@@bhupeshmishra1052 I'm not an expert but I think sometimes it could be the solution but it can also be a problem in the screen conector or it's just that the chip (GPU) is damaged
@@LemonCakeOfficial you are right bro , I took it to repair shop, replaced connector cable ,still problem is there, and it was found that there is problem with gpu..
Very nice job. I remember when BGA first came out and they said there was no way to reball a device - and back then I'm sure there wasn't. Now with the right tools and materials, it can be done. Two comments- 1) where is your anti-static strap and 2) is your shirt anti-static since you wiped the DIMM on your shirt?!
US salaries are much higher, for this kind of repair payment charge would be extremely high, so it doesn't really makes sense - easier to buy a new one.
Tuve a mi mano una laptop que nadie podia arreglar... que serviría ya solo "como máquina de escribir"... y con agrado la regalé a un amigo en Zárate a ver si él encontraba una persona como el que veo ahora que ingresa a todo lo del cuerpo de la laptop appal alemana. CONGRATULACIONES a esas mentes que dominan estas técnicas de forma admirable
Im Mozambican, i speak portuguese! Bom dia, fui formado pelo Instituto Superior Politécnico de Tete, neste exacto momento estou muito grato pelos seus tutoriais relativos a Hardware e software, e agradecia e espero de mais Explicações a respeito de I.T. Os seus videos me ajudam bastante no meu treinamento. bom trabalho.
What an amazing share as I was one of the many laptop owners who suffered from the NVidia Graphics issue where the heat of the mother board made the card loose contact and the fix was reballing
Holy crap! I'm surprised someone is even doing this! Reballing is probably viable only for high-end laptops, because it must be a fairly pricey operation...
ESD is not a major problem in the repair process unless it is an actual production line. However, I recommend wearing gloves and suitable fume extractor for your health.
Thanks for your comment , ESD wrist is a cheap solution for esd protection , but we are covered all work bench with ESD MAT ( search on Google ESD mat) so doesn't Wearing Every time esd wrist , many people don't know about ESD MAT its quite costly , ESD MAT always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mat on the table , also foot mat not recorded in video ( when i make this video i never expect ESD realted questions in comment box otherwise i record it first for people who asking for ESD protection )
Que bueno es ver que hay gente con estas habilidades y esas máquinas vuelven al circuito de uso. Es una pena que las empresas manden a destruir máquinas que debidamente reparadas dejan de ser basura.
@Tim Milgart And you believe this bullshit ??? I've never used it, just touch a piece of metal and discharge static electricity, in my opinion you take the fairy tales too seriously.
thanks for comment, if you can watch this vodeo again , we are use ESD mate (blue color) on the table , my service. all table covered with ESD mate ( its costly so many user use wristband instead of ESD MATE) also in working area not allowed nylon or woolen clothes, also not allow plastic chair .
@Tim Milgart ESD wrist is a cheap solution for esd protection , but we are covered all work bench with ESD MATE ( search on Google ESD mate) so doesn't Wearing Everytime esd wrist , many people don't know about ESD MATE its quite costly , ESD MATE always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mate on the table , also foot mate not recorded in video ( when i make this video i never expect ESD realted questions otherwise i record it first for people who asking for ESD protection )
Bardzo dobre, na grafike dał ok 4W termopad a na hubryde blaszke :) , o sposobie czyszczenia układu pominę, gdzie jakies imadełko, a nie obracanie gorącym ukladem wokoło, pewnie z dołu kondensatorki poprzesówane, nie no, naprawdę.
I love how he tests the board with the laptop like "Plug it in, cross my fingers it works- Okay it works, *unplug~ - Alright, get it back out of here."
Excelente!! Todo me ha gustado muy grande con muchas cosas destaco el saloncito de la parte de vivienda que muebles!! Este tipo de abandonos es como 3 por tantas cosas que admirar.Bravo!!!
Mano. Muito obrigado! Meu carregador original deu esse problema, eu não sabia comprei outro, depois de um tempo o mesmo problema nesse novo carregador. Resultado... Foi exatamente esse problema e resolvi seguindo suas dicas.
Nice work man! It's a hard job and need a lot of time and skills to make it working again! I want to have a job like this, because i'm interested in this things.
