@@stilostan-the1st for rust i have other creators, sometimes watch rust too but his editing style for those videos etc doesn't really match what i'm looking for, i discovered him too when he was still playing rust and have watched his videos, but i think the car content he makes is better, just my personal opinion :')
right, for me its just the storytelling and his calm as fuck voice. bro sounds like he is in animal planet or some shit but it fucking work soooooo good
Hey benny, mad early here so just wanted to say i started watching you about a year ago and you've quickly become my favorite automotive creator. I've loved every single one of you vids, keep this shit up man much love ❤
Being a mechanic for a little bit now makes you forget stuff like changing tires and reading codes isn’t as simple as it is now vs when we all started haha. the moment he realized he forgot the valve stem was priceless 😂😂
Hey mate a few little quirks when it comes to getting a 350Z ready to drift Higher pressure radiator cap, oil cooler, power steering return line filter, cut pink wire with blue stripe to ecu pin 64 also get a spare fuse for the main box in the engine bay so that you have one intact for the street and one that shuts off the abs for drifting (large pink case triple fuse pull the clear cover off and cut the two smaller ones leaving the large one intact). Handbrake is shit you will need to do dual caliper mod and because you have a track model it means acquiring a set of factory rear Brembo''s for the upgrade (calipers need to be the same for rotor size and correct spacing would also recommend some upgrade pads). You will also need a diff brace! This along with the basic angle kit from GKtech and you should be right to go although I would suggest you get a nice drivers seat unless you want to be sliding around like an unrestrained 5 year old in the back of a falcon in the 70's. Good luck mate 👍
hearing about the roadworthiness requirements in europe/australia makes me glad I live in the US, where I can drive a 40yr old truck thats more rust than metal and doesn't have insurance
Your vids are for real the best on the interweb right now. You make me want to document my own adventures on the marketplace. Sick music choices in this one too.
When taking off the break callipers its always good just to zip tie em' to the spring to stop em falling down and buggering something or boinking ya on the noggin. 🤙yeww
Screw the middle piece of the lower rear bumper, up into the steel support bar. Reveals the exhaust and gets rid of the empty hole from the dual exhaust
Benny I’m with ya brother. Love your videos, been with you for a long time since the old rust days and ill be here to support as long as you keep putting out. Content.✌️
Let the trumpets sing!. After the lighter S- chassis this the next " seat- time" drifter. And there are still lots affordable ones out there that havnt been crashed yet :)
In the previous video there was a guy that said replace your cam shaft sensor when you're doing the crankshaft sensor😂😂😂 Just stumbled across to channel today. I'll be subbing! I also recently got a 350Z HR for a daily drift car. Looking forward to seeing the progress!
Yo benny if you want a cheap way to remove some of the trumpet you can do the 07-08 HR headers they are more tubular and almost bolt on. I used to drift an 03 DE and it had 258K miles when i sold it. gk tech kit, gktech lowers, offset rack spacers etc, boltons and tuned to 7k rpm with a welded and that thing never let me down. Youll really love the car man it just works
Great video mate cant wait for the next one. Tip: dont watch this video in class there is some non school rated content and it will make your mates laugh...
Thanks to Fum for Sponsoring the video: You can go to tryfum.com/BENNYSURGE and use code BENNYSURGE to get a discount on your order today
Im just happy youre getting sponsors. We would rather see more content with a few ads than fewer overall videos.
babe wake up benny surge uploaded
your not fooling anyone, everyone knows the only girl close to u is your mum
@@lachlankIt's obviously a bloke mate get with the times aye 😂
Benny surge has no foreskin bro
@@phoenixrising7047can confirm I know him personally and he calls his dad babe
nice pfp mate
Surge creates content like no other, one of a kind and my favourite car youtuber for sure.
I found him through his Rust videos, but I'm a car guy, so I stayed after Rust
@@stilostan-the1st for rust i have other creators, sometimes watch rust too but his editing style for those videos etc doesn't really match what i'm looking for, i discovered him too when he was still playing rust and have watched his videos, but i think the car content he makes is better, just my personal opinion :')
I was NOT ready for that jump cut with Rudy 💀
cleanest car edit we have seen :D
Watching your videos never get old. Your editing style is top point, from vids of games to vlogs. Legendary
Games?
