usually Mean Well produces quality power supplies, i think what's happening here is the 24V power supply does not like the way charger controller trying to pull the amps out of it and the safety cutoff of the PS is activated. that's why you hear that clicking noise...
Galing mo idol,nasabukan ko po yong battery charger na transformer sa maliit na yan e gumana naman pero maliit lang kasi yong battery na gamit ko 7ah lang,
Friend, gagana yan ng maayos kung ang voltage input mo galing sa dc input mo ay within the range of the pwm charge controller. subukan mong gagamit ng mppt. It will work.
@@SolarAddict06 hindi pasok yung 24 volts hanggang 22 volts lang kung 12 volts yung battery mo kasi ang ma detect nung pwm na 12 volts lng yung system. Iba nman ang usapan kapag mppt ang charge controller
Bos ok ba pwm na bosca 60amp.eparalel sa batery.kc may pwm ako pero ang ginagamit sa ngaun mppt srne 40a.may power supply din ako na 24v.nabasa ko kc comment mo.bos sana masagot mo.thanks
Is there some way to make both the current coming from the power supply and the one coming from the PV panel flow into the controller? I would like to build a system that supplies power with photovoltaic panels when it's sunny, with mains current when it's not sunny and with batteries when there is no electricity. In a nutshell a solar ups.
@@lucam.4033 i don’t have a video yet. But already done a test on a small set, thought it is not advisable for a large set up due to dc arching. You can use a high capacity relay to select a power source ( solar panel or ac power supply) and also needed a triggering device. You can also do it manually using a double throw switch. But I will not advise to do this on a large set up. Dc arching is a big problem!
You can use high current diodes, look at the back of your panel, to make the current flow in one direction. Another solution I helped my friend with was to set the controller ro dusk / dawn mode. Use the SPC output to control a relay to toggle from PV to utility power. Best if not using the SPC output to power devices. You could use a separate dusk/dawn switch in that case.
Regulated napo kasi ang power supply..yung PMW po regulated din..kaya ayaw gumana.. mag input po kayo ng unregulated power source tuladg ng mini ceilling fan..unregulated po output nun..kapag ininput nyo ang unregulated power source ay ireregulate ng PMW ang power para mai charge ang battery..
Magandang umaga po sir.. paano naman kung yung power supply po natin direct na sa inverter hindi na dadaan sa solar controller safe parin po ba sya? Sana magawan nyo po ng content ito..
Sinubukan ko rin yan sir.ang gamit kong power supply ay sirang loptop yong anak ko, ok naman cya.ang gamit kong controler sy yong mmpt na china 900 bili ko 100 ah.
am finding it very hard to find 24v lithium/lead acid battery charger.. that does not have horrible reputations for low life expectancy. Most often I would charge a 24v lead acid bank. Could a 24v lead acid charger provide input into a solar charge controller for charging 24v lithtium bank?
Sir baguhan lang po ask kulang kung pde mag charge ng pattery gamit ang ac charger dadaan sa mppt controller tapos sa sarili nya ding kuryente kung baga ikot lang??
Boss un saksakan ng load ano.puede appliance ang puede magamit or isaksak dun.Kapag po ba ginamit natin un load na saksasakan need ba disconnect ang battery.
sir pano kaya kung lagyan ng dc.to ac inverter ung batery tapos dun isasaksak ung power suply ok lang kaya un..parang rotation lang mangyayari ok lang kaya un.salamat
Solar addict pwede ka ba gumawa ng video about solar set up na pinakamura na walang breaker motorcycle battery lng ang gamit at mppt or pwm na charge controller kc mga vlog mo puro mahal in ang gamit Sir iyong simple lang po Salamat more power
Kya cguro hindi nagana kac ang power supply at adaptor na gamit mo po is 24v bale ang na recognize ni SCC ay 24v na system at hindi 12v lalo na ang battery is 12v kaya nag blink2 try mo po ung 19v adaptor kac don malapit ang VOC ng panel kung 12v cguro
hnd b pwede pagsabayin ung panel charge at ac charging? hindi ba masmadali kung direct battery connect na ung ac charge using ac chargers may automatic full charge diaconnect naman un
ang shortcut at simple explanation bakit hindi gumana ang pwm dahil kaunti lang ang amper na dumadaloy sa charge controller, so ang tanong: bakit po sa mppt gumana, ang pinaka simple na sagot na naman ang mppt dahil ang excess volt ng power supply ikino convert nya into amper..kaya nagiging sapat ang current na dumadaloy kaya tuloy ang ligaya... dahil ang battery kasi 12v lang, ang power supply na ginamit 24v so ang halos 12 volt na excess ng power supply xang ginagawang amp ng mppt .😁..kung meron pa kayong simple explanaion e.comment nyo na.