Hello, first thank you very much for uploading this video.clearing the ball on the motherboard chipset and soldering temperature many degrees.I have been applying high heat up the solder that saw göün of copper while the cleaning process
Me surgieron varias preguntas: Qué temperatura le diste para que peguen las bolas, cuánto tiempo? Cómo centraste el BGA en la PCB? Cuánto tiempo le diste de calentamiento al flujo de aire caliente y a qué temperatura? Y por último, precalentaste o aplicaste calor por abajo primero al BGA para pegar las bolas y segundo a la PCB para pegar el BGA? No sé si me expliqué, y si lo hice, puedes responder mis preguntas?
Thank for your sharing. I learn and understand a lot of steps you apply to this motherboard. May I know what is the purpose of yellow tape in 10:58. You cut that tape for a short strip and apply on to the chip. Is it the conductor tape or double side glue tape or for grounding purpose ? Thank
Even if you claim to use wrist straps and mats for ESD safety, you should never ever be near or come in contact with any object that generates ESD while touching the circuitry. Being grounded doesn't mean you are immune to generating a charge from other objects in the area.
Thanks for your comment , ESD wrist is a cheap solution for esd protection , but we are covered all work bench with ESD MAT ( search on Google ESD mat) so doesn't Wearing Every time esd wrist , many people don't know about ESD MAT its quite costly , ESD MAT always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mat on the table , also foot mat not recorded in video ( when i make this video i never expect ESD realted questions in comment box otherwise i record it first for people who asking for ESD protection )
@@HarshadPatel I know for sure it says in official ESD precaution guides that it doesn't matter if you have an "ESD MAT" (It's not spelled mate, learn proper English please) You still need to keep non-static safe stuff away from your work area. But go ahead, do what you wanna do...
So what was the final for all that what was achieved other than the the outstanding work. You sir are doing your superman thing in the matrix. I'm not aware of the parameters was it trash did bench mark double was t a like new refresh? Thanks and sorry for being the guy who ask what is happing every 10 min instead of watching the movie
parabéns guerreiro excelente trabalho um dia eu aprendo a fazer um serviço assim pois estou no começo da profissão e tenho muito o que ver e aprender ainda parabéns sou de fortaleza ceara
cool job! comments, sound, used tools and procedures would be a great addition. Nice to learn about that mold. What's the spray you use and the stuff you put on with the brush for example? temperature profile?
i used to do this in my work place before, it so deppresing for the first time, sometimes the ball didnt stick to the chip when i removed the plate and must do it manually. but its worth it when its done
gloves use for ESD protection and also ESD wrist is a cheap solution for esd protection , but we are covered all work bench ESD MATE ( search on Google ESD mate) so doesn't Wearing Everytime esd wrist , many people don't know about ESD MATE its quite costly , ESD MATE always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mate on the table , also foot mate not recorded in video ( when i make this video i never expect ESD realted questions otherwise i record it first for people who asking for ESD protection )
What's the purpose of the small strip of kapton tape? Is it to hold the chip in place or to show the processor has been worked on? From my experience fixing and parting out friends' old broken laptops, it's very tedious work! Can't imagine how you must feel after doing this all day, id have tunnel vision after!
People complain about AS wrist-band,,,, I can and do wear them on my ankle often, perhaps he does as well. Also if you are barefoot on the ground, or grounded metal you will not build up Static charge. :-P
ESD wrist is a cheap solution for esd protection , but we are covered all work bench with ESD MATE ( search on Google ESD mate) so doesn't Wearing Everytime esd wrist , many people don't know about ESD MATE its quite costly , ESD MATE always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mate on the table , also foot mate not recorded in video ( when i make this video i never expect ESD realted questions otherwise i record it first for people who asking for ESD protection )
I wish I knew how to do this stuff because I threw out an IBM ThinkPad that was pretty nice due to randomly getting no video or USB malfunctioning. I couldn't find definitive information on the problem but the info I did find seemed to point to a faulty southbridge chip.
Great job. I'd like to know if it's easy to buy the stencil. I mean, is the stencil a standard one? Does each gpu model has its own stencil type? Thanks.
Very interesting, I very much lack the skill to do this but I understand the principle behind it. But what was that greenish transparent tape you where putting on the heatsink mounts?
For real guys??? Nowhere is there an antistatic strapping in site, these are methods used is Asia I can Imagine, but I for one wouldn't want my CPU to be handled this way !!
