No ,,to go under must be a washer with out the pedestal or if you don't have access to the back you can always take the pedestal door out and work from there.. thanks for your video very helpful..for people to save money..I'm a technician for 25 Years
@@nosmokingzoneWasher sits on pedestal; on mine, you open the drawer and the three screws holding the bottom of the panel on the machine are easily accessible. Kenmore put all T-20 Torx type screws on mine. You can get T-20 screwdriver, or get a hex drive set of Torx bits and use a hex driver to do the work - if the driver is not magnetized, the bit will fall out and roll under the pedestal every time the driver w/bit is pointed down. Wera bits and screwdrivers are made to hold the bits on tightly while you're using their brand of tools.
Good morning on this beautiful Sunday...couple of weeks ago I found your video and I have a washer and dryer exactly like yours and my washer was not draining and I did exactly what you did with your washer and my washer is working now I Thank you so much for that..... Now my dryer will start and stop after 5 seconds and do the same thing all over again,could you please help me because these machines are very high for maintenance...
Good Morning Ruth, beautiful indeed. I'm glad the washer is working for you again. That's a big relief. As for the dryer, are there any error codes or lights flashing? The dryer vent could be blocked or the breaker could be loose. Make sure the lint trap is cleaned before/after each cycle. Try taking off the exhaust pipe and running a cycle to see if it works. If it works, then you know you have a clogged exhaust pipe. You can also try running it without any clothes or a very small amount of clothes to see if it runs.
My Samsung washer wouldn’t spin (saying UB) so I cleaned the filter but it won’t spin the clothes fast enough (they spin like they are are the washing cycle, slow) so by the time the cycle is complete, they are soaking still
I looked up the Samsung code UB and it says typically, the Samsung washer error code UB is called: unbalanced load (too few / many things); twisting of linen; non-observance of the rules of washing (lack of a bag for shoes, improper combination of fabrics). Hope that helps.
@@robert997 yea the ub eventually goes away (I cleaned the filter again) but the main problem for me is that when it’s on spin, it doesn’t spin fast enough- the clothes are soaked so I have to wait a few hours then put them in the dryer
Been living without washing machine before.. Always use hands to wash And when I married to my husband, he has washing machine in his house.. When I turn it on, the machine broke, it won't work Now, my mother-in-law asked me to turn on the machine for second time and this time the machine spin too fast and won't stop 😭😭 what the hell is happening
Wow sorry to hear that. Try using a slower spin setting. If your washer doesn't have that or if that doesn't work, try calling a local washing machine repair service to take a look. It usually only costs one hour of service to diagnose the problem. It's definitely worth doing.
@@robert997 underneath the washer I'm not sure where the water is coming from but I know it's coming from the washing machine and it just barely spins now well really slow
Not all hero's wear capes you my friend are a true American hero
Nice job. Succinct and clear. Just the motivation I needed. The only thing that could be better is showing the nasty junk you pulled out.
Thanks so much. I thought of making the video for you guys right after I emptied it! Glad I could help.
No ,,to go under must be a washer with out the pedestal or if you don't have access to the back you can always take the pedestal door out and work from there.. thanks for your video very helpful..for people to save money..I'm a technician for 25 Years
instablaster...
You saved us a lot of $ ! Great video thank you 😊
My pleasure. Glad my video helped you!
Whisper quiet narrator does not want to wake the kids lol
If you tilt the washer its an access panel under the washer hold by 2 screws easy access to the water pump👍
Even with the pedestals attached?
@@nosmokingzoneWasher sits on pedestal; on mine, you open the drawer and the three screws holding the bottom of the panel on the machine are easily accessible. Kenmore put all T-20 Torx type screws on mine. You can get T-20 screwdriver, or get a hex drive set of Torx bits and use a hex driver to do the work - if the driver is not magnetized, the bit will fall out and roll under the pedestal every time the driver w/bit is pointed down. Wera bits and screwdrivers are made to hold the bits on tightly while you're using their brand of tools.
Good morning on this beautiful Sunday...couple of weeks ago I found your video and I have a washer and dryer exactly like yours and my washer was not draining and I did exactly what you did with your washer and my washer is working now I Thank you so much for that..... Now my dryer will start and stop after 5 seconds and do the same thing all over again,could you please help me because these machines are very high for maintenance...
Good Morning Ruth, beautiful indeed.
I'm glad the washer is working for you again. That's a big relief.
As for the dryer, are there any error codes or lights flashing?
The dryer vent could be blocked or the breaker could be loose.
Make sure the lint trap is cleaned before/after each cycle.
Try taking off the exhaust pipe and running a cycle to see if it works. If it works, then you know you have a clogged exhaust pipe.
You can also try running it without any clothes or a very small amount of clothes to see if it runs.
Thank you for sharing your awesome! vide it was very helpful
My pleasure Greg!
thank you. i was able to fix my washer with this video.
That's awesome Steve. Glad I could help 👍
What type of screwdriver do you use for those weird screws? Allen wrench?
I believe I used a Torx bit in my cordless Bosch drill. It took me less than two seconds per screw.
My pump is facing the front and I can’t drain it
Mine still won't spin fast any idea
Try unplugging the washer for 5 minutes, making sure you do a smaller load first, then check the drain plug again.
How how to read program Whirlpool front load washer
My Samsung washer wouldn’t spin (saying UB) so I cleaned the filter but it won’t spin the clothes fast enough (they spin like they are are the washing cycle, slow) so by the time the cycle is complete, they are soaking still
I looked up the Samsung code UB and it says typically, the Samsung washer error code UB is called: unbalanced load (too few / many things); twisting of linen; non-observance of the rules of washing (lack of a bag for shoes, improper combination of fabrics).
Hope that helps.
@@robert997 yea the ub eventually goes away (I cleaned the filter again) but the main problem for me is that when it’s on spin, it doesn’t spin fast enough- the clothes are soaked so I have to wait a few hours then put them in the dryer
Mine does this aswell. Have you fix this issue?
Next time use a aluminum pan to catch the water better then a towel😉
You my friend are a genius.
@@robert997 good video, also, two Robs make a right!
SUPER SUPER!!!
Why would a filter cleaning fix slow spin? This only works if the washer wont drain
Probably because of a sensor detecting that it's not empty so it doesn't ramp up the speed to full.
Donde localidad?
No clue where localidad is but I hope the video helped you!
Thank you
My pleasure. I hope it helped 👍
Been living without washing machine before..
Always use hands to wash
And when I married to my husband, he has washing machine in his house..
When I turn it on, the machine broke, it won't work
Now, my mother-in-law asked me to turn on the machine for second time and this time the machine spin too fast and won't stop 😭😭 what the hell is happening
Wow sorry to hear that. Try using a slower spin setting. If your washer doesn't have that or if that doesn't work, try calling a local washing machine repair service to take a look. It usually only costs one hour of service to diagnose the problem. It's definitely worth doing.
Louder please
My baby was sleeping! Hopefully it still helped you!
Leaking alsy
What's leaking also?
@@robert997 underneath the washer I'm not sure where the water is coming from but I know it's coming from the washing machine and it just barely spins now well really slow
Why are we whispering..?
My baby was sleeping! I hope you still got some good information from it.
L
Can barely hear you... Speak up!!!
Ha! Sorry I was constantly practicing my indoor voice because of our baby.
Volume is fine..maybe you need to turn up your volume or buy better speakers.
Use captions