@@SolarAddict06 wrong explanation kung bakit d gumana.una yang smps power supply eh may overcurrent protection na kapag nag shunt o lumampas sa current rating output mag auto shutoff sya.madedetect k.c nya na short ung output mo dahil malakas humigop ung battery gagana yan kung may current limiter at hatiin mo ung current na ipapasok mo sa scc...simpleng explanation at gagana sa mppt dahil may micro processor yan na mag detect sa input voltage and output voltage differential pag bumaba ung input voltage
Sir good morning.panu po kung pg sabayin mppt at pwm.sample mppt is nka connect sa panel.tapos si pwm nman sa ac power supply na dc output na 24v.pwd kaya sir
Nagtry ako Sir 24v 10 amperes Ganda ng harvest 105 ampere uminit masyasdo switching power supply kaso bumigay agad power supply.. Hindi Pala advisable. Isang araw Lang sira na.
Pede namn tlgang gawin yan scc kung 40amper 500watts kayang kaya nya yan e full charge sinubukan ko sa 12volts inverter ko gumagana sya basta mataas ang amper 40amper 500watts
There is a way to connect an external DC power source to the PWM solar charge controller. For 12V battery, use a 12V or 15V AC power transformer. I have the same PWM solar charge controller, I used that to charge 12V 7.2Ah UPS battery. I used an old 12V 0V 12V (12V center tapped) 3A AC transformer with 2 rectifier diodes (5A) and 3300uf 25V e-capacitor. And The DC Volt was around 16V, I connected that to the solar input of the PWM charger and it successfully charged the battery.
I end up here because I knew that PWM solar chargers need between 15 to 19 volts for 12v systems, and between 30 to 38v for 24v systems, and I was wondering, how to match those voltages with a 12v power source?. You solved my problem. Another solution might be to get a PWM solar controller with higher input voltage thought it is a waste of energy and the controller will work but still, is cheaper than a Mppt controller.
I would love to know if you have any diagram as how you connected them ! Cause i'm having exactly the same issue and dont feel like to waste more money on mppt controller
@@mtnshadid actually, now I'm using a 19.5V 60W laptop charger with XL4016 8A buck converter (to charge 12v 7.2ah battery). I connected the laptop charger output to XL4016 buck converter's input and it output connected to the solar charge controller's input via 5A diode. The diode will prevent the back flow of current when the SMPS is off. More information about XL4016 Buck converter ruclips.net/video/emLLK32S3vE/видео.html
@@keith_ferdinanduz it happens that i have xl4016 bunk converter, the question is if both adapters are dc and didnt work, why would the laptop adapter work ?
Sir ask ko lang po. ok lang ba kung ang solar panel 9 volts tapos yung gagamitin ko battery ay 12 volts at yung solar panel controller 12 volts din at yung solar power is 500w ok lang ba hindi ba magkaka problema sa connection
@@marvindeluna2981 dc circuit breaker po.. depende po sa size ng set up ang capacity ng breaker. Test video ko lang ito kaya di ko pinakita yung capacity ng breaker na ginamit ko
@@marvindeluna2981 pwede rin po gumamit ng fuse tulad sa mga sasakyan. Mas mura kaysa sa dc breaker. Kagandahan lng sa dc breaker kapag nagtrip off ay pwede mo ma reset. Ang fuse kapag nasunog palit na ng bago.
Ok sana kaya lang hassle ang palipat lipat ng terminal log beside hindi naman maghapon walang araw or kahit makulimlim pwede pa rin magkarga mahina nga lang boltahe
Sir, pwede ba naka connect directly ang power supply to PV breaker, pag gagamitin na yung power supply saka na lng power on, para dalawang device ang nag charge yung PV at Power Supply? One-Solar MPPT Solar Charge Controller ang gamit ko
Yes po sir. Pwede po cya ipag sabay pv to power supply connection. Piro may i lalagay Kapo ng Diode na 10.amp Para Hindi mag saguna ang daloy ng current oh ang votahi nya Yan po ang gamit ko kasi pv at power supply. Yan Lang po.😊
Do you know why PWM does not work? I am planning to do the same setup. My PWM control leaflet says NOT to connect a psu instead of panel. You would think a laptop psu 19.5VDC and 3.33A @ 60W would be no different than a 50W solar panel 🤔
Tanong ko lang po pwede ko po ba gawin yan mppt gagamitin ko pero ang mag ssuply ng charging is yung charging ng mutor ko na 14volts ang nilalabas.sana mapansin salamat po more power po
Kung series po ang battery hal. Na 48volts total ng nakaseries na batt. Dapat po ang voltage ng solar panel na ilakabit mo sa charge controller ay mas mataas sa pa sa 60 volts. Samakatuwid po ay magseseries ka rin ng solar panel para tumaas ang voltage. At dapat mas maganda kung mppt charge controller ang gagamitin
Boss gud pm. Pa2long nman. Mdali kc malowbat ang solar ko bgo ang batt 2d 12v khit hndi ko gnagamit eh kusang mgdischarge. 32o ang panel ko mppt ang cct ko. 3000w ang inverter ko pure sine wave. Tnx
Sir sa solar charge controller na yan ilan ang maximun solar input voltage? Meron kasi akong solar panel 40v ang vm, bali 315 watts sya, pwd kaya sa pwm scc na yan?
