⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
This did not work out so easily. But I did not have the plastic cover so that was a bonus. I had to do it myself with no lift. I use blocks of wood to get it. But a word of advice is do not tighten the side bolts that hold the frame together. Leave all of those loose. Just enough to hold it all together. And then mount it to the car from underneath. I also could not get the muffler to remove the gasket. So I used straps to pull the muffler off to the side. Then I worked one bolt in on each side. Also use WD-40 and spray it in the holes under the van. The bolts cross thread very easily. So I got 5 1/2 in. One is cross thrreaded. It took me 3 hours.
have a 2015 sienna XLE. Bought a curt hitch made for this model. What a piece of shit how in the world can they produce a hitch that constantly hits the ground????? mean if you produce this fora car or van do they not have any quality control. Every time use my car have to remember to drive sideways out of shopping center not to hit the ground wonder when accedently hit another car. What a bunch of crap.
@@kovalenkoihor4325 yes it is. When its mount on the car i cant drive into a stripmall here in LA without hitting the ground. Very stupid design. I payed 150 dollar for nothing its in my garage i cant sell it to anyone with a good mind you know. Very annoying.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
i know Im kinda randomly asking but do anyone know a good place to stream new tv shows online?
@Brody Jeremiah i would suggest Flixzone. Just search on google for it =)
@Alessandro Cristian Definitely, I have been watching on Flixzone for since march myself :D
@Alessandro Cristian Thanks, I went there and it seems like they got a lot of movies there :D I appreciate it!
@Brody Jeremiah no problem :D
how do you put the plastic cover back?
That’s thé hardest part 😂
Just cut it
You don't
Same way you took it off except you cut for the hitch
This did not work out so easily. But I did not have the plastic cover so that was a bonus.
I had to do it myself with no lift. I use blocks of wood to get it. But a word of advice is do not tighten the side bolts that hold the frame together. Leave all of those loose. Just enough to hold it all together. And then mount it to the car from underneath. I also could not get the muffler to remove the gasket. So I used straps to pull the muffler off to the side. Then I worked one bolt in on each side. Also use WD-40 and spray it in the holes under the van. The bolts cross thread very easily. So I got 5 1/2 in. One is cross thrreaded. It took me 3 hours.
Nice tutorial. Now I just need to buy a torque wrench to install my hitch receiver
Thanks brother it was really helpful
Do you have the video for wiring the hitch to the car?
How about plastic cover, no trim and no need to put back?
Lazy
Thank you so much guys!!! You saved me a lot of money!!!😊
Thanks for great video. Why not just Dremel an opening in the cover so you don't have to remove it for the left side ?
Very helpful thanks 🙏
Have trouble getting right side holes aligned and it’s the exact same hitch you guys installed. Did you all have the same issue?
What size are the 6 screws? Thanks for the information
M12 1.25 x 40mm
Ty!
Nice video dudes
hi,how do ypou call this plastic protection cover that you just take off?
i need one
thanks
Gervais
very cool...Thanks guys
Thank u
Love watching that guy use a torque wrench wrong. Hahaha -
Torque wrench - Clicks
Keeps pulling
Keeps pulling
Cameraman - Ok! that's it there.
Woo ,
CAN YOU INSTALL A FRONT HITCH ON THE SIENNA IF SO WHAT PART NUMBER THANKS.
They don’t know what they are doing, watch the video in Uhaul an E trailer,
I don't know what you did
You didn't even cut the cover and install it back on the vehicle!?? Lazy and unprofessional
Are you an expert
have a 2015 sienna XLE. Bought a curt hitch made for this model. What a piece of shit how in the world can they produce a hitch that constantly hits the ground????? mean if you produce this fora car or van do they not have any quality control. Every time use my car have to remember to drive sideways out of shopping center not to hit the ground wonder when accedently hit another car. What a bunch of crap.
Do you mean, that it's too low to the ground? I thought so as well.
@@kovalenkoihor4325 yes it is. When its mount on the car i cant drive into a stripmall here in LA without hitting the ground. Very stupid design. I payed 150 dollar for nothing its in my garage i cant sell it to anyone with a good mind you know. Very annoying.
@@Idontlikethisever Thanks. That was my concern too.
Awesome job thank you