Hi there! I have a Pet Grooming Trailer. It is made with .040 aluminum trailer and it is all white. I do not know the differences in Aluminum but I am told it is .040 aluminum and it is white not silver. Don't know the difference but I would like to buff and wax. Any suggestions are greatly appreciated!
Do you think this would work with aluminium that's about 4 or 5 times more corroded? Also is there much difference between a $100 dollar vs $600 buffer, in terms of how good the finish is?
Yes it will work. Consider wet sanding first. Don't let jabbing the right tool stop you. People used to polish things by hand and it looked great. Usually more expensive polishers do the work faster
There are some great chemical aluminum cleaners, like Purple Power or Starbright. You spray it on with a spray bottle, let it work for a few minutes, then hose it off. It works well, and provides a great base to begin polishing!
Didn't do paint. Ours was too thin and old. I suggest determining if there is a clear coat, if there is follow car detailing procedure. If there is no clear coat, you need to be a bit more careful look at buffing older cars etc. The only concern is burning right through the paint. What year is it?
Actually dont own the boat anymore. I'm sure it would work nicely. Also would work good with a microfiber cutting pad or rotary buffer with wool. Thanks for the comment!
urbanimage depends how often you use the boat condition etc. For us about 1 year without wax it still looks shiny after a year just noticeably reduced. If you waxed I imagine a very long time.
Hi, Thank you for your reply. I'm surprised that it lasts that well. I'm in the UK and have an aluminium canal narrowoboat that needs re-painting or possibly stripping back and polishing, which is why I was interested in your in your experience.
@@OutdoorsmanChannel next time use a brown roush bar and a cutting pad and for finish use white pad cotton with white diamond or best zephyr 40 and u will see a bid difference
looks good. I'm glad I found your video because I have the same torq 10fx for car detailing and I was going to use it on my bass tracker. I am thinking about buying a cheap rotary buffer at harbor freight and see if it will do a good job vs the dual action with clutches.
I'm not surprised that putting oil on metal makes it look very shiny. If you actually want to polish it and make it last I suggest a quality polish and wax. Thanks for watching!
@@OutdoorsmanChannelI understand your response but perhaps it would suprise you to know that wd40 was designed as a solvent and there's more going on that just making it shiny with oil.. give it a good rub with wd40 solvent, it gets smooth nice and quickly, costs hardly anything, clean it off, polish it.. good to go..
Wouldn't use steel wool on aluminum. Marine stores sell bronze wool for boats which doesn't rust. Wet sanding with 3000 grit does a great job but is a lot of work.
This was helpful. I'll definitely use this knowledge next time I polish my boat.
Hi there! I have a Pet Grooming Trailer. It is made with .040 aluminum trailer and it is all white. I do not know the differences in Aluminum but I am told it is .040 aluminum and it is white not silver. Don't know the difference but I would like to buff and wax. Any suggestions are greatly appreciated!
Treat it like you are buffing paint. If it's painted be less aggressive. Lighter polish and dual action polisher
@@OutdoorsmanChannel Thank you!
Do you think this would work with aluminium that's about 4 or 5 times more corroded? Also is there much difference between a $100 dollar vs $600 buffer, in terms of how good the finish is?
Yes it will work. Consider wet sanding first. Don't let jabbing the right tool stop you. People used to polish things by hand and it looked great. Usually more expensive polishers do the work faster
There are some great chemical aluminum cleaners, like Purple Power or Starbright. You spray it on with a spray bottle, let it work for a few minutes, then hose it off. It works well, and provides a great base to begin polishing!
Looks great! Just picked up a Lund with the same paint and aluminum bottom. Curious how you cleaned up the paint?
Didn't do paint. Ours was too thin and old. I suggest determining if there is a clear coat, if there is follow car detailing procedure. If there is no clear coat, you need to be a bit more careful look at buffing older cars etc. The only concern is burning right through the paint. What year is it?
How often do you do this?