Sir ng set up ako 50w na solar panel 20ah n batery bakit may load n efan na baba agad ng 12.6v solar controler full charge nmn 14.4v my inverter ako gamit
Kuya solar may tanong po akong importante para po sana sa research naming G-12 tatanong ko po if pwede bang gamitin yung power ng mini hydro turbine kapalit ng solar panel..bali same concept lang po ito nung ginawa nyo dito
Sir lagi ko pinapanood mga video mo about solar and solar controller pero ask kolng hindi ba pwede e connect ang inverter sa load connection ng solar charge controller? At kung himdi pwede ay bakit?
Dahil pwede masira ang charge controller, mababa lang kase ang ampere/current na pwedeng ikabit sa load side ng charge controller. At alam nmn natin na ang inverter ay malaki ang current na hinuhugot. Lalo na kapag maraming load ang inverter. Direct to battery po talaga ang kabit ng inverter at hindi sa load side ng SCC.
Naka 12 volts system lang ba yan na 540 ah? Kung ganun nga... ay kailangan mo ng 100 amps na mppt jan sa system mo na yan para kayanin nia ang 1,200 watts na solar panel. Mas maganda jan kung mag 24volts system kana lang....60amps na mppt pwede na at mas maliit na wires ang kakailanganin mo.
Hindi po ito thhn.... royal cord ito bro tinanggal ko lang yung outside insulation. Pero pwede ka rin gumamit ng thhn, medyo matigas nga lang iyon. Kung 100 watts ang panel mo # 12 gamitin mo.
@@jaydedelyuenduroairsoft4x448 yun po bang sealed lead acid battery? Marami pong advantages yung ganyan na battery. No fumes (dahil sealed) Pwede indoor installation Safe sa health no need to maintain Mas matagal malow batt kaysa sa automotive battery
pwd pag samahin or pagsabayin ng chrge c solar panel at power sup na gmit pang chrge ng battery? para sana mas malaki ung watts na pumapasok sa bat. sa di ba mag bback flow papntang panel ung current galing sa power sup?
Pwede po ...kung 12 volts ang appliances katulad dito sa video. Meron po mga ilaw, efan at tv na 12 volts kaya no need ng inverter. Kung malaking appliances .. need po ng inverter
Sir tanong lang, pwede ko ba e charge ang solar battery ko gamit ang MPPT Charge controller without solar panel? Bale AC input lang. Auto disconnect naman po cguro ang MPPT pag na full charge ang battery, tama?
@@SolarAddict06 i mean gamit kapo sana variable power supply. Tyaka search mopo datasheet/spec ng scc nyo lods kung 14v minimum nyan para magstart or 15 ganun di talga gagana yan pag 12v supply gamit nyo . Try nyo po powersuppply laptop gagana yan kase nagtry nako dati ng ganyan
@@romeogasilan9113 24 volts sir yung gamit ko na power supply(di talaga gagana dto ang 12v psu). Kung yung pwm scc lang ang titingnan natin may arrow talaga na indicator na nag chacharge. Pero sa watt meter natin ay unstable ang output dahil nga ang power supply ay cc cv, di tulad sa solar panel na bumababa ang voltage kapag ikinabit sa scc. Sa mppt wala problema ang psu dahil may dc to dc converter ang mppt scc.
Malamang sir di gagana. Ginagawa kasi ng pwm controller. Hinahatak nya yong voltahe input voltage sa battery level. Tas from word pwm controller. On/off po yan. Tas yung battery mo full charge.
Tama ka idol.... Marami kase nagsasabi na gagana sa pwm controller ang mga ac chargers na mataas ang voltage.... Pero sa video na ito ay nakita nmn talaga na di pwede.
Kaya nga po nagtest ng 24volts power supply... Ang kagandahan kapag may charge controller pwede mo ma adjust ang parameter settings kumpara sa basta power supply lang. Gets mo ba lods?
Thank you for sharing! Nasagot din yung katanungan ko...
Good job sir! Keep on...
usually Mean Well produces quality power supplies, i think what's happening here is the 24V power supply does not like the way charger controller trying to pull the amps out of it and the safety cutoff of the PS is activated. that's why you hear that clicking noise...
That is true👍
How 2 order PORTABLE SOLAR charge controller & inverter AC 230V & ALL IN ONE MULTI PURPOSE OUTLET
eto ung set up na gusto ko buuin...
Galing mo idol,nasabukan ko po yong battery charger na transformer sa maliit na yan e gumana naman pero maliit lang kasi yong battery na gamit ko 7ah lang,
Ito lang pla un mga idea ng di nagshare. thanks boss! Keep sharing!!!
