THIS IS NOT GOOD...$200 TRASHED Warrior 350!!!(Part 8)
HTML-код
- Опубликовано: 20 окт 2024
- I end up fixing both brakes, the handlebars, and grips on my1987 Yamaha Warrior 350. I then take it for a test drive in the snow. #Restore, #Abandoned, #Yamaha,
Check out PSN Used ATV and UTV salvage yard. They offer free shipping and 30 day warranty. www.powersport...
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • How To Get Paid On You...
►WEBSITE: laptwo.com/
►FORUM: 2vintagerider.c...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
Make sure to checkout my instagram to see behind the scenes: 2_vintage_
Check out Laptwo.com and sign up for the newsleter. Launching in March: laptwo.com/
My Second Channel: ruclips.net/video/TPEgjamDX7s/видео.html
Thanks to everyone who watches and supports the channel!
That ATV starting to look pretty good been watching you for quite some time
Hey there was a school shooting in your town is you town okay man?
Might be the valves or cam making That noise, or camhain
Get a kawasaki mojave 250
I know it is kind of off topic but do anyone know a good site to stream new movies online ?
Should take that top end apart and at least clean everything out...
Micah Bell I can’t believe it’s even running by the way it sounds
@@jacknothnagel5011 same thing ive been sayin, ive built many 4 strokes an to hear the squeelin an rockin of the piston is not good. also at the end of the video i see its pissin oil out the bottom meaning the blowby from the damaged rings are getting worse. :/
Spray some WD40 in the cylinder 😂👌👌👌
@@chevyhp cleaning.. lmao fuckin send it!
@@killaz123456789100 lol
what a tough motor yamaha! after seizing up and ran with a oil filter full of shavings, and not so much as a compression test, leak down test or valve adjustment or even a basic carb tune .....its still going. lean and mean with the crank seal blown out lol but my money is on its blown up next video, if he checked the oil he would be scared....it stopped smoking lol he paints wheels like he cleans carbs and brake calipers lol
cant stop watching, its like a cheap tim the tool man taylor that cuts every corner imaginable haha
First thing I noticed is that it stopped smoking - its likely dry, best situation is a stuck ring freed up.
I’m just waiting for it to blown, unfortunately
I cringed so hard when you painted the rims, you didnt even sand them enough then you used wd40 as masking :P
Edit: Why it doesnt shift is because you changed the shift lever, and you should really, REALLY find out what that whistling sound is before it kills your engine
Arctix its a 200 dollar 4 wheeler, what do u expect
C'mon guys he said he will restore it but that's not how you restore things.
Arctix did he say he was restoring rn? No hes just making look a little better
The whistle are probably piston rings
The whistle is the sound of the pullstart flywheel thing were the pull start cover goes, they make that sound without the cover
Did anyone else notice that installed the shift linkage wrong so up is shifting down and down is shifting up
I would put more effort into the mechanical aspect of this build than the cosmetics. The top-end is obviously very sick and the carb needs serious attention. The rattle can spray jobs are painful to watch and are going to be very temporary fixes. I realize it's a chepo build, but you could get much better results with a bit more attention to detail.
he has no idea what he's doing mate. lol. The only value in his content is the cringe. Funny to watch how bad it is
To get the old grips off you should have just cut them with a razor knife
You would trust him with a knife?!
Dude used wite cutters🤣🤣
I know lol he was struggling
This man loves his heat gun sense he recommended it he has used it in every video
NvrBrkAnAngel and his rust-olium spray paint
I use a Razor Knife Myself...To cut my Grips off the Handle Bar..
buddy's toolbox: 30 cans of WD40 and a heat gun.
I love this channel. Not even kidding or being a smart ass. I knew the second I saw those handle bars that they were getting painted. Not replaced new, not swapped out or anything like that. Straight up rattle canned. I know some of you all rip this dude up for stuff like that but the more and more I watch , I realize he is not trying to flip these things as complete rebuilds but just make them better than he got them. If you have owned a motorcycle two things have happened, 1) , you have crashed it at some point 2) you have had to work on it at some point. I'd say if he was going to keep it , those bars would be replaced or powder coated . Keep up the good work.
Nope, he doesn’t restore anything , he is uneducated about quads and bikes and does quick fixes on them for profit, I feel so bad for his uneducated customers expecting something half decent for there money that don’t really know
How to inspect a bike when purchasing....and trusts the seller that the machine is okay
@@paulbrinston3336 I sell them for a fair price. I do not say they are "restored" or claim to have done anything to them besides clean and inspection. The buyers who buy my stuff usually just want a fun toy to beat on, not something they store in their living room...