HP Business Notebook PCs - System Fan (90b) error message on startup This document pertains to HP and Compaq notebook PCs. When starting the computer, the following error appears on the screen: The system has detected that a cooling fan is not operating correctly. Continued operation is not recommended and may cause unpredictable behavior that could result in random shutdown, data loss or possible system damage. The system will shut down in 15 seconds. To prevent shutdown and continue operation, press the Enter key now. System Fan (90b) In addition to this error, the system fan may spin faster and become louder.
what material did you use in this tutorial? also is that a dedicated laptop gpu? I didn't know it's possible to remove them from the motherboard. waiting for your reply thanks in advance
How do you know when a chip needs recalling though? And are chips like this tied to a motherboard or can they be replaced?? For example: can the APU of the Xbox One be replaced or is it tied down t9 the board itself? Thanks! 😄
Thank you for the video! Very informative! Did you use the ultrasonic vibration cleaner to take the stencil of the chip or to clean it? Also do you think an IR station is better or a hot air station is better? Thank you!
Hello, let me know how much hot gun temperature we can apply on stencil after placing balls on chip, and how much temperature we can set on bga machine for sticking balls of stencil to chip. thanks.
I thought I was good with Computer hardware then I discover this wizard. I am now going to play with my lego to make myself feel like a master looool
we throw most pc hardware out ,imagine if ppl like him increase we can reduce ewaste n also bottomline of PC hardware companies
instablaster...
My sony Vaio laptop have graphic card issue ,as it shows green lines,dots on the display ,will this process work for this problem??
@@bhupeshmishra1052 I'm not an expert but I think sometimes it could be the solution but it can also be a problem in the screen conector or it's just that the chip (GPU) is damaged
@@LemonCakeOfficial you are right bro , I took it to repair shop, replaced connector cable ,still problem is there, and it was found that there is problem with gpu..
Very nice job. I remember when BGA first came out and they said there was no way to reball a device - and back then I'm sure there wasn't. Now with the right tools and materials, it can be done. Two comments- 1) where is your anti-static strap and 2) is your shirt anti-static since you wiped the DIMM on your shirt?!
thanks for comment , you can read description regarding esd protection
This guy is next level, he is a wizard I am sure of it. This is magic
That's easy
In the USA most places don't even have Half the skills or tools you have. Repairing a laptop at this level is considered magic to most american shops.
US salaries are much higher, for this kind of repair payment charge would be extremely high, so it doesn't really makes sense - easier to buy a new one.
@@plohish1337 agree, most of the americans just depends on their money they do not repair they buy new one
@@plohish1337 It makes sense if you care about the environment, and saving resources.
i came for the pink nails, and stayed for the great job. (ps. to get rid of "pink" nails, just tweak the camera option "White Balancing" (no kidding)
Necromancer level 99999 - you revived them all :-) in top 10 satisfying videos :-)
Tuve a mi mano una laptop que nadie podia arreglar... que serviría ya solo "como máquina de escribir"... y con agrado la regalé a un amigo en Zárate a ver si él encontraba una persona como el que veo ahora que ingresa a todo lo del cuerpo de la laptop appal alemana. CONGRATULACIONES a esas mentes que dominan estas técnicas de forma admirable
Im Mozambican, i speak portuguese!
Bom dia, fui formado pelo Instituto Superior Politécnico de Tete, neste exacto momento estou muito grato pelos seus tutoriais relativos a Hardware e software, e agradecia e espero de mais Explicações a respeito de I.T. Os seus videos me ajudam bastante no meu treinamento. bom trabalho.
I just love to see a master like this doing his craft
What an amazing share as I was one of the many laptop owners who suffered from the NVidia Graphics issue where the heat of the mother board made the card loose contact and the fix was reballing
thank you for your appreciation
not sure how I ended up here,
but very entertaining!
Holy crap! I'm surprised someone is even doing this! Reballing is probably viable only for high-end laptops, because it must be a fairly pricey operation...
This is a Great Tutorial , but the only problem With this is that You still can't do it after watching the tutorial
Well, this is not a good tutorial, but that's because it's not a tutorial.
you need practice
I already did for Xbox
ESD is not a major problem in the repair process unless it is an actual production line. However, I recommend wearing gloves and suitable fume extractor for your health.
Thanks for your comment , ESD wrist is a cheap solution for esd protection , but we are covered all work bench with ESD MAT ( search on Google ESD mat) so doesn't Wearing Every time esd wrist , many people don't know about ESD MAT its quite costly , ESD MAT always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mat on the table , also foot mat not recorded in video ( when i make this video i never expect ESD realted questions in comment box otherwise i record it first for people who asking for ESD protection )
I am like 100 million miles away from trying something like this.
your have the gift my son.
