Add Wheels to the Harbor Freight Manual Log Splitter by
HTML-код
- Опубликовано: 6 сен 2024
- Out of the box, the Harbor Freight Manual Log Splitter works as advertised, but has inadequate wheels. It's difficult to move around, especially in dirt, mud, and grass. I fixed this issues by adding a much larger set of wheels, also from Harbor Freight.
Drill Block by Milescraft Links
Amazon: amzn.to/2HJvxBe
Home Depot: go.magik.ly/ml/...
eBay: go.magik.ly/ml/...
Ace Hardware: go.magik.ly/ml/...
www.gettinjunkd...
Please comment, like, subscribe and share!
You can also fine me on Twitter & Instagram - @GettinJunkDone
Use this link to shop on Amazon, while supporting the channel!:
www.amazon.com...
Bugout Truck Build: • Bug Out Truck Build by...
Tool Reviews: • @GettinJunkDone Talks ...
#HarborFreight #LogSplitter
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
Hey Everyone, thanks for watching. Be sure to check out some of my other tool reviews using the playlist linked below.
ruclips.net/p/PLHRSPnh4bEkwTiDfESJ-QLP5OWo6wayYo
Good idea! Thanks!
Thanks! Great video!
Aye man. Good thinking. Lynch Pins instead of cotter pins make installation and replacement easier.
Good thinking!
I just did this thanks to your video. I used two 5/8 bolts that fit the tires, and drilled the original holes to fit the bolts. Wonderful hack. Thanks for the inspiration!
I'll add something later to the other end of the splitter to make it level, but for now resting it on an appropriate sized block of wood does the trick for use of the splitter.
I was on my way to buy one this afternoon , I'm gonna buy all the stuff neceto add this mod to it while I'm there too. 😊😊😊
I did this to a HF log splitter, but used long bolts which fit into the existing holes, and then added a spacer to make the diameter large enough to fit the wheels. No drilling needed. No modification of the log splitter. Much easier, and cheaper, but not as strong, but strong enough I think. Easy to go back to the small wheels if desired.
Add wheels using 1/2"X3" hex bolts and washers. Now able to move it easier cross the lawn without it tipping over.
I rented a cellulose blower yesterday that had those tiny wheels. What a pain. Nice job adding the lift kit to your log splitter!
Yeah, those tiny wheels needed to go!
Just put a set of 6" wheels on mine and what a difference! As another commenter mentioned, I had to cut out a small portion of a brace to get the axle to pass all the way through. It is on a bit of an angle when I stand it on end but it is still stable. Thanks for the great tutorial!
The Lumberjack 12 -ton has these wheels already, along with front legs, and is $20 more,
Gr8 job! Thanks for the share.
No problem, thanks for watching!
Thank you.
I bought one, did mine with a piece of all thread, nuts and washers and was thinking I was the only one to figure out a way to put decent wheels n tires on it. Was looking for something else and "BAM" you have a video fixing a major issue these have. My next mod is a handle system so when laid down it sits level with the new larger tires and a removable tongue so I can hook it to my rider mower or ATV. Hard to drag this around and use a cane to walk with.
I thought the same thing. With the oversized tires, It wouldn't sit level. But an oversized handle would double as an leveling system. Great hack all around!
I did the same thing with all thread, I also added a small piece of chain with quick links to the existing handle so I can hook to tow hitch on 4 wheeler. I love this splitter!
A removable tongue for pulling it behind a tractor. Brilliant!
Excellent! Thanks.
It's been working great ever since! But now I'm planning on buying a bigger one eventually.
In video it didn't say what size wheels were used.
I just did the same to my HF log splitter after watching your video, thanks for the great tip! On mine there was a brace between the wheels that blocked the axel so I had to notch it with an angle grinder.
Small lawn mower wheels will replace the existing wheels with no cutting or changes to existing holes in the splitter. Of course the wheels go outside the splitter. They also make the splitter rock solid when using the tool, no rocking when splitting the log. When a log is split enough the two handles can be used to pry the log apart instead of continuing to pump the handles. A lopper can be used to cut wood that does not want to separate. Ten ton log manual splitter. Also use a metal spacer for short logs if you can find one. I use a short I beam.
