If your movable coffee pipes get block try unblocking with a small pipe cleaner to unblock..... it maybe good to decalcify.... even if not requested.... adjust the hardness to the highest level to force it then readjust to the normal level.
My Jura Impressa F50 did not let me proceed to rescaling unless filter was removed. I watched your video over and over and got the reading filter yes and finally I had to enter filter no to proceed. I don’t think that the filter should be in the solution of the 3 tablets especially that is harmful. Thanks
Can anybody help me out - I took filter out, I turn off the machine, keep maintainace button - but my coffe machine says ‘open tab, chg filter’. I have tried many times but cannot run descaling process.
Sorry I'm not sure. Just follow exactly what it says. If it say open tap? not open tab. So open the tap till it stops coming up on the machine. You have to do it a few times.
Hello again, I just found the issue, I could not run the descaling since my filter was on ‘YES’ possibility. It was not quite obvious for me since just got this machine. When you go to P settings then Filter then choose No option then you can do it. Turn off machine then press ringing button then empty tray message pops up and you are all set! Thank again and enjoy your coffee!
I don't know what went wrong, but in my case, the machine didn't give further instructions. It just kept saying "decalcify ready." What I did was turn it off, remove the frother, turn it on, and press rinse. It stopped there, and no matter how many times I pressed rinse, there were no further instructions for emptying the tray, let alone the decalcifying process. Has anyone experienced a similar issue?
Sorry wrote wrong process, it is for the big tablets which is the descaling and not the decalcifying process which the filter should be removed. thank you
If your movable coffee pipes get block try unblocking with a small pipe cleaner to unblock..... it maybe good to decalcify.... even if not requested.... adjust the hardness to the highest level to force it then readjust to the normal level.
Thanks for watching and the advice is great. 👍
My Jura Impressa F50 did not let me proceed to rescaling unless filter was removed. I watched your video over and over and got the reading filter yes and finally I had to enter filter no to proceed. I don’t think that the filter should be in the solution of the 3 tablets especially that is harmful. Thanks
You’re probably right. I have to look in to that but like I said I followed the instructions
Can anybody help me out - I took filter out, I turn off the machine, keep maintainace button - but my coffe machine says ‘open tab, chg filter’. I have tried many times but cannot run descaling process.
Sorry I'm not sure. Just follow exactly what it says. If it say open tap? not open tab. So open the tap till it stops coming up on the machine. You have to do it a few times.
Hello again, I just found the issue, I could not run the descaling since my filter was on ‘YES’ possibility. It was not quite obvious for me since just got this machine. When you go to P settings then Filter then choose No option then you can do it. Turn off machine then press ringing button then empty tray message pops up and you are all set! Thank again and enjoy your coffee!
I don't know what went wrong, but in my case, the machine didn't give further instructions. It just kept saying "decalcify ready." What I did was turn it off, remove the frother, turn it on, and press rinse. It stopped there, and no matter how many times I pressed rinse, there were no further instructions for emptying the tray, let alone the decalcifying process. Has anyone experienced a similar issue?
@@audriveesa I haven’t but just call Jura. I think they would be able to help. I think they also repair as well. But it’s not inexpensive of course.,
Good video my frind
MSA Vlog thanks for watching. 😊
An important step in decalcyfing is that the filter is to be removed, can you please confirm that and if so make correction on video. thank you
Sorry wrote wrong process, it is for the big tablets which is the descaling and not the decalcifying process which the filter should be removed. thank you
Hi there, I follow the steps in the instruction manual. The filter is not mentioned.
That looks like a really nice one!
It's an awesome machine. Makes the best coffee. I highly recommend it.
Great coffee machine girl! I gave you a thumbs up! ;)
I gotta have my coffee or i'm just a zombie! Thanks so much!
Likewise here! Have a nice day! :)
You as well!
Great video
Thanks so much for supporting!
That is so nice!
Thanks so much Heather for all your support.
I love my self a cup of good coffee delicious
I have the same for under 1k
WD .Underground exactly the same cause there’s so many models. I purchased this one about 6 years ago now. Thanks for watching! 😃
Heyhey Bella yes i have the impressa F50 EU edition, i thought you where scammed if you recently bought it hihihihi
High five! ☕☕☕☕
You're so cute! Thanks Girl!
Your video is still my reference material for decalcifiaction, rather than go to the official Jura site
One thing though. Please remove and clean the filter while your decalcifying.
Great video