One of the only youtubers that i can watch an entire video without skipping through "boring parts" good stuff benny boi. Cant wait for part 2
right, for me its just the storytelling and his calm as fuck voice. bro sounds like he is in animal planet or some shit but it fucking work soooooo good
Don't know fuck all about cars, but these videos have been bangers, surge
Hey benny, mad early here so just wanted to say i started watching you about a year ago and you've quickly become my favorite automotive creator. I've loved every single one of you vids, keep this shit up man much love ❤
Being a mechanic for a little bit now makes you forget stuff like changing tires and reading codes isn’t as simple as it is now vs when we all started haha. the moment he realized he forgot the valve stem was priceless 😂😂
Hey mate a few little quirks when it comes to getting a 350Z ready to drift Higher pressure radiator cap, oil cooler, power steering return line filter, cut pink wire with blue stripe to ecu pin 64 also get a spare fuse for the main box in the engine bay so that you have one intact for the street and one that shuts off the abs for drifting (large pink case triple fuse pull the clear cover off and cut the two smaller ones leaving the large one intact). Handbrake is shit you will need to do dual caliper mod and because you have a track model it means acquiring a set of factory rear Brembo''s for the upgrade (calipers need to be the same for rotor size and correct spacing would also recommend some upgrade pads). You will also need a diff brace! This along with the basic angle kit from GKtech and you should be right to go although I would suggest you get a nice drivers seat unless you want to be sliding around like an unrestrained 5 year old in the back of a falcon in the 70's. Good luck mate 👍
It makes me so happy when I see benny surge has uploaded
hearing about the roadworthiness requirements in europe/australia makes me glad I live in the US, where I can drive a 40yr old truck thats more rust than metal and doesn't have insurance
Hectic intro mate haha another great vid
I really liked the addition of cream to that pasta, it really tied the dish together.
I love sending your vids to mates in the u.s. so they can understand its a term of endearment
Maby repaint the front bumper and wash and polish the rest of the car! would look good af
Your vids are for real the best on the interweb right now. You make me want to document my own adventures on the marketplace. Sick music choices in this one too.
its a good day when there is a benny surge upload
surprised to see surge using roadx tires supporting the homies love to see it
it sounds like a trumpet, you bastard!
Thanks for showing us everyone's gotta learn sometime, and how not to be afraid to to learn the new stuff we've never done before.
Benny surge might be my favourite RUclipsr ong
Vibing to Twice while working on cars 💯💯💯
LOOKS DOPE
Not even into cars, but this channel is so entertaining.
When taking off the break callipers its always good just to zip tie em' to the spring to stop em falling down and buggering something or boinking ya on the noggin. 🤙yeww
Love the style of your videos. Refresh from other RUclipsrs. Also you shop is so freaking cool!
I love the COD music remix you threw in the intro. Lil easter egg back to your roots
Man ı love your editing skills nice video man ❤
Bless the algorithm for showing me this channel.
OMFG I didnt even realise that this is the garage that I watched you and your dad build. WTF DUDE FULL CIRCLE!
Bro that intro was ELITE TIER holy shit, such sick videos coming out of the benny farm
The new exhaust sounds exactly like the green 350z in the opening mission from Need for Speed: Underground 2
Screw the middle piece of the lower rear bumper, up into the steel support bar. Reveals the exhaust and gets rid of the empty hole from the dual exhaust
Long live the 350z, man what a steal!!!
I love the music sync ups with the tools in the editing. Quality mate.
Hate to say it that exhaust is the trombone special, still fine for track purposes.
yeah sounds like every other modified Z i've ever heard lol
Always a good day when benny splurge uploads
Your videos are so sick bro. Basically movie grade production, good on ya!