Friend, gagana yan ng maayos kung ang voltage input mo galing sa dc input mo ay within the range of the pwm charge controller. subukan mong gagamit ng mppt. It will work.
Pasok nmn sa voltage range bossing… at may test din sa mppt scc. Gagana talga
@@SolarAddict06 hindi pasok yung 24 volts hanggang 22 volts lang kung 12 volts yung battery mo kasi ang ma detect nung pwm na 12 volts lng yung system. Iba nman ang usapan kapag mppt ang charge
controller
Natry ko n yan boss gumagana naman ganon din may tunog. Masisira b ang SCC o yong durability ng battery
Sir pag pwm ,Doon mo ilagay e parallel mo sa battery Ang back up ac power supply mo. Nasubukan ko na yan
Bos ok ba pwm na bosca 60amp.eparalel sa batery.kc may pwm ako pero ang ginagamit sa ngaun mppt srne 40a.may power supply din ako na 24v.nabasa ko kc comment mo.bos sana masagot mo.thanks
Steker of the power supply if him put in a inverter .or in home walls. 🤔
Lods pwde magtanung ano po solar panel watts? ang pwde sa 12volts 7ah lead acid battery ok po ba ang 20watts or 25 watts?
20 watt po
@@SolarAddict06 salamat po lods
Bos pwd v h h conec ang embêter sa makina generitor para mg chard ang btry lif40 12v
Is there some way to make both the current coming from the power supply and the one coming from the PV panel flow into the controller? I would like to build a system that supplies power with photovoltaic panels when it's sunny, with mains current when it's not sunny and with batteries when there is no electricity. In a nutshell a solar ups.
Yes it is possible to have that kind of set up.
@@SolarAddict06 Have you done any experiments, uploaded a video or can you give me some advice?
@@lucam.4033 i don’t have a video yet. But already done a test on a small set, thought it is not advisable for a large set up due to dc arching.
You can use a high capacity relay to select a power source ( solar panel or ac power supply) and also needed a triggering device. You can also do it manually using a double throw switch.
But I will not advise to do this on a large set up. Dc arching is a big problem!
You can use high current diodes, look at the back of your panel, to make the current flow in one direction.
Another solution I helped my friend with was to set the controller ro dusk / dawn mode. Use the SPC output to control a relay to toggle from PV to utility power. Best if not using the SPC output to power devices. You could use a separate dusk/dawn switch in that case.
All you need is diode to both positive ( pv and power supply)
What i did is i used a buck converter with CC to clamp the current at 3a
The voltage needs to be higher, about 15-18v
Boss ano tawag dyan sa bracket na pinagkakabitan ng dc breaker mo?
DIN RAIL yan lods.
sir gamitan nyo po ng 27v na power supply output kasi centralized ang power supply niyo po
Regulated napo kasi ang power supply..yung PMW po regulated din..kaya ayaw gumana.. mag input po kayo ng unregulated power source tuladg ng mini ceilling fan..unregulated po output nun..kapag ininput nyo ang unregulated power source ay ireregulate ng PMW ang power para mai charge ang battery..
Ayos jevara
Magandang umaga po sir.. paano naman kung yung power supply po natin direct na sa inverter hindi na dadaan sa solar controller safe parin po ba sya? Sana magawan nyo po ng content ito..
jan ba sa 12v socket na yan puwede bang isaksak jan ung charger phone..nagagana ba..?
Sinubukan ko rin yan sir.ang gamit kong power supply ay sirang loptop yong anak ko, ok naman cya.ang gamit kong controler sy yong mmpt na china 900 bili ko 100 ah.
Boss, anung size ng mga wiring nyo panel to scc, scc to battery, battery to inverter?
am finding it very hard to find 24v lithium/lead acid battery charger.. that does not have horrible reputations for low life expectancy. Most often I would charge a 24v lead acid bank. Could a 24v lead acid charger provide input into a solar charge controller for charging 24v lithtium bank?
Sir baguhan lang po ask kulang kung pde mag charge ng pattery gamit ang ac charger dadaan sa mppt controller tapos sa sarili nya ding kuryente kung baga ikot lang??
Ganyan din gamit ko controller, gamit ko charger car battery charger, ok naman.
kahit na anong power suppy ang gamitin
Grabe ang galing mo talaga lods, talagang maraming matututunan dito sa channel mo, keep it up
Tnx lods
@@SolarAddict06 91l
Boss un saksakan ng load ano.puede appliance ang puede magamit or isaksak dun.Kapag po ba ginamit natin un load na saksasakan need ba disconnect ang battery.
Pwede po magkabit sa load output ng SCC na di lalagpas sa 10 amps or 120 watts.
