thanks for the video I have the aspen plus bought 2023 could you assist me with a question when i put code 8018 and set the wheel size to 26 mine has 8 settings where the number bottom left goes from 175 - 195 - 200 - 210 - 215 - 230 - 240 - and 400 like on your display. Can you tell me what that means TIA
Great video.i can get into the settings but mine won't let me change the peddle assist speed or tge throttle.im in UK and have no throttle on mine as its illegal here,anyone have this problem with peddle assist please?.tia.
I have a Magnum 48 Volt High Step and my display comes in Miles per hour.......not kilometres per hour .......can i change it to kilometres per hour as well as change the ODO to kilometres too ???????
If you run narrower high pressure tires, yes you will have less rolling resistance and it will roll faster. However keep in mind this is for tarmac or hard surfaces.
@@epiccycles9 The scam I was trying to pull was telling the bike that it is a 20 inch wheel instead of a 29 inch wheel so that the bike would get calculate a lower speed. I tried it last night and the “top speed” just went to 22 km/h instead of 32 km/h. The actual top speed never changed. So this just tells me the speed limit in the bike is programmed as a function of number of revolutions in the motor
@@HermanHiebert actually you are wrong. As I did with my bike. Yes the on bike speedometer read wrong. Its actuall reading in MPH anyways the bike goes faster. i used GPS speedometer to track the speed. Without the tire change 34km max. After tire change 40km max
wouldnt making it with a bigger tire size rick the bike into making more faster? It takes a longer time for a large tire to rotate opposed to a smaller tire. @@DeeBatch
You will need to get into the advanced settings and change the throttle speed settings. You must have accdintally got in and moved it to 6. Watch the video again, it expalins how to do this and change the throttle speed.
Pour les versions françaises, il est impossible de le debrider car l'accès aux menus cachés est limité. Ne l'achetez pas sur le marché français sinon limité à 25km/h. J'ai sollicité Léon Cycles le distributeur officiel de NCM en France et ils ne commercialisent pas le C7 BBT-10 off road qui permet la manipulation de cette vidéo. Je suis très déçu.
HI Faisal, all you have to do is hold down the + button for about 8 seconds, the MPH will blink let go and then tap + again to switch between MPH and KM
Hi David, just hold the + button for 10 seconds. After about 10 seconds the MPH will start blinking. You can then toggle between MPH and KM with the + button and once set to KM hold the set button.
Very good easy to follow guide to the C7 Display Functions , thanks Barry, One big question though, I have a newish Magnum Peak with 85 Kms on the odo, and would like to let the bike go as fast as possible when I need the speed, so would it do any long or short term damage to leave the P set on Zero (Max Power) ? there's no issue with going 50Kms or in NZ. Thanks
Hi Robert, you can leave the P setting on the Zero always without any compromise on the motor. I myself, always do as well. There is no issue, it just maximizes the motors capabilities
@@barrynisan5686 Hi Barry, That's good to know thanks, nice to know I can tap into that power when I need it. The reason I ask is that is I set it on max but after approx. 12k ms the bike cuts out still showing full battery and showing 50.0V, recharge, turn back on and it will go for another 11 or 12kms and stop again, (it happened on Normal too) bit scary in traffic! if it's not me then I guess it's back to the shop! it's a great bike otherwise ! Cheers.
@@akinsons Yes that should not be happening. I believe It could be a problem related to either the battery, controller, or motor. I would have it brought in to the shop to get looked at.
@@Mcejlocke Yep I agree, thanks, I've been on to the shop that supplied the bike to first owner new last year and booked it for them to assess the problem, I'm hoping that with only 85Kms on the bike (50kms when problem started) it can done under warranty (all those parts mentioned are expensive lol!!!! ).
Hallo I have Et. Cycle F720 from Germany.it has a Das Kit c7. but with my Das kit C7 I cannot change the settings (especially I cannot change the speed settings for my throttle) . if I buy Das kit c6BBT or Das kit c7BBT will it work with my ebike. Please let me know. Ahmed
what is your throttle limit?, it sounds like the company wants to snooker any would be tweakers, Kogan's later batch of Fortis bikes have no throttle wire with controller to snooker any throttle jockeys
Thanks! Best description of the C7 display so far.
thanks for the video I have the aspen plus bought 2023 could you assist me with a question when i put code 8018 and set the wheel size to 26 mine has 8 settings where the number bottom left goes from 175 - 195 - 200 - 210 - 215 - 230 - 240 - and 400 like on your display. Can you tell me what that means TIA
did you find out?
Also trying to figure this out
trying to find out myself too
Width of the tyre.... 400= fat wheel
Yup I also found out doing 26 20 you get 40kmh
@@rogiroe745
Do you know what the 400 mean for the 26 inches wheel i see 400 or 250?
400 = Fat Wheel
Great video.i can get into the settings but mine won't let me change the peddle assist speed or tge throttle.im in UK and have no throttle on mine as its illegal here,anyone have this problem with peddle assist please?.tia.
I have a Magnum 48 Volt High Step and my display comes in Miles per hour.......not kilometres per hour .......can i change it to kilometres per hour as well as change the ODO to kilometres too ???????
Press on the plus for 10 seconds
NCM Plus 1500.00 what a great bike!
Ok so mine only allows 20 on throttle how do i make it go faster?
Waiting on this answer too
If you set your bike tire size smaller will that make you bike go faster??
If you run narrower high pressure tires, yes you will have less rolling resistance and it will roll faster. However keep in mind this is for tarmac or hard surfaces.
@@epiccycles9 The scam I was trying to pull was telling the bike that it is a 20 inch wheel instead of a 29 inch wheel so that the bike would get calculate a lower speed.