Ummm can’t wait to see the final build
Definitely a surprise on a Monday, surge always delivers at the best times 👍
Everytime I see a Benny surge vid pop up...I get a slight election!Love your work Benny 👌👌
Brother never fails to absolutely cook.
that intro was sick man. cant wait to see part 2
Such a sick intro! Watched it like 5 times.
that into is insane, awesome work. now onto the rest of the vid!
best edits on youtube hands down 🙌🙌
I haven’t even watched the video yet, I keep replaying that effing sick intro!! 😂
Love the song choice.
Benny I’m with ya brother. Love your videos, been with you for a long time since the old rust days and ill be here to support as long as you keep putting out. Content.✌️
TJ Hunts drift 350Z builds are pretty epic so will be cool to see what you do .
one of a kind mate loving the upload streak
Strange to think this guy used to make Rust videos. Thoroughly enjoy this new style
Man, i just watched gameplay but now with your content you made me like cars, great stuff as usual. Legend
Pump em out faster Benny, this is the only content on youtube still entertaining me
Benny serge makes the evenings better👌🏻
Let the trumpets sing!. After the lighter S- chassis this the next " seat- time" drifter. And there are still lots affordable ones out there that havnt been crashed yet :)
i fuckin love Surge and these episodes. Please never stop, keep up the good work lad
not a fan of the trumpet vq but love your content regardless
love watching this absolute journey
Mate these vids keep on getting better and better. Feel like I’m part of the crew working on the cars. Top shit mate
quickly becoming one of my favourite channels big dawg.
just discovered this channel and i gotta say, that intro was top notch. 😂
Nooo! It's over already! I need more.
Keep the videos coming. Good video 👍 Darrick from 🇺🇸 USA
Bro singing "A Horse with No Name" is truly a man of culture.
Paused the hub for a Benny upload
Mate I know nothing about cars but I love the content you make. Looking forward to more.
Wow what an intro hahah this series is going to be awsome ! I dont even like cars but ur shed building vids were awsome
You legend, loving my new merch. Gotta be the best designed youtuber T in a long time!
I just discovered your channel what an amazing editing immaculate
2 uploads this month??!! loven it bro
The R31 shirt just came in it's the new gym gear
One thing to note is that for the 350z and g35 the handbrake wasn’t designed to lock up the rear wheels, just hold the car from rolling
I hope Ben likes making these videos as much as I like watching them cause there fuckin gold!
sick fella benny surge at it again with the bangers
Bro I love your channel so much so happy to see a new face on the scene man
Good work Benny, looking forward to future episodes. Loving the build, mate.
In the previous video there was a guy that said replace your cam shaft sensor when you're doing the crankshaft sensor😂😂😂
Just stumbled across to channel today. I'll be subbing! I also recently got a 350Z HR for a daily drift car.
Looking forward to seeing the progress!
You are an absolute legend
22:14 You smooth son of a gun, watermark transition 👌
keen to see these vids keep it up
The only bad side of surge is he takes 4 Eva to upload always waiting for the next video but I’m really excited when I see him post
Yo benny if you want a cheap way to remove some of the trumpet you can do the 07-08 HR headers they are more tubular and almost bolt on. I used to drift an 03 DE and it had 258K miles when i sold it. gk tech kit, gktech lowers, offset rack spacers etc, boltons and tuned to 7k rpm with a welded and that thing never let me down. Youll really love the car man it just works
Can't wait for the end result
We need part 2 pleaseeeeeeeee
This man is living the dream.
BRO I LOVE NISSAN 350z!!!
Such a good series
Need to get some skylights in the shed
well i was suposed to study but this is better
I'd recommend an oil catch can so your engine burns less oil
black ops intro lez getttit
Great video mate cant wait for the next one. Tip: dont watch this video in class there is some non school rated content and it will make your mates laugh...
music is on point
Can’t wait for the next video
I swear these videos are the best ads for Shockworks & their team. def throwing them on just because the owner is a funny C**t :'D
Inspirational mate!
new mc server goes hard
love the edits man keep the good work up
Goated intro
ive been waiting for this one