No need na po na tanggalin ang connection ng batt.
sir pano kaya kung lagyan ng dc.to ac inverter ung batery tapos dun isasaksak ung power suply ok lang kaya un..parang rotation lang mangyayari ok lang kaya un.salamat
Pwd po bang ilagay sa controller ang 6v na battery
Solar addict pwede ka ba gumawa ng video about solar set up na pinakamura na walang breaker motorcycle battery lng ang gamit at mppt or pwm na charge controller kc mga vlog mo puro mahal in ang gamit Sir iyong simple lang po Salamat more power
gamit po kayo adaptor na 14.5v un ang sure gagana
Kya cguro hindi nagana kac ang power supply at adaptor na gamit mo po is 24v bale ang na recognize ni SCC ay 24v na system at hindi 12v lalo na ang battery is 12v kaya nag blink2 try mo po ung 19v adaptor kac don malapit ang VOC ng panel kung 12v cguro
sir pwede po bang kabitan Ng selling fan yung controller .don sa may elaw na logo???.
hnd b pwede pagsabayin ung panel charge at ac charging? hindi ba masmadali kung direct battery connect na ung ac charge using ac chargers may automatic full charge diaconnect naman un
Bos bosca na 60amp.pwm pwd kaya gaya nyang denemo mo
Good information, please bring English version 🙏
Because every single person speaks English just for you?
If you need English to understand this, maybe you should not be involved with electrical projects.
ang shortcut at simple explanation bakit hindi gumana ang pwm dahil kaunti lang ang amper na dumadaloy sa charge controller,
so ang tanong: bakit po sa mppt gumana, ang pinaka simple na sagot na naman ang mppt dahil ang excess volt ng power supply ikino convert nya into amper..kaya nagiging sapat ang current na dumadaloy kaya tuloy ang ligaya...
dahil ang battery kasi 12v lang,
ang power supply na ginamit 24v so ang halos 12 volt na excess ng power supply xang ginagawang amp ng mppt .😁..kung meron pa kayong simple explanaion e.comment nyo na.
Salamat sa paliwanag idol
@@SolarAddict06 bos merom ako 100watts solar Panela ano size na wire din elng ampere na breaker gamitin boss
@@SolarAddict06 wrong explanation kung bakit d gumana.una yang smps power supply eh may overcurrent protection na kapag nag shunt o lumampas sa current rating output mag auto shutoff sya.madedetect k.c nya na short ung output mo dahil malakas humigop ung battery gagana yan kung may current limiter at hatiin mo ung current na ipapasok mo sa scc...simpleng explanation at gagana sa mppt dahil may micro processor yan na mag detect sa input voltage and output voltage differential pag bumaba ung input voltage
Sir good morning.panu po kung pg sabayin mppt at pwm.sample mppt is nka connect sa panel.tapos si pwm nman sa ac power supply na dc output na 24v.pwd kaya sir
Ano magandang solar panel 100 watts ung halagang 1k lang po sana
True rated 100 watts solar panel is around 2,300 ~ 3,000 pesos po. Wala po mabibili na tig 1k pesos, fake yan or wrong advertisement po.
Nagtry ako Sir 24v 10 amperes Ganda ng harvest 105 ampere uminit masyasdo switching power supply kaso bumigay agad power supply.. Hindi Pala advisable. Isang araw Lang sira na.
Pede namn tlgang gawin yan scc kung 40amper 500watts kayang kaya nya yan e full charge sinubukan ko sa 12volts inverter ko gumagana sya basta mataas ang amper 40amper 500watts
Sir pwede po ba battery charger jan na 400w
Sir.ano AH ng solar controller na pwdi sa 200w na solar panel TApos battery ko 24v
good tutorials.
very useful..
Salamat bro...
Boss pwede bayan pang matagalan? Salamat sa sagot
Pwede ko rin ba gawin set up ko solar panel ko.24 volt tapus sa system ko 12volt.dba lalabas sa mmpt 24volt din.
Pwede ba gamitin ang battery charger kesa dyan power supply?
na try mo na pagsabayin ang pag charge gamit solar at wall charger?
Tanung kulang sana yung power suply ba ay kaya nyang paganahin ang inverter ng magdamagan
NO. Bakit ka pa mag inverter kung sa power outlet din ng AC nio manggagaling ang kuryente?
Hindi ka po makakatipid jan😅
@@SolarAddict06 itatry kulang po sana kung matibay ba tlga ang power suply na 30ampres
Good day po sir. Pwedi ba lagyan ng inverter kahit 25Ah lang yung bat? Or kahit 50ah
Kung lifepo4 pwede
Bos baba mulang ung aperahe ng charger.. gagana yan.. sa ngaun charger din gamit koh pang charge ng solar batt. Koh
Ilang watts/volts po ang load sa pmw scc sir?
Idol ilang amphere po ang gmit niong breaker
There is a way to connect an external DC power source to the PWM solar charge controller. For 12V battery, use a 12V or 15V AC power transformer. I have the same PWM solar charge controller, I used that to charge 12V 7.2Ah UPS battery. I used an old 12V 0V 12V (12V center tapped) 3A AC transformer with 2 rectifier diodes (5A) and 3300uf 25V e-capacitor. And The DC Volt was around 16V, I connected that to the solar input of the PWM charger and it successfully charged the battery.