All very good points. Thanks for the helpful comment!
Excellent!
U should also put stabilizers bars on the splitter
Great improvement on the splitter. Those small original wheels are only good on solid surfaces like concrete. And how often do you chop wood on the DRIVEWAY ? ? ? Thanks for the info on the centering drill guide. J K
Yup. The thing rolls great across the driveway but as soon you hit the yard she flips over. Great idea.
Exactly!
@@GettinJunkDone what size axle did you use?
Can you list the parts you used and where you found them? This video is exactly what I was looking for. This looks to be the ideal fix for this very useful tool by Harbor Freight and the others like it. Thanks.
Great hack! My first thought was ok now it won't lay level when it's on the ground. But who cares, it should still junction just fine. I'll do it to mine at some point. I will probably change the axle location so it will still store upright, or keep the same axle location and weld a little kickstand on it if needed. Also might go for non-pneumatic solid tires instead. Maybe some old oversized push mower wheels just to keep it cheap and low maintenance. Thanks for the vid!
You also want to put a inerchangable three star or four star spliter at end make the job faster and effective
Brilliant!
Thanks!
Great video! I which you would make a kit for the rest of us that don't have the time to perform such detailed work.
All your doing is putting a simple axle through the existing holes and putting the wheels on the end, if you know how to split wood you should be able to do this
Am planning to add a small base with wheels myself.
Nice idea, but I wouldn't waste my time with it. I picked one up from a neighbor who never got it working. I did by adding hydraulic oil. The seals leak on many and they just don't last long. It's a harbor freight product so don't expect it to last long
Excellent mod for moving it around on uneven terrain. The one problem I see is that it won't stand vertically for storage anymore.
Well I'll be dammed.... I'm gonna do this also on mine... haven't even took it out the box yet👍🏾
Ok I’m not that handy with drills and such especially in steel. Just put it on a luggage tote and pull it where I need to. Works great!
I have this same splitter but it lives in a barn so does not need to be moved far. I do have a problem though and I don't know how to fix it. It started leaking hydraulic oil due to a worn O ring on the left hand pump. I fitted a new O ring which fixed the leak but the pump is no longer advancing the ram properly. It advances when you pull the lever but the ram goes back to where it was on the return stroke. I think it must be a ball valve not seating properly but I don't know which one.
Sounds like there might be some air in the system. Not sure, but that is the first thing that comes to mind. Kind of like mushy brakes that need to be bled.
@@GettinJunkDone I did try the bleeding method given in the instructions and another method I saw on RUclips but it made no difference. I also changed the hydraulic oil but that made no difference. I checked the ball valve under the pump itself but I think that is just for when you are drawing oil from the reservoir into the pump. I think the one giving trouble is under the ram cylinder.
How does it work when splitting? Does it roll away? I’ve considered doing this to mine but I decided not to because the wheels from the factory allowed the splitter to sit flat while in use, but those wheels would seem to elevate it and the bottom of the Splitter wouldn’t touch the ground.
just seen this....pretty cool!.....hey whats that song?....i play guitar, and was just wondering. thanks again!
Hey, thanks for the comment. I plan to bring this up during my Live Stream tonight, Episode 24, 7 pm EST
What size axle did you use?
Dammm I keep leaving comments... sorry but I really love this idea... looks like it'll make it more sturdy also? Less likely to tip over??
Have you ever bled the air from your splitter? I haven't seen a decent video on how it's done.
Shud put a washer inside btween wheels/chassis so u dont wear out the rims. Otherwise great idea.
Gaenl and I will
Do these make any difference when splitting?
Nope. Still works the same way.
Of course the warranty was voided the instant you took the drill to it - but the resale value shot up to $175 - $225... Wood splitter mods - more useful than Jeep mods lolz
I have tried both Firefox and Chrome and it freezes for me too
lubricate it
How well does this splitter work?
Mine works great but I only use it for my off-set smoker and an occasional fire pit.
Oh and whoever that one thumbs down is... they just jealous... period. 😂😂
👍
coulda just put it on a sled. Drag it.
Like attach an actual small metal "sled" on the bottom.
In video it didn't say what size wheels were used.