@@paulbrinston3336 haha get told. If you dont like the way he handles or sells his machines then dont watch. That simple
I watch this to pass it on to the apprentices at my work on what not to do, I just can’t belive it keeps going lol
I’m sorry you have sold a lot of junk and made money doing so. To me it’s not admirable. If you done a full restore you could ask more money for it and be proud of somthing you sell...pretty gnarly concept hey
First...great job putting in the work to take a non running locked up warrior and making her go. Suspect most of the negative commenters would not have put the work in and may not even know how to do what you did up to this point.
Second...I do agree with other commenters that on this one...since costs are low and potential return on investment may be better with a solid engine tear down and rebuild...use this project to dig a bit deeper and show us all how to perform a engine tear down and rebuild.
Believe whether you keep or sell...an engine rebuild on that old warrior will be time well spent.
Appreciate the content...nice job putting the work in.
Never seen him do more than take an engine side cover off or a top end off on a two stroke to send it to get re plated so i doubt he'll rebuild it
I have not seen you adjust the carburetor one time yet . 👍been wanting to say that 3rd video back.
He just spray paints.....no time for engine adjustments....lol
Use less air pressure when riding in the snow machine to work alright for me when I was ripping around in the deep snow
I've been running my tires with no air lol. Gets me through pretty good.
Its workin out for sure!! Get a crank seal for it thats why its leakin oil and reving up
Hey Joe looks good man and I like seeing all the kids in your comment section saying you should change this change that make this look better. you did it right man you got it running first you fix all the mechanical problems before you make it look good. that's how you do it I'd rather my machine run then look good and not run... and the shifter problem is definitely the adjustment on the linkage and that rattling noise your hearing is from The Recoil cover not being on most likely... but for a $200 quad dude it looks 100% better then when you got it people hating on you for the way you fix stuff they have to remember it's yours it's your quad you can do whatever you want to it lol if you want to replace the top end that's the only thing you should do if you want to being u fixed everything else...
The bars ruin the look of the whole quad everyone and there brother can tell there off a little girls bicycle
Jack Nothnagel He literally could’ve bought a new pair of fly racing bars online for $25🤦♂️😂😂
Hilarious!
Fr
Whistling sound is where the starter recoil is off. When you put it back on it will not whistle anymore
That was the most comical way of removing grips i have ever seen lol..... keep it up
Lol.....this guy kills me.....he used wire cutters 😂😂
32:44 "I don't know what the heck is up with this thing." It's because you don't know what you're doing!! I've said it before, you seem like such a nice guy I hate beating you up, but dude c'mon...Take a friking Small Engine Repair Class please!!! A couple of them. You'd have so much more fun & spend so much less time working on these clapped ass bikes. You'd be able to diagnose them "properly", then fix them "appropriately", then & only then will you find out what "insane" power is all about. Wish you the best of luck.
Turn the damn idle down
@Mike Lyons but you're still watching the videos. Don't be ignorant. They're his machines if you don't like the way he works on stuff you don't have to watch the videos
@Mike Lyons drinking outta the toilet bowl 😂😂😂
@Mike Lyons 😂
Those handlebars need a new set of streamers in the end,then the warrior build will be complete!!👌👌minty!!
Haha
Use compressed air to install grips. Put nozzle on end of grip and blow through small hole. It expands the grips and they go right on.
Idle still way to high and seem like front brakes are on i ride min in way more snow with less spinning also put old shifter with new linkage if ya can
Richard Jados the little screw on the bottom of the carb will adjust his idle lol easy fix
@@codykuiper9613 yes i know must not have a screwdriver that size lol
ARE YOU GONNA MESS WITH THE REVERSE?
Next time you are taking grips off, use a box cutter (that is if you aren't going to re-use them). BTW, nothing on a Japanese quad is 7/16. It's all metric. I am hoping you know that, but didn't want to go looking for the correct size. Though as boogered up as that quad is, they probably just cranked an SAE nut on there. Your linkage is not correct, that is why it won't shift properly.
Ok man, mask your wheels next time. That wd 40 trick is so sloppy. There's just no need.
You can tell someone has no real idea of what they're doing when they're wasting ridiculous amounts of WD40 on everything it was never designed for.
