here: jennifermaker.com/cricut-cutting-problems-tips-cleaner-cuts/
As an "Old dog -80 years old" you have showed me I can learn new tricks! You have helped me start to learn how to use my new Cricut Explore Air 2! Although my head is so full of information right now, I know that I will continue to learn from you as you are so very good at explaining everything and showing how to use it, especially love the big Red hand that helps me follow where you are using a feature on Design space. I have an old Cricut Expression I used for years but nothing like this one. So Bless your heart for being such a good teacher! I am looking forward to watching and learning all I can from you
You are so sweet! Thank you! Never stop learning new things! Much love ❤️
Thank you Jennifer. My husband gave me an Explore 3 for Christmas and I felt a bit anxious about getting started. You have so much experience. I’ve watched one and this one of your tutorials and will get on to part 3 tomorrow. Feeing much less anxious now after watching. ☺️
I am so excited to learn all you have to teach us. It’s always a pleasure to watch your videos and I learn so much.
Love workbook
I don't have a Explore or Venture, but it is cool to see all the things that go with when I get one. Thanks for taking the time so show us everything.
I really wish that Cricut would hurry up and make a lot of different colors for the large/ chunky markers that came out with the Venture.
I also hope that Cricut will sooner rather than later release the card mats as well for the Cricut Venture and it would be great if they have multiple mats for multiple sized cards because I'm not into giving A2 sized cards, I like all size cards especially huge sizes.
The possibilities are endless!
I just love different things!😊💝
Love the blade holders, especially the 3D printed one. I plan to try making one with your pattern! Thanks!
Great tutorial. Thank you so much. The handout is well organized too.
❤ Gambo Newfoundland, hello 👋 crafters
I loved all of the information I received! Thank you
I truly value these tutorials
Thank you 🌹🌹
Thank you for all the information. I bought the bonded fabric point blade and now will be returning it. I'm also a quilter and look forward to cutting fabric. My daughter also bought me the deep point blades and fine point blades that are gray. looks like I'll be returning those also lol. I look forward to learning everything I can from you.
I’ve never seen the light up weeding tool. Gotta get that!
watching again and taking notes in case I missed anything
So very interesting. All these supplies are amazing!
Rewatching since I missed a bit of beginning and I put in code already. But I am going to rewatch it all. Always something you miss😊
Thank you!!
Thank you for sharing your knowledge. It's a blessing to me
Great information Jennifer ❤
Thanks for watching!
I was hoping to watch live but work got busy so I'm rewatching now. Thanks for all the information! I've learned so much from you and you do such a great job teaching everything!
Thank you! I used to have a cricut and would love one! Thanks Greg!
Thanks looking forward to the Maker lessom
You're SO right... it's all overwhelming as a beginner... I think I've got too much stuff and don't know what I'm doing... thinking I need to use it all!!! Lol
You got this!
Loved learning about the blades and seeing that awesome case Greg made for you! Thx al always for the information you teach all of us. 💙
I hope Greg feels better soon! 😊
I love these videos Jennifer!! You are amazing.
Missed being here dor the lives but had to watch the replay. Would really like to get an Explore, I didn't think any of them still took the cartridges and have a bunch.
Great information
I guess I missed it and I’m watching the replay .
Please let me know how can you sublimate without a sublimate printer
Thanks
Thank you so much for giving us so much information
You are so helpful
Use Infusible Ink! jennifermaker.com/cricut-infusible-ink/
So excited
Thank you for this information. Can you explain the difference between the cricuit Maker and the cricuit Explore?
Here is a comparison. jennifermaker.com/which-cricut-should-i-buy/
Ready to watch maker 3. Im thinking maybe sell other machines and get it.
Thank you Jennifer for this awesome video and for the great tips and informations! Love your video's as always learn so much from you and them!!!! Was using my peens last week and could hear your voice saying check your pens first before using them to make sure they work! Thank you for Sharing!!! Hugs x
Very educational ❤️
Does the fine tip pens work on fabric.?
Jennifer, what version are you using?
Thank you for these lessons! They are really helping me I need to go get some card stock for lesson 3 then I will be moving on to it. Question, can you use thr transfer tape more than once or is it one and done?
I use my transfer tape over and over till it no longer works! 😃
when I tried to take out the housing for the pen a light came on. What do I do?
I have a question…how many cricut machine can you use on one computer or tablet???
Is all the cards to me you use in your supply list somewhere ?
Will my machine tell me what mat, pen, or blade to use
Yes, your machine will guide you on what blade to use. When you are using a machine that has the ability to use different blades, it will inform you which blade to use for your specific task. However, the context does not mention if the machine will tell you which mat or pen to use. For mats and pens, you might need to refer to the guidelines provided for different materials and tasks.
Cricut Explore air should work?
Thank you so much for all the information in your video! You are a great teacher!! 🎉
I just got the explore 3 i haven't touched it yet I'm afraid ill break it.
Congratulations on your new Cricut! We have a free series of online classes that show you how to set up and begin creating with your machine as a new Cricut owner! Here's the link to sign up: makeracademy.com/cricutkickoff
my air 2 is bad cutting vinyl never cuts all the way. Tried everything from different brands new blade custom settings more pressure. Could I use a deep blade to try to cut it
It is not supposed to cut through the carrier sheet. Only the vinyl.
My fine point blade is butchering my cardstock
I tried cleaning the blade.. multiple times.. my mars are not lasting long at all
I would suggest to only use Cricut brand blades. My Explore has had the same fine point blade for over 4 years now. We have a blog post that might help you troubleshoot here: jennifermaker.com/cricut-cutting-problems-tips-cleaner-cuts/
Is there another session for the Maker3?
Yes. Today at 6 pm. You can watch the replay and tomorrow as well.
i watched but forgot code
The giveaway has ended. Sorry