Well, who needs ESD rules or antistatic hand gloves or Earthing!!!! This damm Laptop raise from the ashes.
Que bueno es ver que hay gente con estas habilidades y esas máquinas vuelven al circuito de uso. Es una pena que las empresas manden a destruir máquinas que debidamente reparadas dejan de ser basura.
When I need rework done, I want this guy.
good job but you should wear gloves and use a filtered exhaust fan. that stuff is real bad for you
Master, please try to add audio to your video and explain some of the things you do cos some of us would like to learn. great work! Thumbs up
A great technician! Great video, it was good to see a professional "operate" this way.
@Tim Milgart And you believe this bullshit ???
I've never used it, just touch a piece of metal and discharge static electricity, in my opinion you take the fairy tales too seriously.
thanks for comment, if you can watch this vodeo again , we are use ESD mate (blue color) on the table , my service. all table covered with ESD mate ( its costly so many user use wristband instead of ESD MATE) also in working area not allowed nylon or woolen clothes, also not allow plastic chair .
ESD bracelet is a cheap solution , always recommend use ESD table Mate ( its quite costly but perfect solution for antistatic charge )
@Tim Milgart ESD wrist is a cheap solution for esd protection , but we are covered all work bench with ESD MATE ( search on Google ESD mate) so doesn't Wearing Everytime esd wrist , many people don't know about ESD MATE its quite costly , ESD MATE always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mate on the table , also foot mate not recorded in video ( when i make this video i never expect ESD realted questions otherwise i record it first for people who asking for ESD protection )
Que pena que sem essa máquina não tem como fazer esse serviço. E a máquina é um absurdo
Bardzo dobre, na grafike dał ok 4W termopad a na hubryde blaszke :) , o sposobie czyszczenia układu pominę, gdzie jakies imadełko, a nie obracanie gorącym ukladem wokoło, pewnie z dołu kondensatorki poprzesówane, nie no, naprawdę.
I'm not on IT nor do I have a laptop.. and I had to see the whole video!!!
Great video, you are very talented. 👍 I prefer your solution to buying another laptop 👏
This is alchemy! I think I feel like those people I try to explain about the size of the Universe feel...
You are amazing, Mr. Patel!
He has at least one people making the tedious disassembly / assembly task. He only makes the "brain surgery". As it must be. Very Pro player.
I love how he tests the board with the laptop like "Plug it in, cross my fingers it works- Okay it works, *unplug~ - Alright, get it back out of here."
Excelente!! Todo me ha gustado muy grande con muchas cosas destaco el saloncito de la parte de vivienda que muebles!! Este tipo de abandonos es como 3 por tantas cosas que admirar.Bravo!!!
Nunca vi nada igual a isso, vc é foda meu irmão
Computer hardware porn right here, why is it so satisfying watching videos like this.
Mano. Muito obrigado! Meu carregador original deu esse problema, eu não sabia comprei outro, depois de um tempo o mesmo problema nesse novo carregador. Resultado... Foi exatamente esse problema e resolvi seguindo suas dicas.
Nice work man! It's a hard job and need a lot of time and skills to make it working again! I want to have a job like this, because i'm interested in this things.
claudiu97ful once you get yourself into it! it isn't really hard!
Yes, just need to learn the first steps.
Hello, first thank you very much for uploading this video.clearing the ball on the motherboard chipset and soldering temperature many degrees.I have been applying high heat up the solder that saw göün of copper while the cleaning process
Me surgieron varias preguntas: Qué temperatura le diste para que peguen las bolas, cuánto tiempo? Cómo centraste el BGA en la PCB? Cuánto tiempo le diste de calentamiento al flujo de aire caliente y a qué temperatura? Y por último, precalentaste o aplicaste calor por abajo primero al BGA para pegar las bolas y segundo a la PCB para pegar el BGA? No sé si me expliqué, y si lo hice, puedes responder mis preguntas?
I appreciate your efforts. Excellent work.
Greetings from Macedonia!
Amazing!! God job man!
Cheers from Brazil!
thanks bro
DĚKUJI za Čechy, Ed
wow! Most impressive. Never seen such skill
That is seriously amazing. Well done!