Try putting some Wd-40 on a scotch brite pad and scrub that rear axel that’s what I did with my 400ex and the rust came right off
You should get a 300ex or 400ex. They are awesome quads
A 300ex is really a 250ex bored out
A 250ex is a recon 250 with different plastics. The motor is different on the 250ex than the 300ex
250 ex trx is the goat four wheeler
To cleaning stuff up after sanding before painting, you can use ammonia. Doesn't cost sh*t . And to get off or put on grips, squirt some rubbin alcohol in them, it'll work even better. After it has vaporised they'll be solid. Btw i think she doesn't shift and makes that noise cause your clutch is worn
Those bars are super bent still, also i would just go ahead and make it a restoration project
He would spray paint a pile of $#@t if u let him....lol
@@jeffbaer9455 you right lmaoo
You guys need to stop being mean to him in the comments. He tries hard on these videos to make everyone happy. Maybe you should stop being jerks and making him feel bad
The compression release is made into the exhaust valve cover you need to check the spring on it 87-88 were the only years with pull start your shifter has to be for those years valves and carb need adjusted the knob on the bottom of the carb adjusts the idle
Tip for grips- use hair spray or spray paint to keep them locked on so they don’t twist.. or grip glue. Make sure to top oil off frequently if going to ride with engine needing work like that! Nice to see a piece of junk turn into a running machine, thought for sure it was never going to run without a rebuild.
That shifter is ftom a newer warrior which doesnt have pull start
Just looked at my 02, it doesn't look like that either.
Just add new gaskets and rings or something, freshen her up a tiny bit. Unless it’ll end up costing too much money, sell it and have someone else rebuild the top end if you sell it for $600
If you take the top end off make sure you check where the cam bearings seat these were bad about chewing up the bearing seat but 350 wolverine head and 350 raptor head will interchange as they're the same
That shifter is for 89 or newer try reading the comments I told you 87-88 shifter only unless you eliminate pull start
Warriors have never been pull start
@@nolanhauge 87 & 88 had a recoil or pull start as a back up also the only 2 years for the manual compression release 89 and up do not have the pull start you can also remove the pull start assembly and swap in an 89 or newer side cover for a cleaner look one last note do some research before talking about things with today's technology it's easy
Loving the videos nice little project hope you do another after this one keep up the good content
Grass and yard as bad off as the warrior 😂
Joe. You did a Great Job with what you had to work with..Quad looks awesome for $200. But I think that Motor and Trans is Shot.. I think you need Engine Rebuild..
Nice video, reason it wont go into Neutral anymore is because the new shifter linkage had to be shortened up to fit and its out of adjustment now.
30:01 “that’s not good”😂😂
Also that rattling is perfectly normal for an old warrior, my 87 does the exact same thing and it was just rebuilt, it did it before too
Man those handle bars are like polishing a turd. They still a turd come on bro moose steel universal bars are 20$ an they got them everywhere your better than that this is my #1 you tube channel
That quad has a reverse, should be on the right side under the tank, when your in neutral it pulls up and backwards, also you put the linkage back on wrong, that’s why your shifting is messed up, when you clicked it down you went up a gear, you basically made it GP shift like on high-end street bikes
What is that high pitch squeal like metal rattling
Called the top end Is about to shit the bed
could be anything. starter stuck on because 1 way bearing is stuck. top end tapping piston lol. if not fixed it will be a nightmare when she blows
He better fix the recoil if it's the starter making that noise lol.It could be his brain making all the noise thinking omfg I thought I'd be do e this by episode 8 Haha but he is doing a good job
One last thing you can use the linkage from the new shifter on the old one that with some adjustments should solve shifting problems
Love from England love your videos
If I had to guess I say it's not going into neutral because of you cobbling the WRONG shifter on it. Also the tubing on those handlebars is pinched at the bends. If anyone ever comes down hard on them, they will fold at that pinch point and severely injure whoever is riding it.
Kinda cold to be painting ? Looks like it turned out good 👍
Why did you put tape on the handle bar for the grips?
You fot motorcycle grips? 22mm and 24mm or something?
I wish it would snow down here in Georgia so I could sling around my raptor.
Kenneth Pickett same Georgia sucks for snow and ice
@@lilcman1475 big facts
Me to
@Weigh Of Balance That's a good way to make the best of that situation!
Same
When will you take the snowmobile out
Can we please refer to this quad as project oof from now on?
Love your videos. Sounds like the preachy trolls are enjoying it too. It’s fun for some people, I guess.
Dude you have absolutely no clue what you're doing but i watch for the cringe and entertainment so you still win lmao.
Use a wire wheel on a drill. It will hog the paint and rust off quicker and more thorough.
Just adjust the linkage that connects to the engine. The shift lever should be under the pull cord case not bent to the side like that.
Awesome upload again joe✌✌✌✌
I just started watching you but i love your videos keep it up there sick
I like the 350 warriors there pretty nice & good video
The electric start is not working.. It should not sound like that when you go to to start it..
Jody Hakamaki starts up don’t it
@@dirtbike.drayke Yes it does that's not the point... It does not have a recoil so it is going to leave him stranded.. Putting a new starter in it will eliminate that happening..
