Bs7 Ns200 metor console fitted for Bs4 Ns200 and showing Gear indicator.. Make a video on that topic.... that video will go far helpfull for Ns200 riders...
It can't bro 1.its fi 2.it has ecu which calculate the dte and all stuff 3.even if gear indicator works . The check engine light will be always on 4.the speed sensor working is highly doubt.
After replacing my fork tubes, my mechanic had initially put only 175 ml per tube and suspension felt wobbly and bike was bouncing at high speeds.....the bike felt really sluggish on turns and bottomed out during braking. Went to a different mechanic and added another two bottles 175+175= 350 ml per tube. I prefer this setup now. Suspension is mildly stiff but front end responds better than stock. Note:- If you ride fast and do Cornering, go for this setup...if you like city commuting and rarely do 100kmph+ stick to a softer setup.
I also just changed the shock oil because my right shock was leaking oil. I use ATF oil. Initially I filled 280ml for each shock, but I felt it was very hard. Finally I reduced it by about 18ml (to 262ml). This setting is quite comfortable for me. Feels stiff but stable. My weight is 90kg
Hii....dear very good diy video😃😃....if we have to put motul fork oil 20w in KTM front fork how much ML motul fork oil we need to pour inside , as stock ktm fork oil recommend 440 ml ...? 🤔
The service manual of NS 200 recommended 280ML of sae 10w20 grade oil for each fork. Isn't the 20w motul with 350ml each side is it too much oil which might become very stiff and excess oil lead to leak over oil seals after some time ?! Give us a good explanation please ? @arkionx
Hi @jasvanthoegasus, Yes 280ml is recommended but it’s not a fixed standard. And also as mentioned in the video, based on the oil level and your preference, you can increase or decrease the oil level to make your suspension softer or harder. Moreover don’t worry about the oil seal as excess oil will not damage the oil seal as there is plenty of space for the oil to circulate inside the fork tube, and I have been using the same 350ml quantity with no issues.
@@ARKIONXMy NS160 have now clocked 30k kms and now it's suspension feels too stiff.. What should I do for its maintenance i;e oil change Or something other.?
![KTM Fork Oil Seal Change : RC / Duke 125/200/390 [ Part 2 ]](/img/1.gif)
He is doing way better work than bajaj service centerss😂😂😂😂😂😂😂,
Good work bro❤
Bs7 Ns200 metor console fitted for Bs4 Ns200 and showing Gear indicator.. Make a video on that topic.... that video will go far helpfull for Ns200 riders...
Is it worked?
It can't bro
1.its fi
2.it has ecu which calculate the dte and all stuff
3.even if gear indicator works . The check engine light will be always on
4.the speed sensor working is highly doubt.
After replacing my fork tubes, my mechanic had initially put only 175 ml per tube and suspension felt wobbly and bike was bouncing at high speeds.....the bike felt really sluggish on turns and bottomed out during braking. Went to a different mechanic and added another two bottles 175+175= 350 ml per tube. I prefer this setup now. Suspension is mildly stiff but front end responds better than stock. Note:- If you ride fast and do Cornering, go for this setup...if you like city commuting and rarely do 100kmph+ stick to a softer setup.
❤❤❤ you really make videos that we don't usually find on RUclips
seeing the video for changing the front master cylinder I'm changed the major kit thank you bro
I also just changed the shock oil because my right shock was leaking oil. I use ATF oil. Initially I filled 280ml for each shock, but I felt it was very hard. Finally I reduced it by about 18ml (to 262ml). This setting is quite comfortable for me. Feels stiff but stable. My weight is 90kg
Hii....dear very good diy video😃😃....if we have to put motul fork oil 20w in KTM front fork how much ML motul fork oil we need to pour inside , as stock ktm fork oil recommend 440 ml ...? 🤔
Make video on installing bs7 ns 200 usd fork on old ns 200
hi bro your videos most helping me ,any problem for my bike i will see your video as required once instead of search in gool thank you so mush bro
u make it look too simple ❤🔥
is it 11mm or 14mm alleykey?
It's 14mm
What if i continue using bike without making it? What harm does it cause ? And how long can i use bike without making it
Very good video 👏👏
bro make a video on carburetor tuning as well 👍
what size of allen key
The size of the Allen key to remove the top bolt on the fork is 14mm, not 11mm
CAN WE CLEAN THE SPRING WITH DIESEL
My rs200 has handle vibration problem at 80km and pulling left any solution???
I too upgraded my FZ25 fork oil from 10w to 20w Motul oil. But the suspension turned out too hard. It seems I'm riding a cycle.
Ns200 bs6 fork oil capacity??
3 bottle 175 ml
Fork oil price
The service manual of NS 200 recommended 280ML of sae 10w20 grade oil for each fork. Isn't the 20w motul with 350ml each side is it too much oil which might become very stiff and excess oil lead to leak over oil seals after some time ?! Give us a good explanation please ? @arkionx
Hi @jasvanthoegasus,
Yes 280ml is recommended but it’s not a fixed standard. And also as mentioned in the video, based on the oil level and your preference, you can increase or decrease the oil level to make your suspension softer or harder.
Moreover don’t worry about the oil seal as excess oil will not damage the oil seal as there is plenty of space for the oil to circulate inside the fork tube, and I have been using the same 350ml quantity with no issues.
How much amount of fork oil by default come from company bro?
@@princeashish3536approx 262 ml per fork for ns rs
In short video you said 180 ml and in full video you said 250-350,400 ml. Please explain bro
350 ml in one stem or its a total of 2 stems?
When to change my bike suspension oil how do I know ?
Once every 10-15k kms or every year.
@@ARKIONXMy NS160 have now clocked 30k kms and now it's suspension feels too stiff.. What should I do for its maintenance i;e oil change Or something other.?
How much oil should I use in rs 200
Same as NS bro.
My mechanic put 175ml on each and it feels soft ,and on every bump /even small pot hole it compresses complete and makes a thud sound
Bro do video for fog lamp
O ring should be replaced of the top l n key nut