That’s actually why the ump was made, cheaper, easier, faster to produce and in a caliber with more “stopping power” but special forces said they like the mp5 better anyways lol.
I got lucky and didn't need the low nozzle.... right out of the box it's shooting 340. The accuracy is atrocious though, I changed the barrel to a Prometheus barrel and 70° autobot bucking. I still have the same issue, bbs either fly up, swerve to the right or droop. Any help would be appreciated!
i got the same problems! I changed 150mm inner barrel for my mp5k, and 60 bucking(both MF), it fly straight 20m and fly to the sky no matter with hop or not after 20m Have you solved the problems bro?😢
@@Thunderstorms_Hk Fortunately I finally found a solution! Definitely get an aftermarket barrel Maple leaf or Poseidon . Then get yourself a Maple leaf 50° autobot bucking and a UNICORN 50 Degree Rubber Hop Up Nub (Soft). Assemble it correctly and it'll shoot lasers til the 60ft/20m mark, after that it'll either drop or shoot high. I can't seem to find that sweet spot with this hopup unit.
My set-up is a 150mm maple leaf inner barrel and 60c 2023 Decepticons bucking. The effective range is around 20m top with 0.25 bbs. I wonder if it is the weight of bbs or not. Would test with 0.3 bbs next time(probably the inner barrel is too short). Btw, I found part #32 quite often breaks. I have been replaced twice within half a year (under 1500 rds). But it is still cheap and a fun airsoft gun after all🙃. @@zanderesp4295
@@zanderesp4295 My current set-up is 150mm maple leaf inner barrel and 60c 2023 Decepticons bucking. The effective range is around 20m top with 0.25 bbs. I wonder if it is the weight of bbs or not(it probably is a short inner barrel). Would test with 0.3 bbs next time. Btw, I found part #32 quite often breaks. I have been replaced twice within half a year (under 1500 rds). But it is still cheap and a fun airsoft gun after all🙃.
It's soo different for everyone from what I could tell so it's hard to generallise like that. But i think its safe to say that most likely parts to break are going to be replaceable.
Had this gun from june till now, have gone through: 2 trigger groups 4 nozzles 3 bolt carriers 2 hopup chambers 2 charging handle nubs(falls off in 100-110f heat) 1 buttstock Many many mag feed lips. Not very durable. Be prepped to buy two if you use it as your main gun.
@@tommie2928 gun isnt abused just shitty quality control lol. Run it on propane and lube + clean every other game Idk what abuse i could do to make the bolt carrier and trigger group break. The hopup chambers were my fault however cause i ate shit and broke it 😂
Don't be too hard on your past reviews. They convinced me to buy one and it's amazing. Thank you!
i loved the editing on this video, it was very nicely matched up with the audio. thanks for what you do!
I’ve used the real mp5 and own a real steel one. The handguards do not make the creek noise but they still wobble
Love the gun but man its so expensive. I ended up getting the VFC UMP 45 just because of price.
lol they got the history right in the airsoft communité. I think that's why the UMP was created, beause as good as the mp5, its too expensive.
That’s actually why the ump was made, cheaper, easier, faster to produce and in a caliber with more “stopping power” but special forces said they like the mp5 better anyways lol.
Here in the Philippines.
It cost 400$
I got lucky and didn't need the low nozzle.... right out of the box it's shooting 340.
The accuracy is atrocious though, I changed the barrel to a Prometheus barrel and 70° autobot bucking. I still have the same issue, bbs either fly up, swerve to the right or droop. Any help would be appreciated!
i got the same problems!
I changed 150mm inner barrel for my mp5k, and 60 bucking(both MF), it fly straight 20m and fly to the sky no matter with hop or not after 20m
Have you solved the problems bro?😢
@@Thunderstorms_Hk Fortunately I finally found a solution! Definitely get an aftermarket barrel Maple leaf or Poseidon . Then get yourself a Maple leaf 50° autobot bucking and a UNICORN 50 Degree Rubber Hop Up Nub (Soft).
Assemble it correctly and it'll shoot lasers til the 60ft/20m mark, after that it'll either drop or shoot high. I can't seem to find that sweet spot with this hopup unit.
My set-up is a 150mm maple leaf inner barrel and 60c 2023 Decepticons bucking. The effective range is around 20m top with 0.25 bbs. I wonder if it is the weight of bbs or not. Would test with 0.3 bbs next time(probably the inner barrel is too short). Btw, I found part #32 quite often breaks. I have been replaced twice within half a year (under 1500 rds). But it is still cheap and a fun airsoft gun after all🙃. @@zanderesp4295
@@zanderesp4295 My current set-up is 150mm maple leaf inner barrel and 60c 2023 Decepticons bucking. The effective range is around 20m top with 0.25 bbs. I wonder if it is the weight of bbs or not(it probably is a short inner barrel). Would test with 0.3 bbs next time. Btw, I found part #32 quite often breaks. I have been replaced twice within half a year (under 1500 rds). But it is still cheap and a fun airsoft gun after all🙃.
Great video man. Thanks a lot. :)
Is that charging handle is steel made?
Yes.....
Hi
do you know most popular broke part?
ex ) hammer?
It's soo different for everyone from what I could tell so it's hard to generallise like that. But i think its safe to say that most likely parts to break are going to be replaceable.
Had this gun from june till now, have gone through:
2 trigger groups
4 nozzles
3 bolt carriers
2 hopup chambers
2 charging handle nubs(falls off in 100-110f heat)
1 buttstock
Many many mag feed lips.
Not very durable. Be prepped to buy two if you use it as your main gun.
@@megumuu- How much do you abuse and use your gun?
ImSoBBoy: Yes
@@tommie2928 gun isnt abused just shitty quality control lol. Run it on propane and lube + clean every other game
Idk what abuse i could do to make the bolt carrier and trigger group break. The hopup chambers were my fault however cause i ate shit and broke it 😂
It’s an a5