Nice videos turn the idle down and if it’s not that it’s an air leak, but fix it before you keep starting it and not letting it warm up properly because of the idle it will soon ruin it
If it don't go into nutrule then pick up the back end and wiggle the shifter at the same time u rock the wheels back and forth
Is that pull start a factory thing? Mine doesn’t have pull start
This dude is sanding down bent handlebars and painting them instead of buying a 20$ brand new set
I basically got one for free a 98 warrior Yamaha and the first thing i did was clean the carburetor it had like a frozen gel inside out and the float needle was frozen in it's slot i clean it took the grown needle out the hole put anther one from another carb but i Broke the tower for the float pin what the float goes connected too i gorilla crazy glued it just so i can put the cover on knowing the had will eventually eat it away but it was flooding the carb I've been trying to get spark but will only get some with the spark plug boot off i checked out with my volt ohm tester and it only had half the resistance that was recommended by a video i ordered a new carb and cool pack and CDI any suggestions i obtained this warrior through some work we did for a landlord were their evicted tenant left it behind so it's mine and i just wanna get it running so i can ride my kids on it and teach them how to operate a quad
I thought this guy was really going somewhere when he started doing full bike rebuilds but after I watched this I realized he's just an average back yard mechanic. HE DIDN'T EVEN MASK OFF THE RIMS, AND WHAT ABOUT THE BACK SIDE?😅
captaincsp all he needs is index cards around the rim to paint the wheels
@@chaseberndtson1662 to late😅
Good god dude tear apart that motor and fix the damn thing. It’s not hard to rebuild these motors.
Lol....exactly.....set the spray can down already.....lol
Check out the intake boot for cracks
just hit those brakes with wd40. fixed
Put brake cleaner as a lubricant for youre grips next time because it will dry out withing like 10 mins unlike water takes a couple hours
Nice video man i like all of your video’s
😥 I live in Georgia and I want snow 😢
Oh and hear that listing noise. Ya that’s the engine getting ready to blow up. Btw
Basically he bought it, he can do whatever the hell he wants with it. Including not going the full distance on repairs. It's his bike, we as viewers have zero say in what he does w it. Lot of people get that part confused, like they have control issues.
good job on the warrior first view
never heard of using saopy water for the grips. you might want to try grip glue
You should so do a top end rebuild and make that into a fid for the channel
Tristan Cleaver he doesn’t know how
Get a 400ex next
That's badass I just got one of these
Do you know they make grip glue
Adjust the idle a little
Shawn Alexander probably has a vacuum leak somewhere
Can be tht to
Patch the soapy water man.🤣 use hairspray it grips better
That bad boy is toasted
We got a couple inches of snow here to and I was out drifting my four wheeler
What is that high pitch noise, the starter?
that is the one way bearing stuck on. its spinning the starter. its suppose to be free spinning in that stator case. over time the starter will wear out. plus its smoking and tapping bad. she eont last long. I've fixed plenty of big bear 350s and kodiaks. I knew soons he tried to spin over engine starter was binding up.
@@Jamesrideoutadventures yeah it's probably the starter. What should I do to fix it?
youd need to remove that cover off stator. do a test with the flywheel if the back gear doesnt spin freely. youd need to replace it. that's probably why the pullcord ended up breaking because of that issue
@@2vintage I repair atvs for a living. that one way bearing is the killer of all starters and recoil ones. it also has alot of bounding up so pulling it over is a nightmare. that's why ur drill struggled because if it. not spinning freely. what's your facebook name? I'll help ya out more bro
Its not a build if you paint stock parts lmao.
No offence man but back up when your painting.... And spray before you hit the object and after clean swipes you're making me nervous bro
Love ur videos hope the seat comes in this week
That looks likes fun I might have to get a quad. And cool to see it runs in the cold.
I'm glad to see how far the quad has come, but your really need to actually take apart the engine, the top end Is clapped. Plz listen!
I don't think that shifter is for a Warrior. Even the one on my 02 doesn't look like that.
There are a bunch of companies that make a shorter version that eliminates the linkages though.
The shift pattern is backwards up is all down down is all up most Chinese pit bikes come like that
Having problems with the bike in this video, and I noticed when I clicked the Like button it brought the number up to 666 lol
Might have to get the sled out Soon
Sick dude
This has been a long series! :o
I would have painted the handle bars the same as the rims to match up. Lol. Just an idea
Can I have advice on my rusty chrome kx100 pipe how to clean??
sand it
@@bkerney98 no it's chrome can't do that my cousin already did looks like trash
put WD 40
put WD 40 on then shrab it
Use acid
Why du you hit the box
6 and a half inches sounds familiar