Just used your video to help with replacing my washing machine door handle. So straight forward. Delighted I have small tool box under my sink. Thank you.
for anyone struggling to rebuild the mechanism and threading through the pin. just build the handle, spring and pin. Put a small piece of cotton down through the hole and tie it tight. Put the lot back into the door and push the pin through. Worked like a charm after 30 minutes of titting about.
Indesit WIN 600 washing machine, lock LED is always RED ON, not blinking, but steady RED ON, and Could not close door using door handle!? Could you please help me...Thanks in advance
You missed out the part where the springs have to be tensioned across to make the handle bounce. We spent ages trying to sprag it through the crack with a thin strip of metal, till we found someone in the know who "pushed across from one side"? (we didn't see them do it) so it's great you made a free video, but 'simply reassemble' didn't cover it :(
The handle was pulled hard so there is a slight crack. The lock etc. are inorder. Can the latch be patched so that the slight crack which might tear further on use can be mend.The frontload machine being an old model am not getting the latch in India unless can locate it in the junk mkt. Rest of the machine is fine,
Hello I want your assistance I want to change the washing machine the handle of the door The brand is indesit W120EU The original code is c00075323.I have seen several pictures in the internet who is ready but I do not know what is the correct there is a video on the model of LAUNDRY if you know HELP ME thanks.
Thank you taking the time to make this video. I fixed my washer/dryer unit forr a few dollars.
Just used your video to help with replacing my washing machine door handle. So straight forward. Delighted I have small tool box under my sink. Thank you.
for anyone struggling to rebuild the mechanism and threading through the pin. just build the handle, spring and pin. Put a small piece of cotton down through the hole and tie it tight. Put the lot back into the door and push the pin through. Worked like a charm after 30 minutes of titting about.
Thank you so much ❤
Indesit WIN 600 washing machine, lock LED is always RED ON, not blinking, but steady RED ON, and Could not close door using door handle!? Could you please help me...Thanks in advance
You missed out the part where the springs have to be tensioned across to make the handle bounce. We spent ages trying to sprag it through the crack with a thin strip of metal, till we found someone in the know who "pushed across from one side"? (we didn't see them do it) so it's great you made a free video, but 'simply reassemble' didn't cover it :(
that's the tricky part with my handle too - tensioning the spring
Thank you for help, it was exactly what I needed!
The handle was pulled hard so there is a slight crack. The lock etc. are inorder. Can the latch be patched so that the slight crack which might tear further on use can be mend.The frontload machine being an old model am not getting the latch in India unless can locate it in the junk mkt. Rest of the machine is fine,
Ok so I bought an fit the new door handle but the door is still not closing tight . also fit new mechanism on inside what am I doing wrong
I took the door off by the hinge that attaches to the machine now it won't go back on as the screws are not biting
Hello I want your assistance I want to change the washing machine the handle of the door
The brand is indesit W120EU The original code is c00075323.I have seen several pictures in the internet who is ready but I do not know what is the correct there is a video on the model of LAUNDRY if you know HELP ME thanks.
Very good TX u