I end up here because I knew that PWM solar chargers need between 15 to 19 volts for 12v systems, and between 30 to 38v for 24v systems, and I was wondering, how to match those voltages with a 12v power source?. You solved my problem. Another solution might be to get a PWM solar controller with higher input voltage thought it is a waste of energy and the controller will work but still, is cheaper than a Mppt controller.
I would love to know if you have any diagram as how you connected them ! Cause i'm having exactly the same issue and dont feel like to waste more money on mppt controller
I found it online, thank you for the tip
@@mtnshadid actually, now I'm using a 19.5V 60W laptop charger with XL4016 8A buck converter (to charge 12v 7.2ah battery). I connected the laptop charger output to XL4016 buck converter's input and it output connected to the solar charge controller's input via 5A diode. The diode will prevent the back flow of current when the SMPS is off.
More information about XL4016 Buck converter ruclips.net/video/emLLK32S3vE/видео.html
@@keith_ferdinanduz it happens that i have xl4016 bunk converter, the question is if both adapters are dc and didnt work, why would the laptop adapter work ?
Sir ask ko lang po. ok lang ba kung ang solar panel 9 volts tapos yung gagamitin ko battery ay 12 volts at yung solar panel controller 12 volts din at yung solar power is 500w ok lang ba hindi ba magkaka problema sa connection
sir lodi ang angas po ng set up mo..😍
Salamat lods
sir lods ano pu ba ung breaker na gamit mo?
@@marvindeluna2981 dc circuit breaker po.. depende po sa size ng set up ang capacity ng breaker. Test video ko lang ito kaya di ko pinakita yung capacity ng breaker na ginamit ko
salamat sir lodi..😊 kea pla now ku lng nkita ung ganian setup..tutorial mu smin lods parang safe po tignan ung ganyan na setup sir lodi..
@@marvindeluna2981 pwede rin po gumamit ng fuse tulad sa mga sasakyan. Mas mura kaysa sa dc breaker. Kagandahan lng sa dc breaker kapag nagtrip off ay pwede mo ma reset. Ang fuse kapag nasunog palit na ng bago.
pwede po ba gumamit ng 24v 20a na power supply? yan po kasi available kong power supply, para hindi na sana bumili
Same lang din sakin..
hindi po ba mgnda ang pwm sa solar panel.. kc ang hina ng harvest na napasok sa watt meter ko papuntang battery.. 100w panel ko napasok lmg ay 30watts
Mag mppt po kayo ganyan din dati gamit ko pwm na bosca hind mapagana ricecoker ko palit ako mppt srne ayun gumagana na ricecoker at washing machine
Ok sana kaya lang hassle ang palipat lipat ng terminal log beside hindi naman maghapon walang araw or kahit makulimlim pwede pa rin magkarga mahina nga lang boltahe
How much po bili nyo Sir ng gnyang mppt scc?
Around 2.5k peso po dati.... 30amps mppt
So MPPT lang siya gagana boss idol.
Sir, pwede ba naka connect directly ang power supply to PV breaker, pag gagamitin na yung power supply saka na lng power on, para dalawang device ang nag charge yung PV at Power Supply? One-Solar MPPT Solar Charge Controller ang gamit ko
Yes po sir. Pwede po cya ipag sabay pv to power supply connection. Piro may i lalagay Kapo ng Diode na 10.amp Para Hindi mag saguna ang daloy ng current oh ang votahi nya
Yan po ang gamit ko kasi pv at power supply. Yan Lang po.😊
Sir panu itest kung ilang amps. Pumapasok sa scc or mppt?
Gamit po kayo ng clamp meter or mag install ng watt meter
Do you know why PWM does not work? I am planning to do the same setup. My PWM control leaflet says NOT to connect a psu instead of panel.
You would think a laptop psu 19.5VDC and 3.33A @ 60W would be no different than a 50W solar panel 🤔
It will easily work.
Very interesting. Thanks for sharing. New friend here.
Thank you sisters...
Will see you soon.🤗
malakas ba yan sa kuryente yung power supply?salamat sa sagot
Tanong ko lang po pwede ko po ba gawin yan mppt gagamitin ko pero ang mag ssuply ng charging is yung charging ng mutor ko na 14volts ang nilalabas.sana mapansin salamat po more power po
Tanong kolang sir kung kaya ba ng charge controller yung series battery mga 2 to 4 batteries ? Thank you
Kung series po ang battery hal. Na 48volts total ng nakaseries na batt.
Dapat po ang voltage ng solar panel na ilakabit mo sa charge controller ay mas mataas sa pa sa 60 volts.
Samakatuwid po ay magseseries ka rin ng solar panel para tumaas ang voltage.