It looks great! I live in Michigan with a lot of tannic acid in the water towards fall.
If you keep it waxed and clean not often. If not it will oxidize pretty quick
were you able to get rid of the swirls? I've tried multiple ways and still have swirls.
Swirls on the actual metal or on paint?
@@OutdoorsmanChannel on the metal
@@rossvanpraag8113 This should work fine. You can also wetsand.
All you need is some Mothers Mag & Chrome cleaner and a cheap car buffer. You can do the whole boat in about an hour.
Yes more than one way to skin a cat. This is the way I prefer to do it.
You would most likely get a better result with a rotary buffer and using a less aggressive pad that does more polishing and less cutting.
Yes your right. It would be much faster, but I wanted to show the results of a dual action.
Landen Gruenloh You are exactly right., I use mothers mag and chrome polish an a car buffer. He’s doing it the hard way...
Rotary.polisher wool pad and nuvite polish different grades use the s last to remove swirl marks and mirror shine
Yes definitely another good method. Thanks for watching!
Nice video, good finish.
+MARINE POLISHING Thanks. Don't forget to subscribe. I will be having some fiberglass videos coming out soon.
Try Mothers Mag and Aluminum Polish, very cost effective. I like 3m products on Gel Coat, Finesse It 2, but kind of expensive.
Actually dont own the boat anymore. I'm sure it would work nicely. Also would work good with a microfiber cutting pad or rotary buffer with wool. Thanks for the comment!
very helpful, thank you
Glad to help
Interesting video. How long does the shine last before the aluminium oxidises ?
urbanimage depends how often you use the boat condition etc. For us about 1 year without wax it still looks shiny after a year just noticeably reduced. If you waxed I imagine a very long time.
Hi, Thank you for your reply. I'm surprised that it lasts that well. I'm in the UK and have an aluminium canal narrowoboat that needs re-painting or possibly stripping back and polishing, which is why I was interested in your
in your experience.
@@OutdoorsmanChannel next time use a brown roush bar and a cutting pad and for finish use white pad cotton with white diamond or best zephyr 40 and u will see a bid difference
To prevent oxidation apply as many coats u want of ceramic coat it will make the finish last longer
looks good. I'm glad I found your video because I have the same torq 10fx for car detailing and I was going to use it on my bass tracker. I am thinking about buying a cheap rotary buffer at harbor freight and see if it will do a good job vs the dual action with clutches.
Trevor Alexander Yea I've never seen it been done. Thanks for watching don't forget to subscribe!
Take the 12'' side polish
CAUTION!
If you get the boat to a mirror finish you will scare the fish off when they see themselves.
Next time use dawn and water. Quick wax adds wax that you will have to buff through
It's a detail spray I didnt think there was wax in it, but I could be wrong. Thanks for the tip.
Good information very informative. Nice boat
مشاهدة بدي كرين نوع جردان سلفرادو
I just watched someone use wd40 and the results are amazing.. prob best to just use that and then a random cheap polish..
I'm not surprised that putting oil on metal makes it look very shiny. If you actually want to polish it and make it last I suggest a quality polish and wax. Thanks for watching!
@@OutdoorsmanChannelI understand your response but perhaps it would suprise you to know that wd40 was designed as a solvent and there's more going on that just making it shiny with oil.. give it a good rub with wd40 solvent, it gets smooth nice and quickly, costs hardly anything, clean it off, polish it.. good to go..
@@hychap And, it lures bass! since WD40 is made from fish oil.
what up my guy needed a wheel
use 0000 Steel Wool
Wouldn't use steel wool on aluminum. Marine stores sell bronze wool for boats which doesn't rust. Wet sanding with 3000 grit does a great job but is a lot of work.
orbital
RockinRob71343 Yes they work better. Wanted to show results of dual action. Don't forget to subscribe!
@@OutdoorsmanChannel He means "random orbital". Orbital just means rotary.
Its aluminum not rocket science, spit and a donut would work.
Thanks for watching
you're so handsome..