@@ta-san9065kazuyuki-takahashi ご容赦ください。 私はこの声明をインターネット上でよく見かけますが、それは誤解です. 意図的な嘘とまではいきませんが、間違っているため誤解を招きます。 > 2V の読み取り値について指摘された点は正しいです。 だから何? > ただし、負のプレート (陰極) は、水素ガスしか生成しません! ポジティブプレート(アノード)としても、酸素のみを生成します! > 改善することはできますが、現在の設計では、酸素のみを生成する 12 個のアノードと、水素のみを生成する 1 個のカソードがあります。 ... Please pardon me. I often see this statement across the internet and it is a MISCONCEPTION. Something short of an intentional lie, yes, but incorrect and therefore misleading. > The point made about the 2V reading is correct! So what? > HOWEVER, Negative plates (Cathodes), ONLY produce Hydrogen gas! Even as Positive plates (Anodes), ONLY produce Oxygen! > It can be improved, .. but current design has Twelve Anodes producing ONLY Oxygen, and ONE Cathode producing ONLY Hydrogen.
ロバートさん コメントとアドバイスありがとうございます。 ニュートラルプレートについて調べてみました。 あなたの意見は正しいと思います。 私は解決策を考え出します。 また、市販品を購入してじっくり観察しました。 それは、 2Vで動作します。 まだ使用していませんが、シンプルで良いです。 Thank you Robert for your comments and advice. I did some research on the neutral plate. I think your opinion is correct. I come up with a solution. In addition, I purchased a commercially available product and carefully observed it. Works at 2V. Not working yet, but simple and good.
Hello, dear friend. Thank you for watching the video. The materials I used are stainless steel. 304 and 316L. 316L is less prone to corrosion. I am using 316L now. Titanium is said to be a material with good corrosion resistance, but I have never used it.arigto!
@@ta-san9065kazuyuki-takahashi thank you very much. Have you heard of platinum? I thought steel sheet with platinum coating is better. Do you have any information or experience? How many hours does 0.8 mm steel sheet have a useful life?
There is no information about platinum or platinum-coated steel. I have no experience using it. I tested SUS316L 0.8mm steel for about a year. It works fine. I heard that the service life is about 5 years. I will continue to test it.
毎回興味深くたーさんの動画を拝見しております。
私も水素発生装置を車両などに組み込むことを目論見中で参考にさせていただいております。
その中で少し疑問があるのですが、この動画でニュートラルプレートとしていた層では直接の通電が無いと思いますが水素ガスはムラなく発生しているのでしょうか。
制御装置の解説と作成動画もできたらお願いします。
これからもよい動画を楽しみにしております。
コメントいただきありがとうございます。
とても励みになります。
ニュートラルプレート間にはそれぞれ等しく電圧がかかります。ニュートラルプレート5枚・12vて使用した場合、プレート間にはそれぞれ2vの電圧が掛かり、等しくガスが発生します。
システムの説明についても今後の動画で触れていきたいと思います。
ご意見ありがとうございました!
参考になります。
ありがとうございます。
@@ta-san9065kazuyuki-takahashi ご容赦ください。 私はこの声明をインターネット上でよく見かけますが、それは誤解です. 意図的な嘘とまではいきませんが、間違っているため誤解を招きます。
> 2V の読み取り値について指摘された点は正しいです。 だから何?
> ただし、負のプレート (陰極) は、水素ガスしか生成しません! ポジティブプレート(アノード)としても、酸素のみを生成します!
> 改善することはできますが、現在の設計では、酸素のみを生成する 12 個のアノードと、水素のみを生成する 1 個のカソードがあります。
...
Please pardon me. I often see this statement across the internet and it is a MISCONCEPTION. Something short of an intentional lie, yes, but incorrect and therefore misleading.
> The point made about the 2V reading is correct! So what?
> HOWEVER, Negative plates (Cathodes), ONLY produce Hydrogen gas! Even as Positive plates (Anodes), ONLY produce Oxygen!
> It can be improved, .. but current design has Twelve Anodes producing ONLY Oxygen, and ONE Cathode producing ONLY Hydrogen.
ロバートさん コメントとアドバイスありがとうございます。 ニュートラルプレートについて調べてみました。 あなたの意見は正しいと思います。 私は解決策を考え出します。 また、市販品を購入してじっくり観察しました。 それは、 2Vで動作します。 まだ使用していませんが、シンプルで良いです。
Thank you Robert for your comments and advice. I did some research on the neutral plate. I think your opinion is correct. I come up with a solution. In addition, I purchased a commercially available product and carefully observed it. Works at 2V. Not working yet, but simple and good.
Hello, dear friend
. What should be done to prevent corrosion on the steel sheet? Is there a material that works for a long time and does not corrode?
Hello, dear friend. Thank you for watching the video. The materials I used are stainless steel. 304 and 316L. 316L is less prone to corrosion. I am using 316L now. Titanium is said to be a material with good corrosion resistance, but I have never used it.arigto!
Use the proper voltage on the electrodes. I use about 2.0-2.5V on the electrodes. Higher voltages will corrode the electrodes.
@@ta-san9065kazuyuki-takahashi
thank you very much.
Have you heard of platinum?
I thought steel sheet with platinum coating is better.
Do you have any information or experience?
How many hours does 0.8 mm steel sheet have a useful life?
There is no information about platinum or platinum-coated steel.
I have no experience using it.
I tested SUS316L 0.8mm steel for about a year. It works fine. I heard that the service life is about 5 years. I will continue to test it.
@@ta-san9065kazuyuki-takahashi GRATE.
THANKS