At dapat mas maganda kung mppt charge controller ang gagamitin
@@SolarAddict06 thank you sir
Boss gud pm. Pa2long nman. Mdali kc malowbat ang solar ko bgo ang batt 2d 12v khit hndi ko gnagamit eh kusang mgdischarge. 32o ang panel ko mppt ang cct ko. 3000w ang inverter ko pure sine wave. Tnx
idok saan po makabili ng ac charger na ganyan, salamat po
Sir sa solar charge controller na yan ilan ang maximun solar input voltage? Meron kasi akong solar panel 40v ang vm, bali 315 watts sya, pwd kaya sa pwm scc na yan?
Dapat po jan ay mppt na scc po ang bagay jan
Dpat cguro na try Mo dn ung transformer type na charger bka gumana po
boss, normal lang ba kung ang reading nang pwm controller ay 12.7V tapos nong tinest ko using voltmeter it reads 13V?
pa help po thanks
Sir ng set up ako 50w na solar panel 20ah n batery bakit may load n efan na baba agad ng 12.6v solar controler full charge nmn 14.4v my inverter ako gamit
Normal lang yan kase maliit ang battery mo
Maliit b ang 20ah sa 50watts na solat panel,ano b ang dapat,salamat
ilan watts panil mo lods?
Kuya solar may tanong po akong importante para po sana sa research naming G-12 tatanong ko po if pwede bang gamitin yung power ng mini hydro turbine kapalit ng solar panel..bali same concept lang po ito nung ginawa nyo dito
Ibang charge controller ang ginagamit para sa turbine wind or hydro... kailangan kase ng dump load para doon.
@@SolarAddict06 ok po Salamat po kuya sayang kala ko pwede
taasan mo output ng power supply na adjust yan e set mu sa 16v/18v gagana na yan ng maayus
24v volts na yan eh
Boss. pwede ba yung ganyang SCC sa Lifepo4??
Hindi pwede yung kulay blue na pwm scc.
Yung mppt pwede po.
@@SolarAddict06 ung puting pwm po?? pwede??
@@harold1212121 oo bro yun pwede.
@@SolarAddict06 salamat po boss. salamat
Sir lagi ko pinapanood mga video mo about solar and solar controller pero ask kolng hindi ba pwede e connect ang inverter sa load connection ng solar charge controller? At kung himdi pwede ay bakit?
Dahil pwede masira ang charge controller, mababa lang kase ang ampere/current na pwedeng ikabit sa load side ng charge controller. At alam nmn natin na ang inverter ay malaki ang current na hinuhugot. Lalo na kapag maraming load ang inverter.
Direct to battery po talaga ang kabit ng inverter at hindi sa load side ng SCC.
@@SolarAddict06 maraming salamat sir now alam kuna
Ilang ampere ang DC breaker MO boss
10 amps yan boss... yan kase pinakamababa na availbale sa online store.
Nice one bro..ty..
tanong lang idol Ang AC supply gamit NATIN pag labas Jan sa controller AC din bah or DC papunta sa ating battery?
Dc na lods
@@SolarAddict06 idol convert ac to DC yang mppt controller?
@@junreycoh9853 naconvert na yung galing sa power supply
ilang amps po na mppt need ko sa 540ah battery 12v
Naka 12 volts system lang ba yan na 540 ah?
Kung ganun nga... ay kailangan mo ng 100 amps na mppt jan sa system mo na yan para kayanin nia ang 1,200 watts na solar panel.
Mas maganda jan kung mag 24volts system kana lang....60amps na mppt pwede na at mas maliit na wires ang kakailanganin mo.
Sir #thhn wire b gmit mo s breakers from scc? Anong number?
Hindi po ito thhn.... royal cord ito bro tinanggal ko lang yung outside insulation.
Pero pwede ka rin gumamit ng thhn, medyo matigas nga lang iyon.
Kung 100 watts ang panel mo # 12 gamitin mo.
Bro you save me 😁
with a 19v 4.74 A it wiil work ?
Sir. Sa 100 ampher. Sa. Battery. Ilng. Wats. N solar cotroler. Ang. Kya
100 watts panel 20 amps controller 50ah battery
Sa. Inverter. Sir. Ilng. Pwide
Pwide. Nba. Yan. Sir. Kahit. Wla. Breaker
@@jhontv1678 300 or 500 watts lang na inverter kase maliit battery.
Dapat may breaker po
Salamat. Sir
Bos pwd bang mag gamit Ng 10amp na solar controller?
Pwede po
Boss ilang watts solar panel bibilhin ko at anong controller, gagamitin ko lang pang charge ng mga powerbanks
Pwede na po jan 20 watts na panel
10 amps na charge controller
7ah na battery...kayang kaya na power bank mo. Pwede pa pang ilaw na 12volts dc led.
@@SolarAddict06 kailangan pa ba battery boss? Pwede ba solar + controller to powerbank?