I tried it last night and the “top speed” just went to 22 km/h instead of 32 km/h. The actual top speed never changed.
So this just tells me the speed limit in the bike is programmed as a function of number of revolutions in the motor
@@HermanHiebert actually you are wrong. As I did with my bike. Yes the on bike speedometer read wrong. Its actuall reading in MPH anyways the bike goes faster. i used GPS speedometer to track the speed. Without the tire change 34km max. After tire change 40km max
wouldnt making it with a bigger tire size rick the bike into making more faster? It takes a longer time for a large tire to rotate opposed to a smaller tire. @@DeeBatch
NO Smaller as it think its not spinning fast enough and provides more power@@NinjaWarriorDude416
Does anyone know what 30u5 means on this display? When I turn on the bike this is the first set of numbers that comes up.
Is there not a way to change from mph to km
find out if u can?
Hi, do you have the code for UBK UB1 display (from Urbanbiker Dakota for example) ?
Hi, I have a Ncm aspen fat bike I live in Canada and with my L7 Daskit I can't have acces to change to 45km/h. How can I change this ?
One way to make it go faster is tire change in display. Put it to 20
Throttle le el on mine will not go past 6 anymore. It did before now it seems to be stuck on 6 when I want it to be back at 32. How can I remedy this?
You will need to get into the advanced settings and change the throttle speed settings. You must have accdintally got in and moved it to 6. Watch the video again, it expalins how to do this and change the throttle speed.
Pour les versions françaises, il est impossible de le debrider car l'accès aux menus cachés est limité. Ne l'achetez pas sur le marché français sinon limité à 25km/h. J'ai sollicité Léon Cycles le distributeur officiel de NCM en France et ils ne commercialisent pas le C7 BBT-10 off road qui permet la manipulation de cette vidéo. Je suis très déçu.
Is it possible to change the odometer
Where can you see the voltage when to see where your battery is actually at
Hello, The BMS voltage can be found in the bottom right corner of the display.
what bike was this in the video? thanks for the help
Can you have more than 6 PAS levels? Eg 9
i live in canada and i will not let me set my speed limit
How much for this kit with thumb throttle?
one question, my et cycle c7 display do not show me settings for trotle on display? maybe the code incorrect? please help me my gas is on 6km/h
Hi Sasa. The codes are set by the manufacturer. If these codes do not work, we would suggest contacting the manufacturer of your bike.
@@epiccycles9 thanks
Puedes hacerlo en español o traducirlo tengo una ncm plus y nose como deslimitar la bici ni ponerle el acelerador
Very useful. Thank you.
Thank you very much🙏🏼
Thank you so much mate!!
How do I change to know from mph?!
HI Faisal, all you have to do is hold down the + button for about 8 seconds, the MPH will blink let go and then tap + again to switch between MPH and KM
45 volts is not dead. thats about 40% left.
How do I change miles to kilometres on my Magnum Metro +
Hi David, just hold the + button for 10 seconds. After about 10 seconds the MPH will start blinking. You can then toggle between MPH and KM with the + button and once set to KM hold the set button.
Hey Barry, too simple. Thank you
Does this work on the Das Kit C6 also?
@@davidcormier6954 Yes, works the same way on the C6 Display
I see only power mode on my C7. There is no normal or ECO mode
cause they wiped our Canadian regulations.
I just cant save the settings goes back to original
How do you enter walk assist mode
Hi David, to enter walk mode simply hold - button for 6 seconds. It's best used for uphill walking as it's a little bit fast for flat roads
Just hold down the - button for 6 seconds
Very good easy to follow guide to the C7 Display Functions , thanks Barry, One big question though, I have a newish Magnum Peak with 85 Kms on the odo, and would like to let the bike go as fast as possible when I need the speed, so would it do any long or short term damage to leave the P set on Zero (Max Power) ? there's no issue with going 50Kms or in NZ. Thanks
Hi Robert, you can leave the P setting on the Zero always without any compromise on the motor. I myself, always do as well. There is no issue, it just maximizes the motors capabilities
@@barrynisan5686 Hi Barry, That's good to know thanks, nice to know I can tap into that power when I need it. The reason I ask is that is I set it on max but after approx. 12k ms the bike cuts out still showing full battery and showing 50.0V, recharge, turn back on and it will go for another 11 or 12kms and stop again, (it happened on Normal too) bit scary in traffic! if it's not me then I guess it's back to the shop! it's a great bike otherwise ! Cheers.
@@akinsons Yes that should not be happening. I believe It could be a problem related to either the battery, controller, or motor. I would have it brought in to the shop to get looked at.
@@Mcejlocke Yep I agree, thanks, I've been on to the shop that supplied the bike to first owner new last year and booked it for them to assess the problem, I'm hoping that with only 85Kms on the bike (50kms when problem started) it can done under warranty (all those parts mentioned are expensive lol!!!! ).
does it have a calorie calculator , to see how much you burned off
No!
How do I get past the 25kmh speed set limit
you have to order the das kit off road display
@@victoria653 this where can you order or what is the model?
Hallo I have Et. Cycle F720 from Germany.it has a Das Kit c7. but with my Das kit C7 I cannot change the settings (especially I cannot change the speed settings for my throttle) . if I buy Das kit c6BBT or Das kit c7BBT will it work with my ebike. Please let me know.
Ahmed
what is your throttle limit?, it sounds like the company wants to snooker any would be tweakers, Kogan's later batch of Fortis bikes have no throttle wire with controller to snooker any throttle jockeys
@@manFromPeterborough 45km