Thanks for your comment
Thank for your sharing. I learn and understand a lot of steps you apply to this motherboard. May I know what is the purpose of yellow tape in 10:58. You cut that tape for a short strip and apply on to the chip. Is it the conductor tape or double side glue tape or for grounding purpose ? Thank
When i put aluminium foil on chip upper side , chip upper side capacitor may be short so i am using tapa as a insulator
Very very Good video my bos
Great job. What was the reballing temperature?
simply awesome! congratulations for the great work
Thanks for your comment
Even if you claim to use wrist straps and mats for ESD safety, you should never ever be near or come in contact with any object that generates ESD while touching the circuitry. Being grounded doesn't mean you are immune to generating a charge from other objects in the area.
Thanks for your comment , ESD wrist is a cheap solution for esd protection , but we are covered all work bench with ESD MAT ( search on Google ESD mat) so doesn't Wearing Every time esd wrist , many people don't know about ESD MAT its quite costly , ESD MAT always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mat on the table , also foot mat not recorded in video ( when i make this video i never expect ESD realted questions in comment box otherwise i record it first for people who asking for ESD protection )
@@HarshadPatel I know for sure it says in official ESD precaution guides that it doesn't matter if you have an "ESD MAT" (It's not spelled mate, learn proper English please) You still need to keep non-static safe stuff away from your work area. But go ahead, do what you wanna do...
Thanks for correcting my English ..
@@HarshadPatel Sorry if I sounded rude. Cool video though. :)
dear friend , appreciate your comment in positive way , Thanks again for your reply
So what was the final for all that what was achieved other than the the outstanding work. You sir are doing your superman thing in the matrix. I'm not aware of the parameters was it trash did bench mark double was t a like new refresh? Thanks and sorry for being the guy who ask what is happing every 10 min instead of watching the movie
Mis respetos, gran trabajo , gran profesionalidad
Класс!!!Мне мультиметр понравился скотчем к стене ...
Great work !!! Only the soldering mashine is too expensive, and big for my use. Good luck and best regards from Prague.
Letecke Vysetrovani lze to provést i s běžnou malou horko vzdušnou stanicí
seria todavia mas seguro una revision por rayos x para revisar la soldadura por debajo y encima de la tablilla
parabéns guerreiro excelente trabalho um dia eu aprendo a fazer um serviço assim pois estou no começo da profissão e tenho muito o que ver e aprender ainda parabéns sou de fortaleza ceara
If you card driver experiencing fps drops and can't get latest updates then watch this wizard.
It looked easy for the first two seconds, then...
cool job! comments, sound, used tools and procedures would be a great addition. Nice to learn about that mold. What's the spray you use and the stuff you put on with the brush for example? temperature profile?
thanks for your comment .. spray is a NC thinner for clean flux easily , temp is a profile ,, not more than 240C
awesome..is that vga or processor chpset ? can you reball processor ?
i used to do this in my work place before, it so deppresing for the first time, sometimes the ball didnt stick to the chip when i removed the plate and must do it manually. but its worth it when its done
Thanks for sharing,
You make it look very easy..., which ir station are you using ? and can you recommend it ?
Make sure you use gloves if dealing with leaded solder! 😁
gloves use for ESD protection and also ESD wrist is a cheap solution for esd protection , but we are covered all work bench ESD MATE ( search on Google ESD mate) so doesn't Wearing Everytime esd wrist , many people don't know about ESD MATE its quite costly , ESD MATE always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mate on the table , also foot mate not recorded in video ( when i make this video i never expect ESD realted questions otherwise i record it first for people who asking for ESD protection )
Sir that's a real talent well done
very nice video,i tried once to bake motherboard in oven on 200c but no luck :),but i got one of my desktop gpu working with that method
What's the purpose of the small strip of kapton tape? Is it to hold the chip in place or to show the processor has been worked on? From my experience fixing and parting out friends' old broken laptops, it's very tedious work! Can't imagine how you must feel after doing this all day, id have tunnel vision after!
Give this man a space station
So, that's where all the good amtech flux went and why we have a shortage...godamit.
People complain about AS wrist-band,,,, I can and do wear them on my ankle often, perhaps he does as well. Also if you are barefoot on the ground, or grounded metal you will not build up Static charge. :-P
thanks for comment
also floor and table are treated with antistatic mate , blue mate is antistatic mate , but people did not see it in video
ESD wrist is a cheap solution for esd protection , but we are covered all work bench with ESD MATE ( search on Google ESD mate) so doesn't Wearing Everytime esd wrist , many people don't know about ESD MATE its quite costly , ESD MATE always grounded you so there is never effect antistatic charge , if you watch video again you can see blue mate on the table , also foot mate not recorded in video ( when i make this video i never expect ESD realted questions otherwise i record it first for people who asking for ESD protection )
Venha pra Natal RN ta faltando um profissional assim honesto
Great video! Will you please tell me what type of stensil you use and what size of saldering balls?
we use it direct heat stencils .... balls use depends on bga ic requirement like a 0.3 , 0.4 , 0.45 , 0.5 , 0.6 mm
Those are some skills!!