Sir d b masmadali kng battery charger n lng ang ikabit mismo sa battery
Yes po.... tama po kayo.
Response video lang ito doon sa mga member sa solar group na gumagamit ng pwm scc sa ac power supply
@@SolarAddict06 halos same set up din po ako at ngayun ko lang nakita ung gnyang setup anu po ung pros yan compared sa regular batt charger
@@jaydedelyuenduroairsoft4x448 yun po bang sealed lead acid battery?
Marami pong advantages yung ganyan na battery.
No fumes (dahil sealed)
Pwede indoor installation
Safe sa health
no need to maintain
Mas matagal malow batt kaysa sa automotive battery
pwd pag samahin or pagsabayin ng chrge c solar panel at power sup na gmit pang chrge ng battery? para sana mas malaki ung watts na pumapasok sa bat. sa di ba mag bback flow papntang panel ung current galing sa power sup?
Anong solar panel ang pwede sa 30amp scc sir?
Up to 400 watts lods…
@@SolarAddict06 100 watts sir, pwede lang din ba?
madali yan billi na lang ng sadyang 12volts charger minsan din lang nman gagamitin
Sir, pano ko iset up ang aking solar charge controller sa battery ko? Ilang amps ang gagamitin kong controller sa battery ko at solar panel ko?
ilang watts po panel nio?
35watts lang po. Kc walang budget. Salamat po.
Sana sir mag upload ka ng computation ng maliliit na set up. Ilang ah ng battery, solar controller at panel.
@@dadoguillermo4613 meron na sir ako na upload, check nio po mga video ko.
50 watts na panel at 22ah na battery. Halos pareho din po ng 35 watts panel
baka po my set up kayu ng ganito for STARLINK. ty po!!
Boss solar,tanong ko lang po kung gagana ba yung appliances kung hindi na gagamitan ng solar inverter?at paano gagawin ang set up nya?salamat po
Pwede po ...kung 12 volts ang appliances katulad dito sa video.
Meron po mga ilaw, efan at tv na 12 volts kaya no need ng inverter.
Kung malaking appliances .. need po ng inverter
@@SolarAddict06 ok po salamat
Sir tanong lang, pwede ko ba e charge ang solar battery ko gamit ang MPPT Charge controller without solar panel? Bale AC input lang. Auto disconnect naman po cguro ang MPPT pag na full charge ang battery, tama?
Pwede po...
Gagana yan kahit anong CONTROLLER DEPENDE LNG SA MINIMUM OPERATING VOLTAGE. NUN SCC KUNWARI KUHA KA NG 24V POWERSUOPLY TRY MO SA PWM GAGANA PO YAN
Natry na po sa video kita nio nmn na nag pupulse yung output nia
@@SolarAddict06 i mean gamit kapo sana variable power supply. Tyaka search mopo datasheet/spec ng scc nyo lods kung 14v minimum nyan para magstart or 15 ganun di talga gagana yan pag 12v supply gamit nyo . Try nyo po powersuppply laptop gagana yan kase nagtry nako dati ng ganyan
@@romeogasilan9113 24 volts sir yung gamit ko na power supply(di talaga gagana dto ang 12v psu). Kung yung pwm scc lang ang titingnan natin may arrow talaga na indicator na nag chacharge. Pero sa watt meter natin ay unstable ang output dahil nga ang power supply ay cc cv, di tulad sa solar panel na bumababa ang voltage kapag ikinabit sa scc.
Sa mppt wala problema ang psu dahil may dc to dc converter ang mppt scc.
@@SolarAddict06 depende nga lang sguro sa SCC lods kase nagtry ako dati sa ganyan ko nagana naman
@@romeogasilan9113 anong brand ng scc gamit mo bro?
Malamang sir di gagana. Ginagawa kasi ng pwm controller. Hinahatak nya yong voltahe input voltage sa battery level. Tas from word pwm controller. On/off po yan. Tas yung battery mo full charge.
Tama ka idol....
Marami kase nagsasabi na gagana sa pwm controller ang mga ac chargers na mataas ang voltage....
Pero sa video na ito ay nakita nmn talaga na di pwede.
@@SolarAddict06 gagana po sir dahil na try ko. Yong gamit ko AC battery charger12v 12amps. to solar charge controller na 30amps. Na try kona ok siya.
@SolarAddict tv gagana po sir dahil na try ko. Yong gamit ko AC battery charger12v 12amps. to solar charge controller na 30amps. Na try kona ok siya.
@@zharvillanueva4224 kung ac charger na 12v ay i direct nio na lang po sa battery wag nio na padaanin sa scc
Pg power supply i rekta mo n s battery ..12v lng kya ng controller eh..
Kaya nga po nagtest ng 24volts power supply...
Ang kagandahan kapag may charge controller pwede mo ma adjust ang parameter settings kumpara sa basta power supply lang.
Gets mo ba lods?