Thanks for comment 😊
Holy cow...that's a lot of work.
Ottimo lavoro, complimenti. Mi piacerebbe avere questa manualità...
I wish I knew how to do this stuff because I threw out an IBM ThinkPad that was pretty nice due to randomly getting no video or USB malfunctioning. I couldn't find definitive information on the problem but the info I did find seemed to point to a faulty southbridge chip.
Pretty sure it would be cheaper to just buy a new ThinkPad instead...
@@tommyrobz Well obviously considering how pricey reflow stations are and that I don't already own one.
Wonderful work. Well done TKQ
Mr .
Lin ke Good work as always
Thanks.
You are a life saver
雖然我以前也是常常這樣幹!
但是加熱完就直接下液體冷卻有很高的機率晶圓會損壞!
No words! You're awesome
Great job. I'd like to know if it's easy to buy the stencil. I mean, is the stencil a standard one? Does each gpu model has its own stencil type? Thanks.
very satisfying to watch
I value the content on content . Much thanks!
A perfect reballing :) Greeting from Pakistan.
+Faiyaz Khan Thanks🙏🏽
a lot of work, if the pcb is not so exspensive I prefer to buy a new one.
Great and perfect work
Very interesting, I very much lack the skill to do this but I understand the principle behind it.
But what was that greenish transparent tape you where putting on the heatsink mounts?
Its a kaptop tape..
+test Kapton tape.
You are Genius.....👍👍👍
What a pro! Ma cha Allah
Ya, I did that same thing just before I dropped the kids off at school this morning with all the solder and that thingy there. What did you do?
lol 😂 - me too, but I made an egg bacon toasted sandwich at the same time.....
Good job Harshad, how it's called that charger-device that you use to power-on the motherboard?
Thanks , It's a 30v 5Amp DC power Supply
Pure ART!
Jajaja realmente es un video muy divertido, felicidades.
Very very good. Can i know the temperature setting of the BGA machine ??? And what is merk and type off the tin balls ??? Thank u before.
Thanks ,
it's a leaded ball SnPb37
Thank you, excellent demo.
For real guys??? Nowhere is there an antistatic strapping in site, these are methods used is Asia I can Imagine, but I for one wouldn't want my CPU to be handled this way !!
HP Business Notebook PCs - System Fan (90b) error message on startup
This document pertains to HP and Compaq notebook PCs.
When starting the computer, the following error appears on the screen:
The system has detected that a cooling fan is not operating correctly.
Continued operation is not recommended and may cause unpredictable behavior that could result in random shutdown, data loss or possible system damage. The system will shut down in 15 seconds. To prevent shutdown and continue operation, press the Enter key now.
System Fan (90b)
In addition to this error, the system fan may spin faster and become louder.
that such a man, I have a question, which is what you cut and you hit the IC's and serving reballing, corrects errors, greetings from Mexico
Hector Manuel a que te refieres?
what material did you use in this tutorial? also is that a dedicated laptop gpu? I didn't know it's possible to remove them from the motherboard. waiting for your reply thanks in advance
Thank you.
Really good video. Thanks Bro All the best
How do you know when a chip needs recalling though? And are chips like this tied to a motherboard or can they be replaced?? For example: can the APU of the Xbox One be replaced or is it tied down t9 the board itself? Thanks! 😄
PS3のReballingに何度となく挑戦したが、こんな上手くHot Air Flowができません。つか、途中で吹き付けてる液体ってなんなん?Reballing後に浸してる透明の液体もわからん。つか、雑にやってるように見えるが、実はかなり高度な技術に驚きます。
Thank you for the video!
Very informative!
Did you use the ultrasonic vibration cleaner to take the stencil of the chip or to clean it?
Also do you think an IR station is better or a hot air station is better?
Thank you!
as per my point of view hot air is better than IR . ultrasonic cleaner use for remove stencils and for clean ic
Hello, let me know how much hot gun temperature we can apply on stencil after placing balls on chip,
and how much temperature we can set on bga machine for sticking balls of stencil to chip.
thanks.
Vivendo e aprendendo , Obrigado,,,